| Content |
4 "Creative Reference Multimedia Monitors, power 50W, frequency range 75Hz-20khz, MAX SPL 100dB, inputs 1/4" TRS balanced, RCA unbalanced, 1/8 "AUX, 1/8 Headphone, connect speaker to speake, dimensions (HxWxD ) 224 x 156 x 185mm weight 2.1kg
Characteristics:
Power 50W
Frequency range 75Hz-20khz
MAX SPL 100dB
Inputs 1/4 "TRS balanced, RCA unbalanced, 1/8" AUX, 1/8 Headphone,
Connect speaker to speake,
Dimensions (HxWxD) 224 x 156 x 185mm
weight 2.1kg |
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
|
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 20 kHz | | Max SPL: | 114 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 70° | | | Compression Driver: | 1" neo, metal dome | | | Woofer: | 6.5" neo, ICC technology | |
| INPUT/OUTPUT SECTION |
|---|
| Input connectors: | combo XLR/Jack | | | Input sensitivity: | -6/+6 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1900 Hz | | | Protections: | thermal, excurs., rms | | | Limiter: | soft limiter | | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
| AMPLIFIER SPECIFICATIONS |
|---|
| High frequencies: | 100 Watts | | | Low frequencies: | 200 Watts | | | Cooling: | convection | | | Connections: | vde | |
| CABINET |
|---|
| Cabinet Material: | die cast aluminum | | | Hardware: | orientation adjustable stand | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 370/14.5 mm/inch | | | Width: | 265/10.4 mm/inch | | | Depth: | 250/9.8 mm/inch | | | Net Weight: | 10.5/23 Kg/Lbs |
|
MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 35 Hz | ÷ 20 kHz | | Max SPL: | 116 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 70° | | | Compression Driver: | 1" neo, metal dome | | | Woofer: | 8" neo, ICC technology | |
| INPUT/OUTPUT SECTION |
|---|
| Input connectors: | combo XLR/Jack | | | Input sensitivity: | -6/+6 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1800 Hz | | | Protections: | thermal, excurs., rms | | | Limiter: | soft limiter | | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
| AMPLIFIER SPECIFICATIONS |
|---|
| High frequencies: | 100 Watts | | | Low frequencies: | 200 Watts | | | Cooling: | convection | | | Connections: | vde | |
| CABINET |
|---|
| Cabinet Material: | die cast aluminum | | | Hardware: | orientation adjustable stand | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 430/17 mm/inch | | | Width: | 310/12.2 mm/inch | | | Depth: | 300/11.8 mm/inch | | | Net Weight: | 16.150/35.60 Kg/Lbs |
|
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
- Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
- Powered bass reflex speakers with 15 watts per side and flat frequency response
- Active subwoofer with 50-watt amplifier for increased low end
- Front-mounted controls convenient located on right speaker
- Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
- Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
|
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
|
Reviews
There are no reviews yet.