| Content |
The Quantum 675 is the smaller of two floor-standing loudspeakers in the Quantum 670 series, a further development of Magnat´s Quantum 650 series, which was highly praised in many test reviews. The elegantly rounded MDF case with its elaborate struts and varnished 25 mm acoustic baffle constitute the strong foundation for high-strength aluminium-ceramic cones and the lightweight dome made of synthetic silk with redesigned horn flare.
The Quantum 675 is available with a black and mocha-coloured corpus, the baffle on both versions possesses a black piano-lacquer finish. One bass and one bass/mid-range loudspeaker with a diameter of 170 mm in conjunction with Magnat´s proven ceramic-aluminium sandwich cone in streamlined baskets made from carbon-fibre-reinforced ABS are responsible for highly precise sound and harmonious transitions to the dynamic second-generation "HRH" silk dom
Description
Value
Principle
2 ½ way bass reflex
Equipment
30 mm tweeter
170 mm midrange
1 x 170 mm woofer
Power Handling (RMS / Max.)
180 / 300 Watts
Sensitivity (2.8V/1m)
92 dB
Impedance
4 – 8 Ohms
Frequency Response
22 – 50000 Hz
Crossover Frequencies
250 Hz, 3100 Hz
Recommended Amplifier Output
> 30 Watts
Dimensions (WxHxD)
202 x 995 x 316 mm
Weight
17 kg
Cabinet surface
Piano black/ Ash decor black
Piano black/ Ash decor mocca
|
Dimensions | Metric :7" W x 11" D x 35" H | 17.8 x 27.9 x 88.9 cm
Driver Complement :Two 1” pure aluminum dome tweeters; Two 5.25” high definition bass/midrange drivers
Frequency Response :25 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 175 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of five way binding posts
Accessories :Feet; Isolation Spikes
Weight | Metric :42 lbs | 19.1 kg
Available Finishes :Piano-Gloss Black
Packaging :One to a carton
Warranty :5 Years |
Dimensions | Metric :6" W x 6" D x 48-1/2" H (with base) | 15.2 x 15.2 x 123.2 cm
Packaging :One to a carton
Height with Base | Metric :48-1/2" | 123.2 cm
Base Dimensions | Metric :10" W x 9-3/4" D | 25.4 x 24.8
Driver Complement :One 1" pure aluminum dome tweeter; Two 5-1/4" high definition midrange drivers; Two 5-1/4" high definition bass drivers; Two 5-1/4" pressure coupled bass radiators
Enclosure :Aircraft grade extruded aluminum
Frequency Response :20 Hz – 30 kHz
Recommended Associated Amplifier Power :20 – 250 watts
Available Finishes :Gloss Black
Weight | Metric :37 lbs | 16.8 kg
Impedance :Compatible with 8 Ohms outputs
Inputs :One pair of 5 way binding posts
Warranty :5 Years
A/V Receiver Crossover Setting :60 Hz
Accessories :Plastic Foot Tippers; Isolation Spikes
Sensitivity :92 dB
Base :Tempered Glass
|
Recommended Usage Front Speakers
Type 3-Way Bass Reflex Design
Woofers Dual 8" PMD Cone
MidRange Driver 5" Cone With Waveguide Horn
Tweeters 1" Aluminum Dome With Waveguide Horn
Magnetic Shielding Yes
Twin Bass Reflex Ports Single Port
Gold-Plated Brass Extruded Terminals Bi-Wiring Terminals
Frequency Response 30 Hz - 35 kHz
Sensitivity 89 dB/2.83 V/1 m
Input Power (Maximum / Nominal) 250W / 100W
Impedance 6 Ohms
Product Dimensions (W x H x D) 10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each) 53.7
|
If itʼs hard to put the sound of the CM9 into words, thatʼs just as well. This top-of-the-range floorstanding speaker will fill even the largest domestic spaces with music so richly detailed, and so startlingly lifelike, that it will leave you speechless.
The three-way CM9 delivers truly commanding bass with the aid of twin 165mm paper/Kevlar® cone drive units. An FST® driver, with its characteristic compression surround supporting the outer edge of the distinctive Kevlar® cone, is specially developed for outstanding midrange performance. The CM9ʼs Nautilus™ tube-loaded aluminium dome tweeter keeps high frequencies crisp and sharp all the way up to 50kHz and beyond.
The quality of CM Series drive units has made it possible to use minimalist crossovers throughout the whole range. The resulting gentle transition between drivers avoids the unnaturally rapid changes in dispersion that bedevil more complex designs, while the high quality components, carefully chosen after exhaustive listening tests, ensure that as little as possible gets between you and the sound of the original recording.
All CM Series speakers come with aluminium driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, or a highly polished gloss black.
Technical features
Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone FST midrange
Flowport™
Description 3-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar® cone FST midrange
2x ø165mm (6.5 in) paper/Kevlar® cone bass
Frequency range -6dB at 30Hz and 50kHz
Frequency response 56Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 89dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
| System Format: 3 Way
Frequency Response: 30 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 116.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 790 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment: 2 x 6.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
1060 x 210 x 330 mm
(41 3/4 x 8 1/4 x 13 inch)
Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) |
Reviews
There are no reviews yet.