Content |
2-way recessed ceiling speaker
The IC 62 is the smaller of two strong-sounding built-in ceiling loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound.
The two built-in coaxial tweeters make two circuit versions possible – sound directed over a wide area or at specific points. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease.
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
75 / 140 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 – 8 Ohms
Frequency Response
35 – 35000 Hz
Crossover Frequencies
3500 Hz
Recommended Amplifier Output
20 - 140 Watts
Outer Dimensions Ø
228 mm
Cutting Out Ø
195 mm
Mounting depth
80 mm
|
Built on the same platform as the Control 47C/T, the Control 47LP is a low-profile model intended for locations with limited above-ceiling clearance (only 5.6 inches deep). The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Features:
Shallow Backcan Version of 47C/T for locations with limited clearance
Same Sonic Signature as Control 47C/T Allows
Mixing & Matching of mode
Proprietary Conical RBI® Technology Provides
Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Elegant design fits any décor
Specifications:
Frequency Range: 68 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1W, 1m
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Coverage:120° conical, consistent broadband
Nominal Impedance: 8 ohms
Component: 6.5 inch (135 mm) woofer, 1" tweeter
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield,
cutout template Grille
Dimensions (Diameter x Depth): 305mm Diameter x 142mm Diameter Depth (12.0 in x 5.6 in)
|
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-3/8” | 11.11 cm
Driver Complement :One 1" pure aluminum dome tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :30 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :4.5 lbs | 2.0 kg
Warranty :5 Years |
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
The JBL Professional Control 227C is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227C incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 227C features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. An 8 ohm driver is utilized on the Control 227C and offers 150 Watts of continuous power handling capability.
The Control 227C is easy to install and features a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.
The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
To ensure long life and reliability, Control 227C passes JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.
Features
- Consistent 120° broadband pattern control forexceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
- Extraordinary clarity for speech and vocals withextended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille (sold separately)
Specifications
- Frequency Range (-10dB): 43Hz - 19kHz
- Frequency Response (-3dB): 75Hz - 17kHz
- Nominal Sensitivity: 90dB measured half-space; 95dBcomputed for competitive comparison
- Nominal Coverage Angle: 120 degrees conical,broadband
- Nominal Impedance: 8 ohms
- Low Frequency: 6.5" Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia.): 12" round baffle x depth fromback of baffle of 5.8“
|
Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Freq. Response: 30 Hz - 30 kHz,
Impedance: 8 Ohms Rec. Ampl. Power: 10 - 250 watts
Inputs: One pair of gold plated spring loaded posts, Finishes: Paintable White
Outer Dimensions: 29.2 x 29.2 x 14.9cm
Cut Out Dimensions: 26.4 x 26.4 x 14.9cm
Driver Complement |
---|
Tweeter | Quantity | 1 | Diameter | 1" (2.54cm) | Type | Pure Aluminum Dome | Mid / Woofer | Quantity | 2 | Diameter | 4 1/2" (11.43cm) | Type | High Definition Bass/Midrange Driver | Bass Radiator | Quantity | 2 | Diameter | 5 1/4" (13.34cm) | Type | Planar Bass Radiator |
Electrical |
---|
Audio Inputs | Speaker Level | 1 Pair (Heavy Duty Spring Loaded) | Maximum Sensitivity | 1 watt @ 1 Meter | 92 dB | Total Frequency Response | Overall | 30 Hz - 30 kHz | Nominal Impedance | Compatible with | 8 ohm | Crossover | A/V Receiver Crossover Setting | Small (60 Hz) | Power Handling | 10 - 250 watts per channel |
Installation |
---|
Cut Out Dimensions | Height | 10 3/8" (26.35cm) | Width | 10 3/8" (26.35cm) | Mounting Depth | 5 7/8" (14.92cm) | Grille Dimensions | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Outer Flange | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Placement | Orientation | In Ceiling | Cabinet Type | Speaker Enclosure | Sealed Medite |
|
Reviews
There are no reviews yet.