| Content |
Slim 7.2Ch 4k Ultra HD AV Receiver with HEOS Built-in
Hear the most musical sound from an elegantly slim profile. The Marantz NR1710 7.2ch 4k Ultra HD AV receiver drives immersive, high-fidelity audio from a compact chassis. At half the height of a traditional AV receiver, the NR1710 supports multi-dimensional audio formats Dolby Atmos, Dolby Atmos Height Virtualization Technology, DTS:X and DTS Virtual:X. Enjoy your extensive music collection with support for Hi-Res formats, a front-panel USB and phono equalizer to connect your turntable. Stream music from leading music services and control the NR1710 with voice control compatibility via Amazon Alexa, Google Assistant and Apple Siri. Eight HDMI inputs — including one on the front panel — support the latest video and picture formatting and eARC transmission of enhanced audio.
Key Features
- Slim profile that’s half the height of a traditional AV receiver delivers exceptional performance and sound quality
- 7-channel discrete power amplifier, 50W per channel (8-ohm, 20Hz – 20kHz, 0.08% THD, 2ch. drive)
- 8-HDMI inputs — including one on the front panel — with full HDCP 2.3 support
- Supports Dolby Vision, Hybrid Log-Gamma (HLG), eARC and ALLM for enhanced picture and audio
- 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR10 and BT.2020
- Immersive surround sound with Dolby Atmos, Dolby Atmos Height Virtualization Technology, DTS:X and DTS Virtual:X
- ALAC, FLAC and WAV lossless file decoding up to 24-bit/192-kHz for high-resolution listening
- HEOS Built-in for multi-room streaming
- Built-in Wi-Fi with 2.4GHz/5GHz dual band support (dual antenna)
- Supports all major voice control agents and streaming services for seamless control
- Integrated phono input to directly connect your turntable
| Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) |
50 W |
| Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) |
70 W |
| Power Output (6 ohm, 1 kHz, 10% 1ch Drive) |
100 W |
| Specs
| Audio Specifications and Features |
| Stereo Power |
75 W |
| Input Sensitivity/Impedance |
27 |
| Surround Processing Features |
| Dolby Digital |
55 dB |
| Dolby Pro Logic II with Movie, Music and Game Mode |
40 dB |
| Video Features |
| Television Format |
PAL |
| Input Level/Impedance |
1 Vp-p/75 |
| Video Frequency Response (Component Video) |
10 Hz – 8 MHz (–3 dB) |
| HDMI Input / Output |
4K x 2K |
| HDMI Version |
1.4 a with 3D support |
| FM Tuner Features |
| Frequency Range |
87.5 MHz – 108.0 MHz MHz |
| Signal-to-Noise Ratio (Mono/Stereo) |
70 dB/68 dB |
| Distortion (Mono/Stereo) |
0.2%/0.3% |
| Stereo Separation @ 1kHz |
40 dB |
| Selectivity ±400kHz |
70 dB |
| Image Rejection |
80 |
| IF Rejection |
80 |
| AM Tuner Specifications |
| Frequency Range kHz |
522 kHz – 1,620 kHz kHz |
| Signal-to-Noise Ratio |
38 dB |
| Usable Sensitivity (Loop) |
375 µV |
| Distortion |
(1 kHz, 50% mod): 1.0% |
| Selectivity |
(±10 kHz): 30 dB |
| General Specifications |
| Power Requirement |
220V - 240V AC, 50Hz/60Hz |
| Power Consumption (full power/idle) |
0.5 W (standby); 410 W maximum |
| Dimensions (H x W x D – Metric/English) |
121 mm x 440 mm x 300 mm |
| Weight (Metric/English) |
4.6 kg (10 lb) |
|
High-end 7.2-channel AVENTAGE model features most advanced Surround:AI capability and latest network functions. Product available from September
- 7-channel powerful surround sound
- --- 110 W per channel (8 ohms, 20 Hz-20 kHz, 0.06% THD, 2-ch driven)
- --- 165 W per channel (8 ohms, 1 kHz, 10% THD, 1-ch driven)
- --- 170 W per channel (4 ohms, 1 kHz, 0.9% THD, 1-ch driven)
- Surround:AI automatically optimises the surround effect in real time
- Dolby Atmos® and DTS:X™ with CINEMA DSP HD3
- YPAO™-R.S.C. with multi-point measurement and precision EQ
- Ability to add wireless surround speaker/s* (*MusicCast 20 or MusicCast 50)
- Amazon Alexa voice control compatibility* (*Availability varies by region)
- Highly rigid construction including Anti Resonance Technology (A.R.T.) Wedge?
