Mackie ProFX4v2 Console 4 channel 16FX

Discontinued

121.79 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Console with integrated 4-channel 16 FX (ReadyFX ™ effects engine), 2 mic inputs, 4 line inputs, 2 AUX sends, Hi-Z input for direct connection of guitar, bass or other instrument, EQ 2 regions, graphic EQ stereo 5 areas for tuning mains and monitors, 100Hz low cut filter, 48V phantom power, stereo RCA tape in / […]

 

Read more

Console with integrated 4-channel 16 FX (ReadyFX ™ effects engine), 2 mic inputs, 4 line inputs, 2 AUX sends, Hi-Z input for direct connection of guitar, bass or other instrument, EQ 2 regions, graphic EQ stereo 5 areas for tuning mains and monitors, 100Hz low cut filter, 48V phantom power, stereo RCA tape in / out, balanced XLR and / or balanced / unbalanced 1/4 “main outputs.

 
Console 4 channels
Built 16 FX (reverbs, delays and choruses)
2 mic inputs
4 line inputs
2 AUX sends
Stereo RCA tape in / out
Balanced XLR and / or balanced / unbalanced 1/4 “main outputs
Hi-Z input for direct connection of guitar, bass or other instrument
Headphones output with volume control
EQ 2 regions (80Hz and 12kHz)
Graphic EQ stereo 5 areas for tuning mains and monitors
100Hz low cut filter
48V phantom power
Dimensions (HxWxD) 73x220x256mm
Weight 1,4kg.

Weight 1.40 kg

Reviews

There are no reviews yet.

Be the first to review “Mackie ProFX4v2 Console 4 channel 16FX”

Your email address will not be published. Required fields are marked *

Quick Comparison

Mackie ProFX4v2 Console 4 channel 16FX removeSOUNDCRAFT EPM 6 Mixing Desk 6 mono(mic-line-insert)/ 2 stereo removeBEHRINGER Xenyx 502 Premium 5-Input 2-Bus Mixer removeDYNACORD CMS 2200-3 Sound Desk 22 Channels removeSOUNDCRAFT GB2R 16-Channel Rackmount MIXING CONSOLE removeSOUNDCRAFT EFX-12 Mixing Desk 12CH mono & 2CH stereo remove
NameMackie ProFX4v2 Console 4 channel 16FX removeSOUNDCRAFT EPM 6 Mixing Desk 6 mono(mic-line-insert)/ 2 stereo removeBEHRINGER Xenyx 502 Premium 5-Input 2-Bus Mixer removeDYNACORD CMS 2200-3 Sound Desk 22 Channels removeSOUNDCRAFT GB2R 16-Channel Rackmount MIXING CONSOLE removeSOUNDCRAFT EFX-12 Mixing Desk 12CH mono & 2CH stereo remove
Image
SKU149.218SPIRIT EPM6E005126E003071GB2R 16CHSPIRIT EFX12
Rating
Price 121.79 incl. GR VAT 305.00 incl. GR VAT 46.00 incl. GR VAT 2,760.00 incl. GR VAT 1,456.00 incl. GR VAT 547.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Console with integrated 4-channel 16 FX (ReadyFX ™ effects engine), 2 mic inputs, 4 line inputs, 2 AUX sends, Hi-Z input for direct connection of guitar, bass or other instrument, EQ 2 regions, graphic EQ stereo 5 areas for tuning mains and monitors, 100Hz low cut filter, 48V phantom power, stereo RCA tape in / out, balanced XLR and / or balanced / unbalanced 1/4 "main outputs.

 
Console 4 channels
Built 16 FX (reverbs, delays and choruses)
2 mic inputs
4 line inputs
2 AUX sends
Stereo RCA tape in / out
Balanced XLR and / or balanced / unbalanced 1/4 "main outputs
Hi-Z input for direct connection of guitar, bass or other instrument
Headphones output with volume control
EQ 2 regions (80Hz and 12kHz)
Graphic EQ stereo 5 areas for tuning mains and monitors
100Hz low cut filter
48V phantom power
Dimensions (HxWxD) 73x220x256mm
Weight 1,4kg.

