RCF M602 2-way Passive speaker- 2×5.5″ – 1″ – 90×90°horn – 130W

345.89 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with […]

 

Read more

M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint.
Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with reference to the several possible applications.
The M 502 has a controlled coverage through its twin 5″ and the precise constant directivity horn. The SPL and the level of undistorted sound the M 502 can reach is far above any expectation from such a compact solution.
The M 502 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn.
The LICC crossover design includes an electronic protection on high frequency device.

APPLICATIONS

  • • Multimedia Environments
  • • Conference Halls
  • • Pubs
  • • Café
  • • Background and Foreground Business Music
  • • Delay Fill
  • • Place of Worships
  • • Under-Balcony

General Specs

  • High Quality 2-way passive loudspeaker
  • 2 x 5.5″ woofer, vented
  • 1 x 1″ in driver, on 90°x90° CD horn
  • High Power Handling ‘Low Impedance Compensated Crossover\’, with electronic protection for the driver
  • 100W AES power handling
  • Steel Front Grille with robust double mesh polyester clothing
  • Rotatable RCF front logo
  • Installation points are available on the rear panel, top and bottom
  • All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)

Acoustical Specs

  • Frequency Response -10 dB:80Hz ÷ 20000 Hz
  • Max SPL @ 1m:116dB
  • Horizontal coverage angle:90°
  • Vertical coverage angle:90°
  • Directivity index; Q:9
  • System Sensitivity:92dB
  • Nominal Impedance:8Ω
  • Power Handling:100W
  • Peak Power Handling:400W
  • Recommended Amplifier:200W
  • Protections:Dynamic
  • Crossover frequencies:2300Hz

Cabinet Specs

  • Cabinet Material:MDF 12 mm
  • Hardware:6 x M6, 2 x M10
  • Grille:Steel, with a robust double mesh polyester clothing
  • Colour:Black

Size/Weight

  • Height:470 / 18.50mm/inch
  • Width:175 / 6.88mm/inch
  • Depth:185 / 7.28mm/inch
  • Net Weight:7.5 / 16.5kg/lbs

System Parameters

  • Compression Driver:1″ HF driver, 1.5″ voice coil
  • Nominal Impedance:8Ω
  • Input Power Rating:25W AES
  • Sensitivity:106dB
  • Woofer:2 x 5.5″ Woofer, 1.2″ voice coil
  • Nominal Impedance:16Ω
  • Input Power Rating:80W AES
  • Sensitivity:88dB
Weight 7.50 kg

Reviews

There are no reviews yet.

Be the first to review “RCF M602 2-way Passive speaker- 2×5.5″ – 1″ – 90×90°horn – 130W”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF M602 2-way Passive speaker- 2x5.5" - 1" - 90x90°horn - 130W removeDYNACORD VariLine VL62W Fullrange 2-Way Speaker 150W (White) removeELECTRO VOICE EVID 6.2 HIGH QUALITY Passive speaker 2-Way 6'' 150W (Black) (PAIR) removeLD Systems LDRB65SP Roadboy 65 Passive Slave Speaker 30W RMS removeBEHRINGER 1C-BK 100W 4Ω Passive Monitor Speakers 5.5'' 0.5'' Μαύρο (pair) removeDYNACORD VariLine VL62 2-Way Fullrange Speaker 150W (Black) remove
NameRCF M602 2-way Passive speaker- 2x5.5" - 1" - 90x90°horn - 130W removeDYNACORD VariLine VL62W Fullrange 2-Way Speaker 150W (White) removeELECTRO VOICE EVID 6.2 HIGH QUALITY Passive speaker 2-Way 6'' 150W (Black) (PAIR) removeLD Systems LDRB65SP Roadboy 65 Passive Slave Speaker 30W RMS removeBEHRINGER 1C-BK 100W 4Ω Passive Monitor Speakers 5.5'' 0.5'' Μαύρο (pair) removeDYNACORD VariLine VL62 2-Way Fullrange Speaker 150W (Black) remove
Image
SKU13041011E009310001754LDRB65SPE005201E009309
Rating
Price345.89 incl. GR VAT 1,399.00 incl. GR VAT676.99 incl. GR VAT 154.12 incl. GR VAT 138.00 incl. GR VAT 1,399.00 incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

AvailabilityIn stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint.
Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with reference to the several possible applications.
The M 502 has a controlled coverage through its twin 5" and the precise constant directivity horn. The SPL and the level of undistorted sound the M 502 can reach is far above any expectation from such a compact solution.
The M 502 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn.
The LICC crossover design includes an electronic protection on high frequency device.