- High quality parts for optimum performance
- Professional quality digital audio by ESS DAC
- MusicCast multi-room technology
- Music streaming services built-in
- HDMI® (7 in / 3 out) with Dolby Vision™ and Hybrid Log-Gamma
- Phono input for vinyl playback
|
Enjoy immersive multi-channel sound with the Denon AVR-X2600H 7.2-Channel Network A/V Receiver. It delivers up to 95W of power at 8 Ohms and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay 2 support allows the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets. Onboard Wi-Fi and Ethernet connectivity enables the AVR-X2600H to access a variety of internet-based music sources. The receiver can be controlled via, and integrated into, your Google Assistant, Amazon Alexa, or Apple Siri ecosystem.
With eight HDMI inputs and two HDMI outputs, this receiver can act as a video switcher for your HD source components. It will pass through 4K signals along with HDR10, HLG, and Dolby Vision HDR formats. The receiver also has a USB port for accessing media stored on compatible USB flash drives. The Denon Setup Assistant will appear on your HDMI-connected display to help you through the setup process.
Dolby Atmos
Dolby Atmos surround sound technology dispenses with channel-based coding in favor of more advanced object-based coding, giving the sound designer the ability to precisely place sounds anywhere in the 3-dimensional space. The AVR-X2600H features the ability to connect a 5.2-channel surround sound speaker system with two additional overhead speakers, or two additional Dolby Atmos-certified up-firing speakers.
DTS:X
DTS:X brings the home theater experience to new heights with its immersive object-based audio technology, which removes the bounds of channels. The flexibility of objects allows for sound to be scaled large or small and moved around the room, leading to a richer, more immersive audio experience in a 5.2.2-channel configuration.
DTS Virtual:X and Dolby Atmos Height Virtualization
DTS Virtual:X and Dolby Atmos Height Virtualization enable you to enjoy an immersive sound experience from as little as a 2.1-channel system, creating virtual height effects.
4K Ultra HD, HDR10, HLG, Dolby Vision, and HDCP 2.2 Support
Featuring six HDMI ports, including one located on the front panel, plus an HDMI output, the AVR-X2600H is compatible with 4K Ultra HD 60 Hz content, 4:4:4 Pure Color sub-sampling, BT.2020, 21:9 video, 3D, eARC, and HDR pass-through. All HDMI ports are HDCP 2.3-compliant for 4K UHD copy-protected content. HDR10, HLG, and Dolby Vision pass-through are supported for enhanced contrast and color with compatible displays and content. 3D audio is passed through from your compatible display to the receiver via eARC over HDMI.
All-Zone TV Audio
Play the audio from your display to all zones over analog or digital connections.
Designed for Easy Setup
The receiver guides you through the setup process to help ensure proper configuration. Once you connect the receiver to your display via HDMI, the Denon Setup Assistant appears on your screen to walk you through the setup. The color-coded speaker connectors are laid out horizontally to help simplify organization and connection of your speaker wires.
Amazon Alexa Voice Control
Control the receiver hands-free with Amazon Alexa and your voice. The HEOS Home Entertainment Skill enables voice commands to control a range of functions on the receiver (and other compatible HEOS and Denon devices), including volume control, transport control, next track, and external input switching.
Google Assistant Voice Control
Start music in the HEOS app, then ask your Google Assistant to control volume, play, pause, skip tracks, and more.
Apple AirPlay 2 Built-In
Use AirPlay 2 to stream Apple music wirelessly to the receiver, or group it with other AirPlay-compatible speakers to fill your home with music.
Built-In Bluetooth and Wi-Fi Capability
Additional wireless connectivity is provided by Wi-Fi and Bluetooth. The dual-antenna transceiver system helps provide robust streaming, even in congested wireless environments.
