| Content | The new CD6006 is a fine-tuned version with even more specially selected components and new layout circuit compared to its CD6005 predecessor. We also added more rigid feet to further eliminate vibration. The oversized power supply feeds the digital and analog circuitry of the player, where the high-quality CS4398 DAC converts digital signals to analog, this is then 'pushed' to the gold-plated synch outputs by Marantz's own small signal amplifier, the HDAM-SA2. In addition, we have included a new remote that also controls the PM6006 amp.
The CD6006 is a match made in heaven for the music lover who wants nothing but the best performance at an attractive price, and it is also perfect for lovers of portable music, thanks to its iPod-digital connectivity. The CD6006 also features a newly developed, complex headphone amplifier with Headphone amp gain setting for a wider range of headphones.
| Standby Consumption |
0.3 W |
| Maximum Dimensions (W x D x H) |
17.3 x 13.5 x 4.1 inches |
|
High rigidity metal frame
• High quality mains filter
• Rubber insulated aluminium feet
• Philips L1210 CD module
• True balanced analogue output
• Toroidal transformers with separated sections
• fordigital and analogue supply
• Double mono balanced analogue stage Analog
Devices AD1895 digital upsampler Texas 2 x
PCM 1796 DB DACHigh quality analogue
stage design
Very low jitter system clock management
|
Introducing the Denon DN-C640, a fully specified Network Audio/CD player for use in all broadcast, installation and professional audio environments. The DN-C640 is a 1U rack-mount unit featuring a slot-load CD/DVD drive, able to read CDA, MP3, WMA, MP2 and PCM .wav files from CD or DVD media. It is also equipped with an inbuilt LAN port offering complete access to network audio files and remote control via a web based GUI.
With balanced, unbalanced, SP-DIF and AES outputs, an RS 232 port, an IR receiver and a parallel remote port, the DN-C640 fits into any and all pro audio environments requiring the playing of CD and the versatility of network audio selection, locally or remotely. Additionally the use of DVD media and compressed audio files can result in days of playback accommodating the most demanding of users.
The product is completed with a high visibility, fully featured fluorescent display and large backlit transport controls.
- Supports CD-DA (.cda), WAVE (.wav), MPEG-1/2 Layer III (.mp3), MPEG-1
- Layer II (.mpg), Windows Media Audio (.wma)
- End Monitor and User-selectable Finish Mode Features
- Cue to Music (with dedicated button)
- Reads CD-R/RW, DVD-R/RW, and DVD+R/RW discs
|
• Metal remote control High rigidity metal
frame
• High quality mains filter
• Three separated power supply for
mechanism, digtal and analogue sections
• Rubber insulated aluminium feet
• Philips SD6.3 SACD module
• True balanced analogue output
• Double mono balanced analogue stage
• Analog Devices AD1896 digital
upsampler
• Texas 2 x PCM 1792 DB DAC
• High grade IC LME49710 analogue stage
design
Very low jitter system clock management
Magnetically couplet digital I²S bus
Channel Separation Better than 110dB
CD formats supported SACD Stereo, CD, CD-R
Digital to Analog Conversion Dual differential 24-bit DACs
Dynamic Range > 100 dB (PCM)
> 130 dB (DSD)
Frequency Response 0 Hz - 20 kHz (PCM)
0 Hz - 39 kHz (DSD)
Maximum Output (0dBFS) 3.66V balanced
1.83V single-ended
Output Complement 1 pair XLR balanced audio outputs
1 pair RCA single-ended audio outputs
Output Impedence 110 ohm
Power supply 100 V, 120V, 230 V, 240 V (50-60 Hz) factory set for destination country
Power Consumption 35 watts maximum
Dimensions 17 x 15.5 x 3.35 in
43,5 x 35 x 8,5 cm
Weight (with envelop) 26lbs / 12 Kg
|
- D/A convertersTwin Analog Devices AD1955 24-bit DACs
- Digital filter2nd Generation ATF2 up-sampling to 24-bit/384kHz. Linear Phase, Minimum phase or Steep modes.
- Analogue filter2-pole differential Bessel with DC servo (for both XLR and RCA outputs)
- Digital audio inputs1 x AES/EBU, 2 x S/PDIF coaxial and 2 x TOSLINK optical
- USB Audio inputUSB Type B conforms to USB Audio profile 1.0 or 2.0 (user selectable)
- Analogue audio outputsBalanced XLR and unbalanced RCA analogue audio outputs
- CompatibilityUPnP: Linear PCM 16-24 bit, 11.025-192kHz
Local USB media:Linear PCM 16-24 bit, 11.025-192kHz
USB Audio1.0: Linear PCM 16-24 bit, 44.1-96kHz
USB Audio 2.0: Linear PCM 16-24 bit, 44.1-192kHz or DSD (x64)
- TOSLINK: 16-24 bit, 32-192kHz (using high quality TOSLINK optical cable)
S/PDIF: Linear PCM 16-24 bit, 32-192kHz
AES3/EBU: Linear PCM 16-24 bit, 32-192kHz
BT100 Bluetooth receiver: A2DP plus aptX
Internet radio: 16-24 bit, 11.025-192kHz
- Audio formatsALAC, WAV, FLAC, AIFF, WMA, MP3, AAC, HE AAC, AAC+, OGG Vorbis
- Standby power consumption
|
Tube Cd player
2x12AX7 outpup.
192Khz/24Bit
120dB dynamic
|
Frequenzbereich:
|
20Hz - 20kHz +/- 0,5dB
| |
Fremdspannungsabstand:
|
90 dB
| |
Kanaltrennung:
|
90 dB
| |
Dynamikbereich:
|
120dB
| |
Röhrenbestückung:
|
2 x 12AX7
| |
Up-Sampling:
|
192kHz/24-bit
| |
Standardzubehör:
|
Fernbedienung
| |
Ausgangsspannung
|
2 V (± 3 dB)
| |
Digitale Ausgänge:
|
Nach IEC958 Standard
| |
Leistungsaufnahme:
|
25 Watt
| |
Besonderheiten:
|
Digitaleingang
| |
Frontblende:
|
Silber, schwarz
| |
Maße (B x H x T):
|
440 x 100 x 330 mm
| |
Gewicht:
|
8,4 kg
|
|
Reviews
There are no reviews yet.