| Content | The body of the largest floorstanding speaker in the series has been manufactured from solid MDF panels and is extremely resistant to any kind of intrinsic resonance. As is the case for all other models, the baffle of the Monitor Supreme 2002 has been visually offset from the rest of the housing and is a feature that defines the design of this Magnat speaker.
The speaker, which is available in two high quality wood finishes, is equipped with two 200 mm bass drivers and one 170 mm midrange driver, which offer a particularly high level of dynamics in the bass segment and good precision over the entire frequency range. The coated 25 mm fabric dome with its newly developed tweeter flange also ensures significantly enhanced dispersion properties.
Description
Value
Principle
3 way bass reflex
Equipment
2 x 8” woofer
170 mm midrange
25 mm tweeter
Power Handling (RMS / Max.)
225 / 450 Watts
Sensitivity (2.8V/1m)
93 dB
Impedance
4 – 8 Ohms
Frequency Response
18 - 40000 Hz
Crossover Frequencies
350 Hz, 3.500 Hz
Recommended Amplifier Output
30 - 450 Watts
Dimensions (WxHxD)
267 x 1080 x 335 mm
Weight
23 kg
Cabinet surface
Ash decor black |
Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak
|
Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey
|
System Format: 3 Way
Frequency Response: 32Hz - 35kHz
Sensitivity (1W@1M): 90dB
Nominal Impedance: 4 Ohms
Maximum SPL (dBA): 116.2
Power Handling (RMS): 175W
Recommended Amplifier Requirements (RMS): 50 - 175W
Bass Alignment: Bass reflex.
Twin HiVe®II port System
Tweeter Crossover Frequency: LF/MF: 300Hz
MF/HF: 2.2 kHz
Drive Unit Complement: 2 x 6" RST® Bass drivers.
1 x 6" RST® Bass/Mid driver.
1 x 1" (25mm) C-CAM® gold dome tweeter
Product External Dimensions:
(H x W x D)
inc. plinth & feet 960 x 275 x 388 mm
(37 13/16 x 10 13/16 x 15 1/4 inch)
Individual Weight: 21.76 Kg (47.88 lb)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
If itʼs hard to put the sound of the CM9 into words, thatʼs just as well. This top-of-the-range floorstanding speaker will fill even the largest domestic spaces with music so richly detailed, and so startlingly lifelike, that it will leave you speechless.
The three-way CM9 delivers truly commanding bass with the aid of twin 165mm paper/Kevlar® cone drive units. An FST® driver, with its characteristic compression surround supporting the outer edge of the distinctive Kevlar® cone, is specially developed for outstanding midrange performance. The CM9ʼs Nautilus™ tube-loaded aluminium dome tweeter keeps high frequencies crisp and sharp all the way up to 50kHz and beyond.
The quality of CM Series drive units has made it possible to use minimalist crossovers throughout the whole range. The resulting gentle transition between drivers avoids the unnaturally rapid changes in dispersion that bedevil more complex designs, while the high quality components, carefully chosen after exhaustive listening tests, ensure that as little as possible gets between you and the sound of the original recording.
All CM Series speakers come with aluminium driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, or a highly polished gloss black.
Technical features
Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone FST midrange
Flowport™
Description 3-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar® cone FST midrange
2x ø165mm (6.5 in) paper/Kevlar® cone bass
Frequency range -6dB at 30Hz and 50kHz
Frequency response 56Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 89dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
|
Dimensions | Metric : 4" D x 4-1/16" W x 19-9/16" H | 10.1 x 10.3 x 49.7 cm
Base Dimensions | Metric :5-1/2" D x 6-1/2" W | 14 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition bass/midrange drivers; Two 3-1/2" pressure coupled bass radiators
A/V Receiver Crossover Setting :120 Hz
Frequency Response :60 Hz – 30 kHz
Inputs :One pair of 5 way binding posts
Impedance :Compatible with 8 Ohms outputs
Enclosure :Aircraft grade extruded aluminum
Sensitivity :89 dB
Available Finishes :Gloss Black
Recommended Associated Amplifier Power :10 – 175 watts
Accessories :Wall bracket; Glass Base
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Packaging :One to a carton
Weight | Metric :8 lbs | 3.6 kg
Warranty :5 Years |
Reviews
There are no reviews yet.