Low-cost high-performance mixers Key Features
  • 6 Mono & 2 Stereo Input Channels
  • 6x GB30 Microphone Preamplifiers
  • Recording and Live Sound Audio Console
  • Compact Mobile Enclosure
The Soundcraft EPM Series provides a straight-forward, yet professional alternative to complex audio mixers. Constructed in a 6-, 8- or 12-channel chassis, the EPM mixers are well-suited for recording and sound reinforcement applications. The EPM 6 features 6 mono and 2 stereo input channels providing the flexibility needed to accommodate the recording studio, venue or touring musician. All mono inputs feature 1/4" phone line and balanced XLR microphone inputs. The famed GB30 microphone preamps provide the quiet, detailed signal synonymous with Soundcraft\'s large FOH consoles. The stereo inputs provide L/R 1/4" phone connections and are ideal for connecting stereo devices such as keyboards, returning effects, etc. The EQ section features a sweepable mid-range on all mono channels and provides smooth frequency contouring. Inserts on all mono channels and stereo output enable signal routing to external signal processors. The compact profile, rich sound quality and flexibility of the EPM Series provides everything necessary for use in project recording, video editing, night clubs, bars, meeting halls, houses-of-worship, and more. 6 Mono and 2 Stereo Channels The EPM 6 features 6 mono microphone and line input channels, 2 stereo inputs feature L/R 1/4" phone connections Comprehensive Controls The comprehensive layout is designed to attract users who require a straight-forward mixing environment GB30 Microphone Preamplifiers All 12 mono inputs feature Soundcraft\'s GB30 microphone preamps for quiet, clean large-format FOH console quality Compact and Professional The EPM Series consoles pack a professional feature set in a compact, mobile enclosure
Total # Of Inputs 6x Mono 2x Stereo
Mic/Line Inputs 6x Line Mono: 1/4" TRS Phone 2x Line Stereo: L/R 1/4" TRS Phone 6x Microphone: 3-pin XLR
Stereo Line Inputs 2x Stereo: L/R 1/4" TRS Phone
In-Line Inputs/Returns No
AUX Sends 2x Aux Sends
AUX Returns No dedicated returns
Inserts 1/4" TRS Phone - Mono Inputs, Main Stereo Output
BUS (Group) Outputs Stereo Output Only
2 Trk Master I/O Mix L/R: Stereo Paired L/R RCA Phono
ALT I/O No
Monitor Outputs Monitor: L/R Stereo Paired 1/4" TRS Phone
EQ Section Mono Inputs +/- 15 dB Lo: 80 Hz Mid: 150 Hz - 3.5 kHz (swept) Hi: 12 kHz Q: 1.5 Stereo Inputs +/-15 dB Lo: 80 Hz Mid: 720 Hz Hi: 12 kHz
Solo/Mute All Input Channels
Channel Level Control 100 mm Faders
Trim/Gain Control Rotary Potentiometers
Phantom Power +48 V Phantom
Metering 10-Segment L/R Peak LEDs +48 V Phantom Power LED PFL Active LED Power Indicator LED
Frequency Response 20 Hz to 20 kHz +/-1.5 dB
Dynamic Range Not specified by manufacturer
Signal-to-Noise Ratio Noise (22 Hz - 22 kHz measurement bandwidth) Mic EIN @ max gain, 150 ohms source impedance -127 dBu Mix @ max, faders to down
Total Harmonic Distortion (THD) Mic sensitivity 30 dB, +14 dBu @ mix output:
  • Premium ultra low-noise, high headroom analog mixer
  • State-of-the-art XENYX Mic Preamp comparable to stand-alone boutique preamps
  • Neo-classic "British" 2-band EQ for warm and musical sound
  • Main mix, stereo CD/tape plus separate headphone outputs
  • CD/tape inputs assignable to headphone output or main mix outputs
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany

