Content | Shelf speaker, 2-way
The Monitor Supreme 102 is a very compact shelf speaker, which is equipped with a 110 mm bass-midrange driver and a newly developed tweeter. Both precision drivers are adequately accommodated in a low-resonance MDF cabinet with visually offset baffle.
The speaker, which is available in two wood finishes, is equipped with a specially coated paper cone and offers an astonishing level of dynamics and good precision. The 13 mm Mylar dome is perfectly embedded in the new tweeter flange and reproduces the entire frequency range above 3400 Hz with exceptional accuracy.
Description
Value
Principle
2 way
Equipment
13 mm dome-tweeter
110 mm woofer-midrange
Power Handling (RMS / Max.)
60 / 120 Watts
Sensitivity (2.8V/1m)
89 dB
Impedance
4 – 8 Ohms
Frequency Response
42 - 36000 Hz
Recommended Amplifier Output
20 - 110 Watts
Dimensions (WxHxD)
149 x 250 x 190 mm
Weight
2.8 kg
Cabinet surface
Ash decor black
Mocca decor |
Dimensions | Metric :4-3/4" W x 5" D x 8-3/8" H | 12.1 x 12.7 x 23.8 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 4-1/2" BDSS bass/midrange drivers; One 4-1/2" pressure coupled bass radiator
Frequency Response :57 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 150 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Included Accessories :Tripod Base; Two ¼ 20 insert cover plugs
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket mount(available separately); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 600/800 stand mounting (ProStand 600/800 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :4 lbs | 1.8 kg
Warranty :5 Years
|
The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.
The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.
The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.
The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.
Technical features | Metal dome Nautilus™ tweeter |
---|
| Woven glass fibre cone bass / midrange | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) metal dome high-frequency |
| 1x ø100mm (4 in) woven glass fibre cone bass / midrange | Frequency range | -6dB at 72Hz and 50kHz | Frequency response | 80Hz - 23kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response | Horizontal: | over 60º arc | Vertical: | over 10º arc | Sensitivity | 85dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m) |
| | |
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black |
The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.
The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.
The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.
The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.
Technical features | Metal dome Nautilus™ tweeter |
---|
| Woven glass fibre cone bass / midrange | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) metal dome high-frequency |
| 1x ø100mm (4 in) woven glass fibre cone bass / midrange | Frequency range | -6dB at 72Hz and 50kHz | Frequency response | 80Hz - 23kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response | Horizontal: | over 60º arc | Vertical: | over 10º arc | Sensitivity | 85dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m) |
| | |
Woven Kevlar
Crossover Tuning
Nautilus Tapering Tube
Flowport
Technical features Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone bass/midrange
Flowport™
Description 2-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø165mm (6.5 in) woven Kevlar® cone bass/midrange
Frequency range -6dB at 45Hz and 50kHz
Frequency response 52Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 88dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
|
Reviews
There are no reviews yet.