Content |
2-way recessed ceiling speaker
The ICP 82 is the largest of the four recessed ceiling speakers of the Interior Performance series. Equipped with a 19 mm tweeter than can be pivoted by 35° in all directions, the in-ceiling system can also be adapted to very custom installation scenarios. As a result, most installation situations can be handled successfully.
Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
19 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
80 / 140 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
8 Ohms
Frequency Response
34 – 24000 Hz
Crossover Frequencies
4.000 Hz
Recommended Amplifier Output
20 - 160 Watts
Outer Dimensions Ø
275 mm
Cutting Out Ø
240 mm
Mounting depth
102 mm
Weight
1.4 kg
|
Built on the same platform as the Control 47C/T, the Control 47LP is a low-profile model intended for locations with limited above-ceiling clearance (only 5.6 inches deep). The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Features:
Shallow Backcan Version of 47C/T for locations with limited clearance
Same Sonic Signature as Control 47C/T Allows
Mixing & Matching of mode
Proprietary Conical RBI® Technology Provides
Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Elegant design fits any décor
Specifications:
Frequency Range: 68 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1W, 1m
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Coverage:120° conical, consistent broadband
Nominal Impedance: 8 ohms
Component: 6.5 inch (135 mm) woofer, 1" tweeter
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield,
cutout template Grille
Dimensions (Diameter x Depth): 305mm Diameter x 142mm Diameter Depth (12.0 in x 5.6 in)
|
In-Ceiling Audiophile Magic RC60i's round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout. RC60i Features: - Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.
- RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
- Lightweight and stiff blue polymer cones deliver excellent damping and bass response.
- Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.
- Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).
- Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).
- RCi speakers have paintable grilles and practically disappear into any room.
- RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
Dimensions - Cut-Out Diameter | 7 5/8 (19.37cm) " | Dimensions - Mounting Depth (includes 1/2 drywall)“ | 2 3/8 (6.03cm) " | Dimensions - Overall Depth | 2 7/8 (7.30cm) " | Dimensions - Overall Diameter | 9 (22.86cm) " | Dimensions - Pre-Construction Bracket | PB 60 | Driver Complement Mid / Woofer - Diameter | 6 1/2 (16.51cm) " | Driver Complement Mid / Woofer - Quantity | 1 | Driver Complement Mid / Woofer - Type | Dynamic Balance driver with mineral-filled polymer cone and rubber surround | Driver Complement Tweeter - Diameter | 3/4 (1.91cm) " | Driver Complement Tweeter - Quantity | 1 | Driver Complement Tweeter - Type | Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount | Electrical - Efficiency | 89 dB | Electrical - Inputs | Spring-loaded clips | Electrical - Lower -3dB Limit | 60 Hz | Electrical - Nominal Impedance | 8 ohms | Electrical - Recommended Amplifier Power | 20 - 100 watts per channel | Electrical - Total Frequency Response | 40Hz - 20kHz | Electrical - Upper -3dB Limit | 20 kHz | Shipping - Total Shipping Weight | 6 pounds | Shipping - Unit of Measure | pair | Warranty - Speaker Warranty | Lifetime |
|
* Frequency Response (-10 dB)1: 150 Hz - 20 kHz
* Frequency Range (±3 dB)1: 200 Hz - 17 kHz
* Power Capacity:
o 50 Watts Continuous Program Power (2 hrs)
o 25 Watts Continuous Pink Noise (2 hrs)
o 30 Watts Continuous Program Power (100 hrs)
o 15 Watts Continuous Pink Noise (100 hrs)
* Nominal Sensitivity:
o 87 dB (4.0 V, 1 W)
o 84 dB (2.83 V)
* Nominal Coverage Angle3: 140° (+25°/-50°)
* Directivity (Q): 4.7
* Directivity Index (DI): 6.2 dB
* Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
* Rated Impedance: 16 ohms (no transformer taps)
* Recommended High-Pass Frequency: 150 Hz
Transducer
* Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
Enclosure
* Enclosure Material: High impact polystyrene
* Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
* Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
* Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
* Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
* Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
* Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
* Net Weight (ea): 0.7 kg (1.5 lbs)
* Shipping Weight (pair): 2.0 kg (4.3 lbs)
* Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
| Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums | JBL's Commercial Series Ceiling Speakers provide excellent performance for paging and background music applications. High sensitivity across the product line provides maximum sound level, even at low tap settings
Features :
* High 90 dB sensitivity
* 5 Watt multi-tap transformer for 100V, 70V and 25V distributed lines
* Very wide 175° coverage
* Fits CSS-BB4 backcan |
Reviews
There are no reviews yet.