Content |
2-way recessed ceiling speaker
The ICP 82 is the largest of the four recessed ceiling speakers of the Interior Performance series. Equipped with a 19 mm tweeter than can be pivoted by 35° in all directions, the in-ceiling system can also be adapted to very custom installation scenarios. As a result, most installation situations can be handled successfully.
Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
19 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
80 / 140 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
8 Ohms
Frequency Response
34 – 24000 Hz
Crossover Frequencies
4.000 Hz
Recommended Amplifier Output
20 - 160 Watts
Outer Dimensions Ø
275 mm
Cutting Out Ø
240 mm
Mounting depth
102 mm
Weight
1.4 kg
|
The JBL Professional Control 227C is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227C incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 227C features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. An 8 ohm driver is utilized on the Control 227C and offers 150 Watts of continuous power handling capability.
The Control 227C is easy to install and features a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.
The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
To ensure long life and reliability, Control 227C passes JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.
Features
- Consistent 120° broadband pattern control forexceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
- Extraordinary clarity for speech and vocals withextended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille (sold separately)
Specifications
- Frequency Range (-10dB): 43Hz - 19kHz
- Frequency Response (-3dB): 75Hz - 17kHz
- Nominal Sensitivity: 90dB measured half-space; 95dBcomputed for competitive comparison
- Nominal Coverage Angle: 120 degrees conical,broadband
- Nominal Impedance: 8 ohms
- Low Frequency: 6.5" Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia.): 12" round baffle x depth fromback of baffle of 5.8“
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
* Frequency Response (-10 dB)1: 150 Hz - 20 kHz
* Frequency Range (±3 dB)1: 200 Hz - 17 kHz
* Power Capacity:
o 50 Watts Continuous Program Power (2 hrs)
o 25 Watts Continuous Pink Noise (2 hrs)
o 30 Watts Continuous Program Power (100 hrs)
o 15 Watts Continuous Pink Noise (100 hrs)
* Nominal Sensitivity:
o 87 dB (4.0 V, 1 W)
o 84 dB (2.83 V)
* Nominal Coverage Angle3: 140° (+25°/-50°)
* Directivity (Q): 4.7
* Directivity Index (DI): 6.2 dB
* Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
* Rated Impedance: 16 ohms (no transformer taps)
* Recommended High-Pass Frequency: 150 Hz
Transducer
* Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
Enclosure
* Enclosure Material: High impact polystyrene
* Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
* Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
* Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
* Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
* Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
* Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
* Net Weight (ea): 0.7 kg (1.5 lbs)
* Shipping Weight (pair): 2.0 kg (4.3 lbs)
* Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 9-5/16“(23.65cm)
Cut-out Diameter 8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3-3/8" (8.57cm)
Overall Depth 3-7/8" (9.84cm)
Shipping/Other
Shipped As each
Product Weight 3.25 lbs. (1.47kgs) each
Total Shipping Weight 5.00 lbs. (2.27kgs)
|
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-1/4” | 10.8 cm
Driver Complement :One 1" pure aluminum dome pivoting tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :28 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years |
Reviews
There are no reviews yet.