MIC/LINE Input Channels
The XLR microphone input is equipped with an extremely high quality, ultra-low noise, discrete preamp.
The +48V phantom power for condenser microphones can be switched in groups of six.
The Line Input and Channel Insert are implemented as jack sockets.
The Gain can be controlled in the range 0-60 dB.
The switchable Lo Cut filter (80Hz, 18dB/oct.) serves to eliminate low-frequency noise. A very typical DYNACORD feature is the asymmetrical Voicing Filter by means of which, if desired, the voice can be powerfully emphasized in the mix.
Optimized for ease-of-use, the 3-band semi-parametric equalizer makes it possible even for unpracticed users to perform the requisite corrections swiftly and intuitively.
With their extended buss structures, the CMS3 mixers offer very flexible configuration options. In all, 6 AUX busses are available in each case:
2 (FX) are assiged to the two effects devices;
2 (AUX) can be configured either as monitor or effects sends by means of a switch in the Main section;
2 (MON) are designed as monitor sends, each being equipped with a sweepable anti-feedback filter in the Master section.
MUTE and PFL switches, each with its own LED, make it possible to mute each input channel individually and/or listen to its pre-fader signal.
Each channel offers a Signal Present and Peak LED for level control.
The channel faders are dust-protected and offer not only excellent crosstalk attenuation but also a practice-optimized control characteristic.
All potentiometers and faders are high-quality components from ALPS.
Stereo MIC/LINE Input Channels
The stereo input channels are equipped in much the same way, but optimized, naturally, to carry stereo signals.
Two of the four stereo inputs of each model are additionally equipped with cinch (RCA) sockets switched in parallel for CD or MP3 players.
The two other stereo inputs receive in addition the four channels of the digital audio interface USB 1-2 and USB 3-4
Separate Gain controls are provided for the Stereo Line and Mic inputs to permit them to be used in parallel if desired.
Three-band tone controls are provided, and a Balance control replaces the PAN control found in the mono channel strips.
MASTER
In the Master Section, too, the CMS3 mixers are lavishly equipped.
The 11-band stereo equalizer can be routed to the Master channels or else to either or both of the Monitor Sends according to choice.
The FX1+2 Returns as well as the AUX1+2 and MON1+2 Sends are on faders just like the Master L/R signal, which makes for comfortable and intuitive operation.
The Master B signal is available pre or post MASTER L/R fader and can be mono-summed if desired. The Master signal is also available on the REC Send cinch (RCA) output with level control.
The level meters of the CMS3 comprise two LED chains of 12 LEDs each. The display range covers 40 dB; what is shown is the level in dBu at the master outputs. When the PFL switch is activated, the left-hand LED chain shows the internal level of the master buss in dBu.
The Standby switch mutes all channels e.g. during pauses, with only the 2TRACK-to-Master input remaining active for the playback of interval music.
A 4-pin XLR socket is provided for the connection of a standard 12V/5W gooseneck lamp.
DIGITAL USB 2.0 AUDIO INTERFACE  
The USB 2.0 port serves as a digital audio interface between the CMS3 and a PC or Mac. Four channels can be transmitted in either direction simultaneously. This interface can therefore be used either for the input of audio signals (e.g. for playback or interval music) or else for live- or studio-recording applications. It is configured by selecting the relevant setting in the menu.
For the use of the CMS3 with a PC or Mac, a free Cubase LE license as well as the requisite USB drivers are included free-of-charge on the supplied DVD.
PC MIDI Interface
The CMS3 also offers a fully-featured PC MIDI interface.
The MIDI input also supports the remote switching of both internal effects units using a master keyboard or MIDI footswitch.
Professional Effects, OLED Display and Processing Menus
The CMS3 has two integrated stereo multi-effects processors that work independently of one another, each offering 100 effects algorithms optimized for live performance, the most important parameters of which are editable.
Linear 24-bit AD/DA converters and 48-bit double-precision processing guarantee the finest studio quality based on state-of-the-art technology.
The 100 program locations of each device are packed with high-quality reverbs, halls and plates that deliver professional results in live performance on stage as well as in both studio and home recording environments.
Other presets include Echo/Reverb and Chorus/Echo combinations, a variety of delay, flanger, chorus and doubling algorithms, as well as special reverb and delay programs. When a delay effect is active, the delay time can be synchronized to the beat of the music using the TAP key.
Edited effects programs can be stored in the 20 User memories offered by each device, assigned names, and later selected and used in the same way as the presets.
The large, high-contrast OLED display is easily read from a wide range of viewing angles—even in very bright surroundings. The operation of the effects units and processing menus is intuitive and made easier still through the use of soft keys and a rotary encoder.
Processing Menus
For the basic settings, configuration, use of the effects and special functions, a wide variety of editing options can be selected from the clearly arranged menus.
Innovative Solution for Protection and Transportation
Optionally available for the CMS 1000 and 1600 is a very robust plastic lid with an integrated handle—a highly innovative solution that offers optimal protection for the device as well as greater carrying comfort.
For the CMS 2200, due to its greater size, a flight-case solution is recommended (available as a further option is a dust cover: the DC-PM2200-COVER).
Accessories
For rack installation of the CMS 1000 (or table installation of the models 1600 and 2200), the mounting kit RMK 1000-3 is available.
Other accessories include the gooseneck light DC-LITLITE-4P and the DC-FS11 ON/OFF footswitch for the effects units.

