MAGNAT INTERIOR ICP 262 WHITE 2×2-way recessed ceiling speaker (PAIR)

196.59 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
2×2-way recessed ceiling speaker As a recessed ceiling speaker, the ICP 262 has a special place in the Interior Performance series. It has two 19 mm tweeters arranged at a fixed angle and 3-way treble level adjustment. Due to the dual voice coil, the ICP 262 can run in both mono and stereo mode. As […]

 

Read more

2×2-way recessed ceiling speaker

As a recessed ceiling speaker, the ICP 262 has a special place in the Interior Performance series. It has two 19 mm tweeters arranged at a fixed angle and 3-way treble level adjustment. Due to the dual voice coil, the ICP 262 can run in both mono and stereo mode. As a result, most installation situations can be handled successfully.

Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy.

 
Principle
2 x 2 way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
70 / 120 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
2 x 8 Ohm
Frequency Response
36 – 24000 Hz
Crossover Frequencies
4.000 Hz
Recommended Amplifier Output
20 – 140 Watts
Outer Dimensions Ø
233 mm
Cutting Out Ø
198 mm
Mounting depth
88 mm
Weight
1.3 kg

Weight 1.30 kg

Reviews

There are no reviews yet.

Be the first to review “MAGNAT INTERIOR ICP 262 WHITE 2×2-way recessed ceiling speaker (PAIR)”

Your email address will not be published. Required fields are marked *

Quick Comparison

MAGNAT INTERIOR ICP 262 WHITE 2x2-way recessed ceiling speaker (PAIR) removeJBL CONTROL 321C 12" Coax Speaker, 250 Watts, 34Hz-18kHz removePOLK AUDIO SC6S 20-100 W/ch In-Ceiling speaker removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V removeDEFINITIVE TECHNOLOGY UIW 64/A IN-CEILING LOUDSPEAKER 10-200W 8Ω -MATTE WHITE- (PAIR) removeJBL 8128 Ceiling Speaker 8 Inch 6 Watts remove
NameMAGNAT INTERIOR ICP 262 WHITE 2x2-way recessed ceiling speaker (PAIR) removeJBL CONTROL 321C 12" Coax Speaker, 250 Watts, 34Hz-18kHz removePOLK AUDIO SC6S 20-100 W/ch In-Ceiling speaker removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V removeDEFINITIVE TECHNOLOGY UIW 64/A IN-CEILING LOUDSPEAKER 10-200W 8Ω -MATTE WHITE- (PAIR) removeJBL 8128 Ceiling Speaker 8 Inch 6 Watts remove
Image
SKUICP 262CONTROL 321CSC6SCSS 8018UIW 64/A8128
Rating
Price 196.59 incl. GR VAT 571.00 incl. GR VAT178.99 incl. GR VAT 46.61 incl. GR VAT291.35 incl. GR VAT 65.65 incl. GR VAT
Stock

In stock

Available on backorder

In stock

In stock

In stock

In stock

AvailabilityIn stockAvailable on backorderIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

2x2-way recessed ceiling speaker

As a recessed ceiling speaker, the ICP 262 has a special place in the Interior Performance series. It has two 19 mm tweeters arranged at a fixed angle and 3-way treble level adjustment. Due to the dual voice coil, the ICP 262 can run in both mono and stereo mode. As a result, most installation situations can be handled successfully.

Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy.

 
Principle
2 x 2 way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
70 / 120 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
2 x 8 Ohm
Frequency Response
36 – 24000 Hz
Crossover Frequencies
4.000 Hz
Recommended Amplifier Output
20 - 140 Watts
Outer Dimensions Ø
233 mm
Cutting Out Ø
198 mm
Mounting depth
88 mm
Weight
1.3 kg

  • Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
  • Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
  • Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
  • Directivity Factor (Q) : 8.7 (1k - 16kHz)
  • Directivity Index (DI) : 9.4 dB (1k - 16kHz)
  • Long-Term System : 250 W (1000 W peak), 2 hrs
  • Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
  • Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
  • Maximum SPL6 : 118 dB cont ave (124 dB peak)
  • Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
  • Nominal Impedance : 8 ohms
  • Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
  • Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
  • Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
  • Net Weight : 16.0 lbs. (7.3 kg)
  • Shipping Weight : 19.4 lbs. (8.8 kg)

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter     2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response     40Hz-20kHz
Lower -3dB Limit     55Hz
Upper -3dB Limit     20kHZ
Nominal Impedance     8 ohms
Recommended Amplifier Power     20 - 100 w/channel
Efficiency     89 dB
Dimensions
Overall Diameter     8-15/16“(22.70cm)
Cut-out Diameter     7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     2-5/8" (6.67cm)
Overall Depth     3-1/8" (7.94cm)
Shipping/Other      
Shipped As     each
Product Weight     2.55 lbs. (1.16kgs) each
Total Shipping Weight     3.00 lbs. (1.36kgs)
Speaker Warranty     Lifetime Warranty

* Driver Size (dual-cone) 200 mm (8 in) * Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB * Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz o Installed in CSS-BB backcan: 90 Hz - 17 kHz * Coverage (2 kHz) 110° * Driver Continuous Power Handling 20 Watts * 100V Taps 10W, 5W, 2.5W * 70V Taps 10W, 5W, 2.5W, 1.3W * 25V Taps 10W, 5W, 2.5W, 1.3W * Transformer Insertion Loss 1.5 dB Maximum * Transformer Connection Bare wire * Motor Mass 283 g (10 oz) * Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849. * Matching CSS Backcan CSS-BB8 (0.15 cu ft) * Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter * Cutout Diameter o Open-back: 216 mm (8.5 in) o In CSS-BB backcan 295 mm (11.7 in) * Depth (behind grille) 73 mm (2.9 in) * Grille Diameter 327 mm (12.9 in) * Net Weight (ea) 1.58 kg (3.5 lb) * Shipping Weight (ea) 2.25 kg (5.0 lb) * Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan.
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-1/4” | 10.8 cm
Driver Complement :One 1" pure aluminum dome pivoting tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :28 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years


Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.

Specifications (8128):
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums

Weight1.30 kg8.80 kg1.36 kg1.58 kg2.70 kg1.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.30 kg
Weight 8.80 kg
Weight 1.36 kg
Weight 1.58 kg
Weight 2.70 kg
Weight 1.40 kg