Content |
The IC 610 is the smaller of two strong-sounding built-in loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound.
A 25 mm fabric dome tweeter – which may be adjusted horizontally and vertically – has been fitted into the front. Which means that the emitted sound may be perfected to suit even very different room conditions. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease.
Description
Value
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
25 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
75 / 140 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 – 8 Ohms
Frequency Response
35 – 32000 Hz
Crossover Frequencies
3500 Hz
Recommended Amplifier Output
30 - 140 watts
Mounting depth
85 mm
Outer Dimensions (WxH)
220 x 306 mm
Cutting Out (WxH)
188 x 275 mm
|
Dimensions | Metric :5-7/16" W x 4-1/4" D x 25-1/4" H | 13.8 x 10.8 x 64.1 cm
Height with Base | Metric :26-5/8” | 65.1 cm
Base Dimensions | Metric :8” W x 6” D | 20.3 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :45 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Accessories :Wall bracket; Glass Base
Packaging :One to a carton
Weight | Metric :15 lbs | 6.8 kg
Warranty :5 Years |
Outer Flange Dimensions | Metric :7-1/2” W x 10-13/16” H | 19.1 x 27.5 cm
Cut Out Dimensions | Metric :6-1/2” W x 9-13/16” H | 16.5 x 24.9 cm
Depth from Flange | Metric :3-5/16” | 8.4 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 6-1/2" cast-basket bass/midrange driver
Frequency Response :28 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
Weight | Metric :6 lbs | 2.7 kg
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Warranty :5 Years
A/V Receiver Crossover Setting :80 Hz
|
Driver Complement
Mid/Woofer 1 - 8" Diameter (20.32cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 1" Diameter (2.54cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 30Hz-20kHz
Lower -3dB Limit 50Hz
Upper -3dB Limit 20kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 90 dB
Dimensions
Size 14-5/16" H x 10-1/16" W
(36.35cm H x 25.56cm W)
Cut-out Size 12-3/4" H x 8-3/4" W
(32.38cm H x 22.23cm W)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3" (7.62cm)
Overall Depth 3-1/2" (8.89cm)
Shipping/Other
Shipped As each
Product Weight 3.70 lbs. (1.68kgs) each
Total Shipping Weight 6.00 lbs. (2.72kgs)
Speaker Warranty Lifetime Warranty
|
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black |
Dimensions | Metric :4-1/8" W x 4-1/4" D x 10-1/4" H | 10.5 x 10.8 x 26.0 cm
Driver Complement :One 1" pure aluminum dome tweeter ; Two 3-1/2" high definition bass/midrange drivers
Frequency Response :60 Hz - 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :120 Hz
Accessories :Wall bracket
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Warranty :5 Years
Available Finishes :Gloss Black
Mounting Options :On shelf; On wall with included flush mounting bracket; Equipped with a single 1/4 20 thread to accommodate ProMount 80 (available separately); Compatible with Mythos GemStand (available separately)
Packaging :Two to a carton
Weight | Metric :4.5 lbs | 2 kg each |
Reviews
There are no reviews yet.