MACKIE THUMP 12A powered loudspeaker 12”1300W

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     12“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     100W Class D
Frequency Range     55Hz-20kHz (-10dB)
Crossover Frequency     1.5kHz
Maximum Peak SPL     124dB
Horizontal Coverage Angle     90 Degrees
Vertical Coverage Angle     50 Degrees
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly, Wedge
Inputs     1 x XLR
Outputs     1 x XLR
Height     24“
Width     15.2“
Depth     15“
Weight     50 lbs.

Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     12“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     500W Class D
Frequency Range     50Hz-20kHz (-10dB)
Crossover Frequency     2kHz
Maximum Peak SPL     131dB
Horizontal Coverage Angle     75 Degrees Axisymmetric
Vertical Coverage Angle     75 Degrees Axisymmetric
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Floor Wedge, Fly
Inputs     1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs     2 x XLR (Direct), 1 x XLR (Line)
Height     26“
Width     15“
Depth     15.4“
Weight     49 lbs.
Manufacturer Part Number     KW122

• EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
• QuickSmartDSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
• High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
• EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
• Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX three-handle design for easy lifting.

• 2000W power via ultra-efficient Class-D amplification
• TruSourceTM Technology
• Mackie designed, vertically-aligned, common-magnet TruSource driver
• 12″ LF woofer / 1.75″ HF compression driver
• Incredibly compact, lightweight design
• Powerful TruSource DSP delivers seamless clarity, consistent coverage and unmatched fidelity
• DL2 Integrated Digital Mixer
• Powerful, one-touch digital mixer with bright OLED screen
• Two highly-versatile input channels with FX
• Independent channel level, 3-band EQ and effects control
• 16 great-sounding channel effects include reverb, chorus and delay
• XLR/TRS combo and dual RCA connectors
• Handles mic, line, stereo and instrument signals
• Unmatched system control for professional applications
• Multi-band feedback destroyer
• Six speaker modes deliver the perfect voicing for your application
• Alignment delay up to 300ms for delay stack, balcony, etc.
• Three memory locations for instant venue setting recall
• Smart Protect DSP dynamically protects amp/driver
• Innovative ultra-compact design
• 1/3 smaller than a traditional 2-way
• Fit an entire DLM system in nearly any car
• Stack them up for storage
• Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
• Flyable via standard M10 rigging hardware
• Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
• Roadworthy PC-ABS cabinet with  pro black finish and ergonomic top carry handle
• Rugged, powder-coated 20 gauge steel grille
• Integrated kickstand delivers perfect angle for personal monitor use
• Ridiculously lightweight (31 lbs. / 14.1 kg)