| Content |
Input MADI: 1 x BNC, 1 x optical
Output MADI: 1 x BNC, 1 x optical
Input ADAT optical: 8 x TOSLINK, 24-Bit, Bitclock PLL
Output ADAT optical: 8 x TOSLINK, 24-Bit
Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp input signal), switchable termination
Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
MIDI input and output: via two 5-pin DIN jacks
Sync sources: MADI, ADAT optical, word clock, internal
Varipitch: by input signal or word clock
Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock)
Sample rate range: MADI: 32 kHz - 96 kHz, word clock: 27 kHz-105 kHz, ADAT: 33 kHz - 57 kHz
Jitter: Internal clock
Jitter suppression on external clock: circa 30 dB (2.4 kHz)
Jitter sensitivity: all PLLs operate even at 100 ns Jitter without problems
Power supply: internal switching mode ps, 100 V-240 V AC, 50-60 Hz, 10 Watts
Dimensions: 483 x 44 x 200 mm
|
Power and Options...
The Apogee X-Series FireWire Card gives you the power and convenience of a
direct connection to any FireWire equipped computer. The X-FireWire Card uses
an expansion slot in the ROSETTA 800 to give users of Logic, Nuendo and other
popular software the option of amazing sounding Apogee conversion. Using Apple?s
Core Audio FireWire driver for Macintosh and ASIO drivers for Windows, your
hardware options for your DAW are greatly expanded.
eXpandability...
The two ports on the Apogee X-FireWire Card allow you to daisy-chain additional
devices to create an entire system. By extending the bus, the X-FireWire card
allows for daisy-chaining of multiple Apogee systems or compatible peripherals,
and permits the use of multiple FireWire devices by computers with only one port.
The card also passes power through the FireWire ports to allow the powering of
additional devices. (Note: This feature is available for Windows systems only at this time).
Get Connected
With and X-FireWire card installed in an AD-16X, DA-16X, Rosetta 200 or Rosetta 800
you have the power of a professional FireWire connection to your favorite DAW: Logic 7,
Nuendo, Cubase, Cakewalk, Live or virtually any native audio production software.
Low Latency with FireMix
FireMix is a mixer application that allows control and creation of customizable sub-mixes
for low latency performance in the native environment. FireMix features accurate input and
output metering, 16bit fader control, and eight 48bit mix busses with enough DSP headroom
to insure that there are no compromises to the audio quality. FireMix also has customizable
pan control and key modifier user preferences to allow FireMix to operate in the same manner
as your favorite audio application. With FireMix, you will get low latency monitoring, have the
ability to save and recall all of your mixes, group and ungroup master faders all with little to no
impact on your CPU performance.
Features:
* 2, S400 FireWire connectors, allowing convenient chaining of multiple units
* Compatible with Apple's OS X built-in FireWire Core Audio driver
* Supplied with Windows XP WDM/ASIO driver
* Up to 8x8 24bit at 88.2/96k
* Up to 4x4 24-bit channels at 176.4/192KHz
* Fully compliant and compatible with 61883-6 and other relevant 1394 IEEE
and AES specifications
* Allows low-jitter synchronization to a FireWire audio network and can provide
a master clock source for a FireWire audio network
|
DB25 to 8 x XLR Female. This cable allows the Apogee AP-8AD Yamaha A/D card to accept eight channels
of analog input. Also suitable for use with the AD-16 (quantity 2 required for 16 channels). The wiring is the
same as the analog input connector on a Tascam machine such as the DA-88. Alternatives are available from
Tascam, Hosa and others. |
The DA-16X features a redesigned power supply, standard 192kHz sampling rates,
the C777 clocking technology found in Big Ben, and optional Pro Tools HD and
FireWire expansion cards. And, not only does the X-Series hardware offer unequaled,
groundbreaking technology but it makes it available at a fraction of the cost associated
with previous, premium Apogee gear.
Features:
16 channels of premium 24-bit DA conversion
Sample rates up to 192k
16 channels of AES, ADAT/SMUX Input
Word Clock I/O
Optional HD card for direct connection to ProTools HD
Optional S800 FireWire card capable of sample rates up to 192k, compatible
with OS X/Windows XP and all popular DAW's
All option cards (X-FireWire and X-HD) facilitate connection of multiple units
Direct Digital Synthesis (DDS) using Big Ben's C777 Clock Technology up to 192kHz
Master clock capability
Adaptive Loop Filtering (ALF) for optimum clock performance and minimum jitter
Support for AES double wire and SMUX formats
Intuitive front panel calibration
Word Clock termination switch
|
A/D converter card for ISA 428.
Technical Info:
THD+N: -110 dB (A-weighted) with -4dBfs input signal at .997kHz
Crystal oscillator accuracy: +/- 15 ppm
Clock Jitter 44.1kHz-192kHz: |
The Rosetta 200, Apogees successor to the PSX-100 and Rosetta AD namesake,
delivers the quality of the popular Rosetta 800, in a 2-channel AD/DA solution. Like
the Rosetta 800, the 200 features premium Apogee A/D and D/A conversion, 192k
sampling rates (standard), optional Pro Tools HD, Mix and FireWire expansion cards
and core Apogee technologies such as UV22HR, and SoftLimit. And while the
Rosetta 200 shares much of its feature set with its cousin, it throws in some irresistible
extras such as the new, CODA, Audio Finishing Module, full channel metering, and
MIDI and S/PDIF input and output. Flexibility and features galore make the Rosetta 200
an outstanding option for professional and project studios, mastering engineers, and
audio archivists.
Features:
Channels of premium 24-bit AD/DA conversion
Sample rates up to 192kHz with Apogee's "Intelliclock"
2 channels of AES, S/PDIF (coax & optical), and ADAT/SMUX I/O MIDI I/O
Optional FireWire expansion card for compatibility with OS X, and
Windows XP (X-FireWire card)
Optional expansion card for direct connection to Pro Tools HD & Mix systems
(X-HD card, X-Digi-Mix card)
“Soft Limit" for maximum digital level without overs
CODA: The Aptomizer Level Normalizer, Sample Rate Conversion (SRC), and
Apogees UV22HR for superior dither to 16-bit
Full channel metering
|
Reviews
There are no reviews yet.