MACKIE CR3-XBT ACTIVE MONITOR 3” 50W (Pair) with bluetooth

The Mackie CR3-XBT is a pair of Bluetooth-enabled Creative Reference Series 3\" multimedia monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 50W of amplification driving 3\" woofers and 0.75\" tweeters, the CR3-XBT monitors work well whether you\'re creating content or casually enjoying some tunes.

The pair consists of one passive speaker and one powered speaker that connect with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end, and a specially designed waveguide for clarity and proper dispersion of high frequencies.

With plenty of I/O provided, the CR3-XBT can accept a wired connection from your audio interface or computer soundcard, or a wireless stream via Bluetooth from your mobile device. Either way, your music can be pumped out to the drivers or your favorite headphones.

The CR3-XBT features a download for ProTools | First and The Musician\'s Collection plug-in package including 23 high-quality plug-ins with BBD Delay, Eleven Lite, 304E EQ, and 304C Compressor.

Characteristics:

• 3\" Polypropylene-Coated Woofer
• 0.75\" Silk-Dome Tweeter
• 50W Amplifier
• All-Wood Cabinet

• For recording, mixing, sound design, gaming, and casual listening
• All-wood cabinet with a brushed-metal front panel
• Built-in Bluetooth receiver enables wireless music streaming from your smartphone, tablet, or Bluetooth-enabled computer
• RCA and 1/4\" inputs accommodate balanced or unbalanced stereo line-level signals from your audio interface, mixer, soundcard, or mobile device
• Front-panel 3.5mm headphone port auto-defeats speaker output
• 50W of amplification drive the 3\" polypropylene-coated woofers and 0.75\" ferrofluid-cooled, silk-dome tweeters
• Speaker placement switch lets you choose which side to use for the on/off/volume control
• Includes a 3.5mm to stereo RCA cable for connecting your computer to the speakers and a speaker cable to connect the left and right monitors

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

PRICE PER UNIT

The original A5

The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009).

The new A5X

The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that.

Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this.

A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics.

Stereolink

A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "The A5X: a superb impression.“

"A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10)