HEOS Wireless Multi-Room Music Streaming
Share music stored on your home network, internet radio, or streaming services with your HEOS wireless speakers, or other optional HEOS-capable receivers, throughout the house. Control it all with the free HEOS app, Alexa, the Google Assistant, or Siri.
High-Resolution Audio Support
The receiver uses AKM 32-bit D/A converters for decoding audio from a variety of lossless file types, including ALAC, FLAC, and WAV at up to 24-bit / 196 kHz, along with compatibility for 2.8/5.6 MHz DSD files, which is the audio coding format of SACD. You can play them from memory devices or network sources. The AVR-X2600H also supports other file types such as MP3 and WMA.
Ready for Custom Installation
This receiver features external control and IP control capabilities for easy customization and compatibility with third-party and custom integration solutions. It features IP control capability for 3rd-party control devices and Control4 SDDP (Simple Device Detection Protocol) certification for simple integration with Control4 home automation equipment.
Remote Monitoring Capability
To support quick, reliable assistance from integrators, the AVR-X2600H features ihiji Invision, Domotz Pro, and OvrC remote monitoring and management interface and service compatibility. These programs allow custom integrators to monitor the status of connected products and troubleshoot remotely from the office or on the go, reducing the time it takes to address the issue.
Game Mode
This mode supports Auto Low Latency Mode (ALLM) for virtually lag-free gaming.
Amplifier
| Channels |
7.2
Object-Based Configuration:: 5.2.2 |
| Power Output per Channel |
2-Channel Driven:
95 W at 8 Ohms / 20 Hz to 20 kHz / 0.08% THD
125 W at 6 Ohms / 1 kHz / 0.7% THD
1-Channel Driven:
150 W at 6 Ohms / 1 kHz / 1% THD |
| Frequency Response |
10 Hz to 100 kHz +1/-3 dB (Direct Mode) |
| Speaker Impedance |
4 to 16 Ohms |
Audio Processing
| DTS Compatibility |
DTS:X |
| Dolby Compatibility |
Dolby Atmos |
| Auro 3D Support |
No |
| Upmixing Technology |
DTS Virtual:X |
Video
| HDR Compatibility |
HDR10, Dolby Vision, Hybrid Log Gamma |
| Pass-Through Support |
4K60p 4:4:4 (BT.2020) |
Connectivity
| Rear A/V Inputs |
7 x HDMI
2 x Optical TOSLINK
1 x Digital Coaxial
2 x 3RCA Component
2 x RCA Composite
4 x Stereo RCA
1 x Stereo RCA (Phono) with Ground Screw |
| Rear A/V Outputs |
2 x HDMI
1 x 3RCA Component
1 x RCA Composite
2 x RCA Subwoofer Pre-Out
1 x Stereo RCA Zone 2 Pre-Out |
| Front I/O |
1 x 1/4" / 6.35 mm Headphone Output
1 x USB Type-A
1 x 1/8" / 3.5 mm Setup Mic Input
1 x HDMI |
| Other Rear I/O |
1 x FM Antenna Terminal
1 x AM Antenna Terminal
1 x RJ45 (Ethernet)
1 x 1/8" / 3.5 mm (IR) Input
1 x 1/8" / 3.5 mm (IR) Output
1 x DE-9 (RS-232C) Input
2 x Bluetooth/Wi-Fi Antenna Terminal |
| Speaker Connectors |
7 x Binding Post Pairs |
| HDCP Support |
Version 2.2 |
| Input Impedance |
47 kOhms |
| Input Sensitivity |
200 mV |
| Signal to Noise Ratio |
100 dB (Direct Mode) |
Wireless Connectivity
| Wi-Fi |
Yes |
| Bluetooth |
Yes |
| Wireless Audio Protocols |
AirPlay 2 |
Tuner Section
| Tuner Type |
AM, FM |
| Radio Frequencies |
AM: 520 to 1611 kHz
FM: 87.5 to 108 MHz |
Power
| AC Input Power |
120 VAC, 60 Hz |
| Power Consumption |
Active: 500 W
No Sound (ECO On): 35 W
No Sound: 75 W |
Physical
| Dimensions (W x H x D) |
17.1 x 6.6 x 13.4" / 434.3 x 167.6 x 340.4 mm |
| Weight |
20.7 lb / 9.39 kg |
|
|
Designed for the ultimate music and movie surround sound experience, the Marantz MM8077 7-channel power amplifier delivers power and detail, and is rated at 150 watts per channel into 8 ohms, and 180 watts per channel into 6 ohms.
