MACKIE PPM608 8 CHANNEL Powered Mixer

- Dual 500W Mackie designed Class-D, Fast Recovery power amplifiers
- 32-bit RMFX+ processor featuring 24 sane, useable reverbs, choruses, and tap delay for live applications
- 8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6)
- New Single In-line Compression (SIC) provides increased presence and punch for vocals and instruments
- 2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity
- Mackie's Musical 3-Band Active channel EQ (80hz, 2.5kHz, 12kHz)
- 2 built-in DI boxes for direct instrument connections
- Separate Monitor and FX auxiliary sends
- 12 segment LEDs for the Main and Monitor outputs
- Dual 7-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
- 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
- Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
- Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig.
- Classic Mackie rounded front chassis design. If the PPM rolls on its face during transport the controls are recessed and protected
- Ultra-Lightweight and portable (xx lbs/ xx kg)

Output at 8 ohms stereo: 150 watts per channel Dimensions and Weight in PackagingBase ItemShipping Weight: 34 lbs Shipping Dimensions: 23 x 17 x 16 in

A professional mixer offering two digital effect units and a 2 x 300 watts power amplifier to be used in entertainment and multimedia applications. Whether it is being used as mobile DJ-mixer, by a rental company, in a clubhouse, a hotel, a club / bistro, or in the party cellar at home: the comprehensive set of features and professional audio quality of the MP-7 Entertainment System also solves your sound reinforcement problem.

Maximum Midband Output Power, 1 kHz, THD = 1%: - into 4 ohms 2 x 340 W into 8 ohms 2 x 200 W Rated Output Power, 20Hz… 20 kHz, THD =0.2%: - into 4 ohms 2 x 300 W into 8 ohms 2 x 150 W Maximum Output Voltage of the power amplifier, no load THD @ 1 kHz, MBW=80kHz 43 Vrms MIC input to Main L/R output, +16 dBu 90 dB Channel seperation > 70 dB Input Sensitivity, all level controls in max. position: - MIC input -74 dBu (155µV) Line Input (Mono) -54 dBu (1.55 mV) CD/MD Line Input (Stereo) -24 dBu (49 mV) Phone Input (Stereo) -61.5 dBu (652 µV) Power Amplifier Input +6 dBu (1.55 V) Maximum Level, mixing desk: - MIC inputs +11 dBu Line inputs +30 dBu All other inputs +20 dBu Record Send output +14 dBu All other outputs +20 dBu Input Impedances: - MIC 1.8 kohms All other inputs > 10 kohms Output Impedances: - Record Send 1 kohms Phones 47 ohms All other outputs 75 ohms Equivalent Input Noise, MIC Input, A-weighted 150 ohms -130 dBu Noise, Channel inputs to Main L/R outputs, A-weighted: - Master fader down -104 dBu Master fader 0 dB, Channel fader down -91 dBu Master fader 0 dB, Channel fader 0 dB, Channel gain unity -84 dBu Signal/Noise-Ratio, power amplifier, A-weighted 105 dB Equalization STEREO: - LO Shelving +9/-30 dB / 60 Hz MID Peaking +9/-30 dB / 2.4 kHz HI Shelving +9/-30 dB / 12 kHz Equalization MIC: - LO Shelving ±15 dB / 60 Hz MID Peaking ±12 dB / 2.4 kHz HI Shelving ±15 dB / 12 kHz Master EQ, 2x7-band, Stereo ±10 dB Phantom Power, all MIC Inputs +24V dc Lamp +12V dc Power Requirements, factory preset, 50Hz....60Hz 100V/120V/230V/240V Power Consumption at 1/8 maximum output power 4 ohms 450 W Dimensions, (WxHxD), mm 455,5 x 175,8 x 340.6 Weight, including lid 13 kg Optional Rack-Mount-Kit MP7

• 350 watts into 4-ohm (2 x 8 ohm) speakers
• 8 Balanced microphone and line inputs
• Tape/CD inputs
• Reverb level control on each channel
• Line Out for connection to external amplifiers
• Monitor output for connection to external amplifiers
• Return input for connection of external effects processors
• Record Out for taping
• RF interference protection on all inputs
• Switchable 48 volt phantom power for support of electret microphones
• Footswitch jack for enable/disable effects
• Effects bus output for connection to external effects processing

• 2 x 400W / 4 ohms stereo power amplifier for Main L/R or Mono/Monitor
• DFX, our 32/40-bit digital multi-effect processor with 16 programs plus parameter control
• 9 balanced Mic inputs and 12 Line inputs
• Two super Hi-Z inputs specially optimized for direct instrument inputs
• 3-band EQ on channels 1 through 9
• Dual multi-band graphic equalizers with in/out switches for Main L/R and Monitor or Main L/R
• Rumble filter for Mic inputs
• Pad control on channels 1-6
• Monitor and effect sends on each input channel
• +48V phantom power for mic inputs 1 through 6
• Two built-in limiters
• Rec out with trim control for record level matching
• Mains power switchable between 115 VAC and 230 VAC
• USB record/playback module records WAV files to removable flash drive and plays back MP3/WMA files
• USB recorder and playback device for capturing all performances with ease

• 1,000 Watts RMS, 1500 Watts peak
• Subwoofer line output
• Monitor send
• Digital effects
• 8 Combination XLR/1/4 inputs
• Input pads
• Analog record output capability
• Front panel effects defeat
• FLS? exclusive feedback detection circuit
• Footswitchable effects defeat
• Dual 9-Band Main/Mon Graphic EQ
• Individual signal and clip detection LEDs
• Effect to monitor return
• Individual signal and clip detection LEDs
• Bluetooth? capability
• Four twist lock outputs
• Footswitchable master mic mute
• Optional rack mount kit available
• MidMorph? EQ
• KOSMOS? bass enhancement
• USB MP3 Player
• Selectable Main/Main or Main/Monitor power amp modes
• 3-Band EQ per channel
• Product Dimensions: 39.37 cm x 23.81 cm x 19.69 cm
• Weight Packed: 7.3 kg
• Width Packed: 34.29 cm
• Height Packed: 48.26 cm
• Depth Packed: 30.48 cm

300W 6 CHANNEL POWERED MIXER WITH USB RECORDER AND BLUETOOTH

Features:

• Built-in 2 x 150W / 4 ohms dual power amplifier for Main or Main/Monitor (Bridge mono, 300W / 8 ohms)
• 32/40-bit digital multi-effect processor with 16 programs plus parameter control and footswitch jack
• Six balanced Mic inputs and eight Line inputs (4 mono, 2 stereo channels)
• Two Super Hi-Z inputs optimized for direct instrument input
• 2-band EQ on each input channel
• 7-band master graphic EQ
• Pad control on channels 1 to 4
• AUX input
• Stereo RCA I/O
• +48V phantom power on channels 1 through 4
• Built-in limiters
• Monitor and effect sends on each input channel
• Drive level / effect out master control for signals sent to effect processor
• USB recorder/player
• Bluetooth audio streaming