Mackie CR4BT Multimedia Monitors 50W with Bluetooth (Pair)

Discontinued

133.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Compact and portable at 12 lb, this pair of 50W CR4BT Multimedia Monitors from Mackie provides audio playback in home and studio environments. As such, they are useful for mixing music or post-production sound, and they boast Bluetooth capability to boot. The pair consists of one Class AB amplifier-powered monitor and a passive un-powered monitor […]

 

Read more

Compact and portable at 12 lb, this pair of 50W CR4BT Multimedia Monitors from Mackie provides audio playback in home and studio environments. As such, they are useful for mixing music or post-production sound, and they boast Bluetooth capability to boot.

The pair consists of one Class AB amplifier-powered monitor and a passive un-powered monitor that you can connect with an included stereo cable. For the low-end, these speakers utilize 4″ polypropylene-coated woofers and a rear port tube, while the highs are handled by 0.75″ silk dome tweeters; all of this ensures a frequency response of 70 to 20,000 Hz with a maximum SPL of 100 dB.

A switch allows you to select whether the powered speaker will function as the left or right monitor. This is particularly helpful when you must position the speakers near power outlets, or when you have to decide whether you’d rather have your front-panel volume knob situated on your left or right. Also adorning the monitor’s front are an LED (indicating whether or not your monitors are on at any given time) and a dedicated headphone output (for private listening; please note that plugging your headphones in will silence the monitors themselves).

You can connect mobile devices and other devices directly to the monitors via 1/8“, 1/4″ or RCA inputs—but then again, feel free to skip all that and just go with Bluetooth. The monitors also come with isolation pads for reducing the transmission of structural vibrations.

  • 50W peak, 28W RMS
  • RCA, 1/8“, and 1/4″ TRS balanced and unbalanced inputs
  • Supports Bluetooth and stereo headphones
  • Lightweight at 12 lb
  • Switchable L/R configuration for convenience
  • On-board volume knob
  • Wood cabinet
  • Multiple necessary cables included
  • Acoustic isolation pads included

 

 

Frequency Response

70 Hz to 20 kHz at -3 dB
60 Hz to 20 kHz at -10 dB
Maximum SPL 100 dB
Crossover Frequency 3 kHz
Low Frequency Transducer 4.0″ / 102 mm polypropylene-coated woofer
High Frequency Transducer 0.75″ / 19 mm silk dome tweeter
Amplifier (Power) 28 W RMS / 50 W Peak
Class AB
Input Type Balanced / unbalanced 1/4″ TRS, unbalanced RCA (Rear), 1/8″ TRS (Front)
Input Impedance 20 kOhms balanced bridging
10 kOhms unbalanced
Output Type 1/8″ stereo headphones (front)
Bluetooth Bluetooth Protocol: 3.0
Bluetooth Function: Audio streaming
Enclosure Solid MDF
Finish Black vinyl wrap
Port Configuration Custom-tuned rear port tube
Damping Adiabatic batting
Operating Temperature 32 to 104°F / 0 to 40°C
Power Requirements United States: 120 VAC, 60 Hz
Power Consumption 72 W with music, loud mix
Dimensions ( H x D x W) 8.8 x 6.1 x 7.3″ / 224 x 155 x 185 mm
Weight 12 lb / 5.4 (pair)

 

Weight 5.50 kg

Reviews

There are no reviews yet.

Be the first to review “Mackie CR4BT Multimedia Monitors 50W with Bluetooth (Pair)”

Your email address will not be published. Required fields are marked *

Quick Comparison

Mackie CR4BT Multimedia Monitors 50W with Bluetooth (Pair) removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeADAM A3X Active Studio Monitor 25W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeADAM S1X Active Studio Monitor 200W removeADAM A7X Active Studio Monitor 100W remove
NameMackie CR4BT Multimedia Monitors 50W with Bluetooth (Pair) removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeADAM A3X Active Studio Monitor 25W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeADAM S1X Active Studio Monitor 200W removeADAM A7X Active Studio Monitor 100W remove
Image
SKU 149.492Twin6 BeA3XSolo6 BeS1XA7X
Rating
Price 133.00 incl. GR VAT1,675.00 incl. GR VAT 365.00 incl. GR VAT 995.00 incl. GR VAT 930.00 incl. GR VAT 765.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Compact and portable at 12 lb, this pair of 50W CR4BT Multimedia Monitors from Mackie provides audio playback in home and studio environments. As such, they are useful for mixing music or post-production sound, and they boast Bluetooth capability to boot.

