Content |
Compact and portable at 12 lb, this pair of 50W CR4BT Multimedia Monitors from Mackie provides audio playback in home and studio environments. As such, they are useful for mixing music or post-production sound, and they boast Bluetooth capability to boot.
The pair consists of one Class AB amplifier-powered monitor and a passive un-powered monitor that you can connect with an included stereo cable. For the low-end, these speakers utilize 4" polypropylene-coated woofers and a rear port tube, while the highs are handled by 0.75" silk dome tweeters; all of this ensures a frequency response of 70 to 20,000 Hz with a maximum SPL of 100 dB.
A switch allows you to select whether the powered speaker will function as the left or right monitor. This is particularly helpful when you must position the speakers near power outlets, or when you have to decide whether you'd rather have your front-panel volume knob situated on your left or right. Also adorning the monitor's front are an LED (indicating whether or not your monitors are on at any given time) and a dedicated headphone output (for private listening; please note that plugging your headphones in will silence the monitors themselves).
You can connect mobile devices and other devices directly to the monitors via 1/8“, 1/4" or RCA inputs—but then again, feel free to skip all that and just go with Bluetooth. The monitors also come with isolation pads for reducing the transmission of structural vibrations.
- 50W peak, 28W RMS
- RCA, 1/8“, and 1/4" TRS balanced and unbalanced inputs
- Supports Bluetooth and stereo headphones
- Lightweight at 12 lb
- Switchable L/R configuration for convenience
- On-board volume knob
- Wood cabinet
- Multiple necessary cables included
- Acoustic isolation pads included
Frequency Response
| 70 Hz to 20 kHz at -3 dB
60 Hz to 20 kHz at -10 dB | Maximum SPL | 100 dB | Crossover Frequency | 3 kHz | Low Frequency Transducer | 4.0" / 102 mm polypropylene-coated woofer | High Frequency Transducer | 0.75" / 19 mm silk dome tweeter | Amplifier (Power) | 28 W RMS / 50 W Peak | Class | AB | Input Type | Balanced / unbalanced 1/4" TRS, unbalanced RCA (Rear), 1/8" TRS (Front) | Input Impedance | 20 kOhms balanced bridging
10 kOhms unbalanced | Output Type | 1/8" stereo headphones (front) | Bluetooth | Bluetooth Protocol: 3.0
Bluetooth Function: Audio streaming | Enclosure | Solid MDF | Finish | Black vinyl wrap | Port Configuration | Custom-tuned rear port tube | Damping | Adiabatic batting | Operating Temperature | 32 to 104°F / 0 to 40°C | Power Requirements | United States: 120 VAC, 60 Hz | Power Consumption | 72 W with music, loud mix | Dimensions ( H x D x W) | 8.8 x 6.1 x 7.3" / 224 x 155 x 185 mm | Weight | 12 lb / 5.4 (pair) |
|
MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Acoustical Specifications |
---|
Frequency Response -3 dB: | 35 Hz | ÷ 20 kHz | Max SPL: | 116 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 70° | | Compression Driver: | 1" neo, metal dome | | Woofer: | 8" neo, ICC technology | |
INPUT/OUTPUT SECTION |
---|
Input connectors: | combo XLR/Jack | | Input sensitivity: | -6/+6 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1800 Hz | | Protections: | thermal, excurs., rms | | Limiter: | soft limiter | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
AMPLIFIER SPECIFICATIONS |
---|
High frequencies: | 100 Watts | | Low frequencies: | 200 Watts | | Cooling: | convection | | Connections: | vde | |
CABINET |
---|
Cabinet Material: | die cast aluminum | | Hardware: | orientation adjustable stand | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 430/17 mm/inch | | Width: | 310/12.2 mm/inch | | Depth: | 300/11.8 mm/inch | | Net Weight: | 16.150/35.60 Kg/Lbs |
|
PRICE PER UNIT The original A5 The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009). The new A5X The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that. Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this. A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics. Stereolink A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker. This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily. Controls and Connectors The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting. Review: "The A5X: a superb impression.“ "A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10) Mid-Woofer | | Number | 1 | Basket Ø | 5.5" (145 mm) | Voice coil Ø | 1.5" (32 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 50 W / 75 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 50 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.6 % | Long term output | ≥102 dB | Max. peak | ≥110 dB | Crossover frequencies | 2500 Hz | Input impedance | 30 KOhm | Weight | 14.6 lb (6,6 kg) | Magnetically shielded | No | Height x Width x Depth | 11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm) | Warranty | 5 Years | Delivery contents | Cinch-cable, Power cord, Manual |
|
PRICE PER UNIT S1X The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers. The smallest reference speaker The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs. The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation. Woofer | | Number | 1 | Basket Ø | 6" (156 mm) | Voice coil Ø | 1.5" (37 mm) | Cone material | HexaCone | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Woofer | 1 | Type | PWM | Amp. power RMS / music | 200 W / 280 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel | | Input Sensitivity (coarse) | ±10 dB | High Shelf EQ > 6 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR | General data | | Panel | Rear | Frequency response | 40 Hz - 50 kHz | THD > 80 Hz | ≤1.5 % | Long term output | ≥103 dB | Max. peak | ≥113 dB | Crossover frequencies | 2200 Hz | Input impedance | 10 KOhm | Weight | 13.2 lb (6 kg) | Magnetically shielded | Optional | Height x Width x Depth | 11.5" (295 mm) x 7" (175 mm) x 10" (260 mm) | Warranty | 5 Years | Delivery contents | Power cord, Manual |
|
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
- Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
- Powered bass reflex speakers with 15 watts per side and flat frequency response
- Active subwoofer with 50-watt amplifier for increased low end
- Front-mounted controls convenient located on right speaker
- Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
- Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
|
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
Specifications Frequency response (+/-3dB) : | 55Hz - 28kHz | Maximum SPL : | 107dB SPL (peak @ 1m) |
Input :
|
Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA
| HF amplifier stage : | 50W RMS, class AB | LF amplifier stage : | 80W RMS, class AB |
Electric supply :
|
Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord
|
Adjustment :
|
- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch
|
Indicators :
|
Power ON / OFF LED
Standby / ON LED
Audio Clip LED
| Woofer : | 5" Focal drive unit, Polyglass cone | Tweeter : | Aluminum/Magnesium inverted dome Focal tweeter | Shielding : | Integral by cancellation magnet | Construction : | Reinforced and damped Aluminum cabinet |
Finish :
|
Black powder cabinet
| Dimensions with spikes : | 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“) | Dimensions with table stand : | 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“) | Net weight : | 7.7kg - (17lb) |
|
Reviews
There are no reviews yet.