The power supply features a high current toroidal power transformer along with high power (71WVDC) filter capacitors with a total 100,000µF capacitance to easily handle sharp short-term transient peaks.
|
| |
Featuring our unique current feedback discrete power amp output stages that are identical for all channels, the MM8077 is equipped with multiple high current discrete power transistors that feature high slew rate and wide operating bandwidth to extract the most detail from todayʼs high resolution audio formats.
The output devices are mounted on our unique dual extruded aluminum alloy heat sink assembly, configured in a tunnel arrangement that provides both passive and active cooling. The massive heat sinks feature multiple ribbed fins that provide a large passive cooling area, and the assembly is book-ended with a whisper quiet fan that automatically kicks in to provide near silent active cooling when the soundtrack heats up. As the fan is mounted internally directly to the heat sinks, and not externally to the chassis cover as is often the case, even when itʼs running, itʼs designed to be whisper quiet.
|
| |
For maximum connectivity, the MM8077 features both unbalanced (RCA) and balanced (XLR) inputs, and each amp channel can be configured to use your choice of input connector. The loudspeaker terminals feature audiophile-grade construction, and are gold-plated for maximum signal transfer, and they can easily handle a wide range of audiophile speaker cable connectors.
|
| |
The MM8077 features a DC trigger input for external power on/off control, and thereʼs also dual RC-5 remote control in/out jacks for connection to a compatible Marantz A/V pre-amp/processor.
The copper-plated chassis provides isolation from extraneous noise, and features a multi-layer reinforced bottom panel assembly for maximum rigidity along with triple-layer top cover. Elegantly finished in anodized black satin, the MM8077 features the classic Marantz ringed porthole display with a blue illumination accent that includes a display on/off function.
|
| Front Panel | Aluminum/Glass-reinforced resin |
| Power Requirement | AC 120 V, 60 Hz |
| Power Consumption | 800W (Standby: 0.4W) |
| Dimensions W x H x D (Inchs) | 17.32" x 7.29" x 15.1“ |
|
- Up to 80W per Channel at 8 Ohms
- HDR, UHD, 3D Pass-Through
- HDMI with eARC
- 6 x HDMI-In / 1 x HDMI-Out
Enjoy immersive multi-channel sound with the Denon AVR-X1600H 7.2-Channel Network A/V Receiver. It delivers up to 80W of power at 8 Ohms and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay 2 support allows the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets. Onboard Wi-Fi and Ethernet connectivity enables the AVR-X1600H to access a variety of internet-based music sources. The receiver can be controlled via, and integrated into, your Google Assistant, Amazon Alexa, or Apple Siri ecosystem.
With six HDMI inputs and one HDMI output, this receiver can act as a video switcher for your HD source components. It will pass through 4K signals along with HDR10, HLG, and Dolby Vision HDR formats. The receiver also has a USB port for accessing media stored on compatible USB flash drives. The Denon Setup Assistant will appear on your HDMI-connected display to help you through the setup process.
Dolby Atmos
Dolby Atmos surround sound technology dispenses with channel-based coding in favor of more advanced object-based coding, giving the sound designer the ability to precisely place sounds anywhere in the 3-dimensional space. The AVR-X1600H features the ability to connect a 5.2-channel surround sound speaker system with two additional overhead speakers, or two additional Dolby Atmos-certified up-firing speakers.
DTS:X
DTS:X brings the home theater experience to new heights with its immersive object-based audio technology, which removes the bounds of channels. The flexibility of objects allows for sound to be scaled large or small and moved around the room, leading to a richer, more immersive audio experience in a 5.2.2-channel configuration.
DTS Virtual:X and Dolby Atmos Height Virtualization
DTS Virtual:X and Dolby Atmos Height Virtualization enable you to enjoy an immersive sound experience from as little as a 2.1-channel system, creating virtual height effects.