The pair consists of one Class AB amplifier-powered monitor and a passive un-powered monitor that you can connect with an included stereo cable. For the low-end, these speakers utilize 4" polypropylene-coated woofers and a rear port tube, while the highs are handled by 0.75" silk dome tweeters; all of this ensures a frequency response of 70 to 20,000 Hz with a maximum SPL of 100 dB.

A switch allows you to select whether the powered speaker will function as the left or right monitor. This is particularly helpful when you must position the speakers near power outlets, or when you have to decide whether you'd rather have your front-panel volume knob situated on your left or right. Also adorning the monitor's front are an LED (indicating whether or not your monitors are on at any given time) and a dedicated headphone output (for private listening; please note that plugging your headphones in will silence the monitors themselves).

You can connect mobile devices and other devices directly to the monitors via 1/8“, 1/4" or RCA inputs—but then again, feel free to skip all that and just go with Bluetooth. The monitors also come with isolation pads for reducing the transmission of structural vibrations.

  • 50W peak, 28W RMS
  • RCA, 1/8“, and 1/4" TRS balanced and unbalanced inputs
  • Supports Bluetooth and stereo headphones
  • Lightweight at 12 lb
  • Switchable L/R configuration for convenience
  • On-board volume knob
  • Wood cabinet
  • Multiple necessary cables included
  • Acoustic isolation pads included
    Frequency Response

70 Hz to 20 kHz at -3 dB
60 Hz to 20 kHz at -10 dB
Maximum SPL 100 dB
Crossover Frequency 3 kHz
Low Frequency Transducer 4.0" / 102 mm polypropylene-coated woofer
High Frequency Transducer 0.75" / 19 mm silk dome tweeter
Amplifier (Power) 28 W RMS / 50 W Peak
Class AB
Input Type Balanced / unbalanced 1/4" TRS, unbalanced RCA (Rear), 1/8" TRS (Front)
Input Impedance 20 kOhms balanced bridging
10 kOhms unbalanced
Output Type 1/8" stereo headphones (front)
Bluetooth Bluetooth Protocol: 3.0
Bluetooth Function: Audio streaming
Enclosure Solid MDF
Finish Black vinyl wrap
Port Configuration Custom-tuned rear port tube
Damping Adiabatic batting
Operating Temperature 32 to 104°F / 0 to 40°C
Power Requirements United States: 120 VAC, 60 Hz
Power Consumption 72 W with music, loud mix
Dimensions ( H x D x W) 8.8 x 6.1 x 7.3" / 224 x 155 x 185 mm
Weight 12 lb / 5.4 (pair)
 

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

PRICE PER UNIT

The smallest big sound ever...

With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.

A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.

Stereolink

A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "Highly recommended“

"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10)

Review: "...one of the best compact monitors“

"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)

Mid-Woofer
Number1
Basket Ø4.5" (120 mm)
Voice coil Ø1" (25 mm)
Cone materialCarbon Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypeA/B
Amp. power RMS / music25 W / 40 W
Tweeter1
TypeA/B
Amp. power RMS / music25 W / 40 W
Control panel
Input Sensitivity-∞ to +14 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response60 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.8 %
Long term output≥98 dB
Max. peak≥106 dB
Crossover frequencies2800 Hz
Input impedance10 KOhm
Weight10.1 lb (4,6 kg)
Magnetically shieldedNo
Height x Width x Depth10" (252 mm) x 6" (150 mm) x 7.5" (185 mm)
Warranty5 Years
Delivery contents

Cinch-cable, Power cord, Manual

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

PRICE PER UNIT

 

S1X

The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.

The smallest reference speaker

The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.

The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.

Woofer
Number1
Basket Ø6" (156 mm)
Voice coil Ø1.5" (37 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music200 W / 280 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)±10 dB
High Shelf EQ > 6 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR
General data
PanelRear
Frequency response40 Hz - 50 kHz
THD > 80 Hz≤1.5 %
Long term output≥103 dB
Max. peak≥113 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight13.2 lb (6 kg)
Magnetically shieldedOptional
Height x Width x Depth11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

 

PRICE PER UNIT

ADAMs A7 & A7X: the evolution of a legend

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Mid-Woofer
Number1
Basket Ø7" (175 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response42 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥106 dB
Max. peak≥114 dB
Crossover frequencies2500 Hz
Input impedance30 KOhm
Weight20.3 lb (9,2 kg)
Magnetically shieldedNo
Height x Width x Depth13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

Weight5.50 kg14.00 kg5.00 kg11.00 kg6.00 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.50 kg
Weight 14.00 kg
Weight 5.00 kg
Weight 11.00 kg
Weight 6.00 kg
Weight 10.00 kg