16 mono inputs to a stereo mix output. Rackmount version of the GB2.

The highly-acclaimed and successful Soundcraft GB Series has gained another new member, the Soundcraft GB2R. This 19 inch rack-mountable mixer is designed specifically for smaller installations in churches and performance venues, or for small portable PA systems. It will also find friends in Broadcast where its high quality and feature set will be very appealing.

Features
19 inch Rackmountable console

16 channel version, with 16 mono inputs, Stereo Mix and Mono Sum Outputs and 6 Aux Outputs. - Total Inputs to Mix: 22

12.2 channel version, with 12 mono inputs and 2 stereo inputs, 1 Stereo Sub Group Output, Mix and Mono Sum Outputs, and 6 Aux Outputs - Total Inputs to Mix: 26 (when Mics used on stereo input)

Rotatable connector pod for top or rear cable entry

8 (GB2R-16) or 10 (GB2R-12.2) busses

2 full feature stereo inputs (GB2R-12.2 version)

GB30 Mic preamp and precision EQ on inputs

Switchable +48V phantom power on every mic input

100Hz Hi-pass filter

Direct outputs on every channel

100mm faders

Stereo Mix Output and separate Mono Sum output

Record output

Internal Universal switched mode PSU

Available in two variants, the GB2R offers either 16 mono inputs to a stereo mix output, or a 12.2 version with 12 mono inputs, two full-feature stereo inputs and 2 group busses, each model having 6 auxiliary sends.

As always with Soundcraft consoles, emphasis has been placed on operational simplicity, clear and intuitive layout and the highest possible audio performance. The Soundcraft GB2R inherits both the GB30 Mic preamplifier and GB30 Equaliser designs from the GB4 and GB8.

For ease of installation, the connector section is contained in a rotatable pod, allowing cable access from the top of the mixer if sat on a table-top, or from the rear when mounted in a 19 inch rack.

On the stereo inputs on the 12.2 model, connectors are provided for both Mic and Line inputs. With Mic signals routed to the local channel, the Line inputs are available as stereo returns to the main mix bus. Two stereo returns and a 2-track (for example CD replay) input are provided, which means that the GB2R-12.2 model can offer up to 26 inputs to mix in a mixer just 19" (485mm) wide.

Every input has a pre/post switchable direct output for recording or effects sends, while an internal universal voltage PSU avoids external power supply connections.

The whole GB Series carries the high quality hallmark with which Soundcraft is synonymous, with engineering and design as you'd expect from this high-end manufacturer. Careful attention has been given to the mechanical construction, to ensure reliability and ruggedness under strenuous conditions, with all input modules being constructed with individual vertically-mounted pcb's, fitted to the steel chassis front panel with individually-nutted potentiometers.

Key Features:
  • 12+2 channel frame sizes
  • Built-in 24 bit Lexicon digital effects processor
  • 32 FX settings
  • Tap Tempo and FX setting store function
  • 1 FX send on each channel
  • 1 configurable auxiliary bus
  • XLR-type and Ό� metal jack connector sockets
  • RCA phono stereo playback inputs and record outputs
  • 3-band EQ with a swept mid on mono inputs
  • 3-band EQ on stereo inputs
  • TRS insert sockets and inserts on all mono inputs
  • Ten-segment LED output metering
  • Intuitive and comprehensive solo system
  • Headphone output
  • Easily rack mountable
Weight1.40 kg5.20 kg0.55 kg12.00 kg5.00 kg3.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.40 kg
Weight 5.20 kg
Weight 0.55 kg
Weight 12.00 kg
Weight 5.00 kg
Weight 3.50 kg