APPLICATIONS
  • • Multimedia Environments
  • • Conference Halls
  • • Pubs
  • • Café
  • • Background and Foreground Business Music
  • • Delay Fill
  • • Place of Worships
  • • Under-Balcony

General Specs

  • High Quality 2-way passive loudspeaker
  • 2 x 5.5" woofer, vented
  • 1 x 1" in driver, on 90°x90° CD horn
  • High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
  • 100W AES power handling
  • Steel Front Grille with robust double mesh polyester clothing
  • Rotatable RCF front logo
  • Installation points are available on the rear panel, top and bottom
  • All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)

Acoustical Specs

  • Frequency Response -10 dB:80Hz ÷ 20000 Hz
  • Max SPL @ 1m:116dB
  • Horizontal coverage angle:90°
  • Vertical coverage angle:90°
  • Directivity index; Q:9
  • System Sensitivity:92dB
  • Nominal Impedance:8Ω
  • Power Handling:100W
  • Peak Power Handling:400W
  • Recommended Amplifier:200W
  • Protections:Dynamic
  • Crossover frequencies:2300Hz

Cabinet Specs

  • Cabinet Material:MDF 12 mm
  • Hardware:6 x M6, 2 x M10
  • Grille:Steel, with a robust double mesh polyester clothing
  • Colour:Black

Size/Weight

  • Height:470 / 18.50mm/inch
  • Width:175 / 6.88mm/inch
  • Depth:185 / 7.28mm/inch
  • Net Weight:7.5 / 16.5kg/lbs

System Parameters

  • Compression Driver:1" HF driver, 1.5" voice coil
  • Nominal Impedance:8Ω
  • Input Power Rating:25W AES
  • Sensitivity:106dB
  • Woofer:2 x 5.5" Woofer, 1.2" voice coil
  • Nominal Impedance:16Ω
  • Input Power Rating:80W AES
  • Sensitivity:88dB

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam

PRICE PER Pair EVID 6.2EVID Seri es Twin 6" Surface Mount Speaker System Comprised of dual 6-inch LF drivers and a 1-inch Ti/waveguide, the EVID 6.2 is perfect for applications that require exemplary audio and the capability to fill large areas with sound. Additionally, the flexible Strong-Arm-Mount? (SAM?) system provides the versatility to accommodate any installation challenge. EV's unique 6- inch dual woofer design delivers crisp and clean program for the utmost in listening experience regardless of the location. Great for larger areas that demand higher SPL levels, the 6.2 delivers the outstanding, full bass output required for shopping malls, stadiums, airports, etc. Specifications Max. SPL / 1m (calc); full space 122 dB System Power Handling (continuous/program/peak) 150/300/600 Watts Coverage (nominal -6dB) H° 100 ° Coverage (nominal -6dB) V° 80 ° Nominal Impedance 8 Ohms Minimum Impedance 6 Ohms Frequency Response (-10dB) 62 - 20000 Hz Input Connections Spring Terminal Sensitivity 1W/1m 94 dB Transformer Taps (Transformer Version Only) 70V/100V:15W, 30W, 60W Chassis Size 6 inches Weight Net 5.3 kg ( 11.68 lbs ) Dimensions (HxWxD) 419 x 228 x 298 mm (16.5" x 8.98" x 11.73“)

Roadboy 65 passive slave speaker unit

  • 30 W RMS
  • 120 W Peak  
  • 3.6 kg

Behringer 1C 100W-4Ω Monitor Speakers

 

 

  • Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production and surround-sound systems
  • High power handling capability (100 W / IEC268-5) produces full-range output with extremely low distortion
  • Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
  • Ultra-linear frequency range from 60 Hz to 23 kHz
  • Phase-optimized and high-precision crossover for absolute phase linearity
  • Auto-overload protection prevents tweeter damage and resets automatically
  • Bracket for wall/ceiling mounting included
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany

Introducing the Stylish MONITOR 1C-BK Monitor Speakers from BEHRINGER

The MONITOR 1C-BK 2-way monitor speakers offer accurate sound reproduction combined with a great design to suit your fixed installations, stereo and surround applications, home recording studios as well as audio and video productions.

Each of these 100-Watt speakers has a powerful 5 ½" woofer with a lightweight cellulose cone, a high-resolution ½" tweeter plus a phase-optimized high-precision crossover for absolute phase linearity and auto-overload protection that resets automatically. The result: full-power, ultra-linear frequency response ranging from 60 Hz all the way up to 23 kHz. They come with convenient mounting brackets for easy installation.

Looking for great sound and style? The MONITOR 1C-BK speaker definitely got it!

 

SPECIFICATIONS
Connector type Clip terminal
Wire diameter Power capacity (prg.) 100 W (IEC 268-5)
Impedance 4 Ω
Frequency range 60 Hz to 23 kHz (-10 dB)
Nominal sound pressure level (SPL) 86 dB*W/m (program, bandwidth 100 - 5000 Hz on axis, full space)
Max. short term acoustic output 112 dB @ 1m (on axis, half space)
Tweeter ½“
Woofer 5 ½“
Crossover frequency 5000 Hz
Dimensions (H x W x D) 8.9" x 5.9" x 5.6" (225 x 150 x 142 mm)
Weight approx. 4 lbs each (1.8 kg each)

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam

Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam Warranty 36 Months
Weight7.50 kg10.00 kg4.00 kg3.60 kg3.00 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.50 kg
Weight 10.00 kg
Weight 4.00 kg
Weight 3.60 kg
Weight 3.00 kg
Weight 10.00 kg