| Content | M 801 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M 801 suitable for almost any environment and architectural constraint.
Available mounting accessories allow you to use the M 801 wall or ceiling mounted, with reference to the several possible applications.
The M 801 has a controlled dispersion and delivers undistorted SPL value above any expectation from such a compact speaker system.
The M 801 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded on a constant directivity horn.
The LICC crossover design includes an electronic protection on high frequency device.
APPLICATIONS
- • Multimedia Environments
- • Conference Halls
- • Pubs
- • Café
- • Foreground Business Music
- • Delay Fill
- • Place of Worships
General Specs
- High Quality 2-way passive loudspeaker
- 1 x 8" woofer, vented
- 1 x 1" in driver, on 90°x60° CD horn
- High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
- 150W AES power handling
- Steel Front Grille with robust double mesh polyester clothing
- Rotatable RCF front logo
- Installation points are available on the rear panel, top and bottom
- All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
- Frequency Response -10 dB:65Hz ÷ 20000 Hz
- Max SPL @ 1m:120dB
- Horizontal coverage angle:90°
- Vertical coverage angle:60°
- Directivity index; Q:10
- System Sensitivity:93dB
- Nominal Impedance:8Ω
- Power Handling:150W
- Peak Power Handling:600W
- Recommended Amplifier:300W
- Protections:Dynamic
- Crossover frequencies:1800Hz
Cabinet Specs
- Cabinet Material:MDF 12 mm
- Hardware:6 x M6, 2 x M10
- Grille:Steel, with a robust double mesh polyester clothing
- Colour:Black
Size/Weight
- Height:448 / 17.63mm/inch
- Width:261/ 10.27mm/inch
- Depth:282 / 11.10mm/inch
- Net Weight:7 / 21.35kg/lbs
System Parameters
- Compression Driver:1" HF driver, 1.5" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:25W AES
- Sensitivity:106dB
- Woofer:8" Woofer, 2" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:150W AES
- Sensitivity:92dB
|
Powerful monitor-speaker - Active speaker-system for direct connection with the signal source
- 2-way speaker-system
- Clear and powerful sound
- 2-band EQ master-signal and master-signal
- Wide range of uses in spite of minimum size
- Ideal for decentral sound-surroundings, e.g. in bistros, restaurants, bars or studio
- Delivery includes mounting bracket for ceiling or wall installation
Technical Information:
| Power supply: | 230 V AC, 50 Hz ~ | | Power consumption: | 125 W | | Amplifier power: | 80 W | | Components: | 8" woofer, 1 tweeter | | Inputs: | | 1 Line In | XLR | | Outputs: | | 1 Line Out | XLR | | Max. SPL: | 90 dB | | Impedance: | 8 Ohms | | Frequency-range: | 40 Hz - 20 kHz | | Dimensions (H x W x D): | 360 x 270 x 240 mm | | Weight: | 8 kg (piece) |
|
Key Features:
- Compact enclosure
- Dual 205 mm (8 in) LF transducers
- 90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm (1 in) exit
compression driver
- Dual Neutrik NL4 connectors plus screw
terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 53 Hz - 20 kHz
Frequency Response (+/-3 dB): 65 Hz - 20 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8.9 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 7.5 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 94 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 120 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 375 W / 750 W / 1500 W
AES Standard Power Rating4: 700 W
Crossover: 2 kHz
Transducers:
Low Frequency Driver: 2 x JBL 228J, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm
(1.5 in) voice coil
High-Frequency Waveguide: PT-D95HF-1 (field rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M8 rear for OmniMount® 60.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental ratings,
use WRC or WRX.
Dimensions (H x W x D): 679.5 x 237.5 x 254.0 mm
(26.8 x 9.4 x 10.0 in)
Weight: 18.6 kg (40.9 lb)
|
The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
|
The C4128 is a full range 2 way high sensitivity, dual woofer passive system, compact and versatile specially designed for under balcony applications.
It is designed to provide extended low frequency performance from a compact, vented enclosure. It features advanced technology transducers: two 8" woofers equipped with a 2" voice coil and a 1" neodymium compression driver equipped with a 1.5" voice coil. The compression driver is mounted on a rotatable 90 x 70 constant directivity horn, providing very natural sound reproduction.
The cabinet is asymmetric (15° and 45°) for versatile under balcony applications as well as ceiling/wall installation and floor monitoring operations.
The wide coverage angle and the true constant directivity of the newly designed horn make very easy the coverage of large audiences.
| Features |
|---|
| High efficiency | | 1" neodymium compression driver with 1.5" voice coil | | Asymmetrical cabinet under-balcony/wedge monitor applications | | Active Mosfet Compression Driver Protection | | LICC Crossover | | 90°x 70° CMD (Constant Matching Design) constant directivity rotatable horn | | M10 mounting points |
Applications
- Under Balcony Applications
- Permanent Installations
- Main Reinforcement in small spaces
- Portable Systems AV Presentations
- Zone Delay and Fill Systems
- Stage monitor in multimedia environments, auditoriums house of worship
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 100 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 150 Hz | ÷ 15 kHz | | Max SPL @ 1m: | 122 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 70° | | | Directivity index; Q: | 9.25 | | | System Sensitivity: | 96 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 400 Watt | | | Peak Power Handling: | 1600 Watt | | | Recommended Amplifier: | 800 | | | Protections: | Dynamic | | | Crossover frequencies: | 2100 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1" HF driver , 1.5" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 109 dB | | | Woofer: | 2 x 8" woofer, 2" voice coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 200 Watts AES | | | Sensitivity: | 94 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 10 mm birch plywood construction | | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, white, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 650 / 25.59 mm/inch | | | Width: | 260 / 10.23 mm/inch | | | Depth: | 299 / 11.77 mm/inch | | | Net Weight: | 17.4 / 38.36 Kg/Lbs |
| The Electro-Voice ZX1i is the new standard of no compromise audio performance and versatility in an easy to install, compact sound reinforcement package.
The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small cabinet loudspeakers and enables exceptional low-frequency response without vent noise.
ZX1i installation is incredibly simple with the included QuickSAM mounting system. The QuickSAM system is a unique, integrated mounting bracket which is virtually foolproof. It allows the installer to simply snap the speaker onto the bracket, then tighten it to the desired position. For array mounting, there is an optional array bracket kit available which allows multiple units to be mounted together for a variety of configurations. |
Reviews
There are no reviews yet.