4K Ultra HD, HDR10, HLG, Dolby Vision, and HDCP 2.3 Support
Featuring six HDMI ports, including one located on the front panel, plus an HDMI output, the AVR-X1600H is compatible with 4K Ultra HD 60 Hz content, 4:4:4 Pure Color sub-sampling, BT.2020, 21:9 video, 3D, eARC, and HDR pass-through. All HDMI ports are HDCP 2.3-compliant for 4K UHD copy-protected content. HDR10, HLG, and Dolby Vision pass-through are supported for enhanced contrast and color with compatible displays and content. 3D audio is passed through from your compatible display to the receiver via eARC over HDMI.
All-Zone TV Audio
Play the audio from your display to all zones over analog or digital connections.
Designed for Easy Setup
The receiver guides you through the setup process to help ensure proper configuration. Once you connect the receiver to your display via HDMI, the Denon Setup Assistant appears on your screen to walk you through the setup. The color-coded speaker connectors are laid out horizontally to help simplify organization and connection of your speaker wires.
Amazon Alexa Voice Control
Control the receiver hands-free with Amazon Alexa and your voice. The HEOS Home Entertainment Skill enables voice commands to control a range of functions on the receiver (and other compatible HEOS and Denon devices), including volume control, transport control, next track, and external input switching.
Google Assistant Voice Control
Start music in the HEOS app, then ask your Google Assistant to control volume, play, pause, skip tracks, and more.
Apple AirPlay 2 Built-In
Use AirPlay 2 to stream Apple music wirelessly to the receiver, or group it with other AirPlay-compatible speakers to fill your home with music.
Built-In Bluetooth and Wi-Fi Capability
Additional wireless connectivity is provided by Wi-Fi and Bluetooth. The dual-antenna transceiver system helps provide robust streaming, even in congested wireless environments.
HEOS Wireless Multi-Room Music Streaming
Share music stored on your home network, internet radio, or streaming services with your HEOS wireless speakers, or other optional HEOS-capable receivers, throughout the house. Control it all with the free HEOS app, Alexa, the Google Assistant, or Siri.
High-Resolution Audio Support
The receiver uses AKM 32-bit D/A converters for decoding audio from a variety of lossless file types, including ALAC, FLAC, and WAV at up to 24-bit / 196 kHz, along with compatibility for 2.8/5.6 MHz DSD files, which is the audio coding format of SACD. You can play them from memory devices or network sources. The AVR-X1600H also supports other file types such as MP3 and WMA.
Ready for Custom Installation
This receiver features external control and IP control capabilities for easy customization and compatibility with third-party and custom integration solutions. It features IP control capability for 3rd-party control devices and Control4 SDDP (Simple Device Detection Protocol) certification for simple integration with Control4 home automation equipment.
Remote Monitoring Capability
To support quick, reliable assistance from integrators, the AVR-X1600H features ihiji Invision, Domotz Pro, and OvrC remote monitoring and management interface and service compatibility. These programs allow custom integrators to monitor the status of connected products and troubleshoot remotely from the office or on the go, reducing the time it takes to address the issue.
Game Mode
This mode supports Auto Low Latency Mode (ALLM) for virtually lag-free gaming.
Amplifier
| Channels |
7.2
Object-Based Configuration:: 5.2.2 |
| Power Output per Channel |
2-Channel Driven:
80 W at 8 Ohms / 20 Hz to 20 kHz / 0.08% THD
120 W at 6 Ohms / 1 kHz / 0.7% THD |
| Frequency Response |
10 Hz to 100 kHz +1/-3 dB (Direct Mode) |
| Speaker Impedance |
4 to 16 Ohms |
Audio Processing
| DTS Compatibility |
DTS:X |
| Dolby Compatibility |
Dolby Atmos |
| Auro 3D Support |
No |
| Upmixing Technology |
DTS Virtual:X |
Video
| HDR Compatibility |
HDR10, Dolby Vision, Hybrid Log Gamma |
| Pass-Through Support |
4K60p 4:4:4 (BT.2020) |
Connectivity
| Rear A/V Inputs |
5 x HDMI
2 x Optical TOSLINK
1 x Digital Coaxial
2 x RCA Composite
3 x Stereo RCA (Phono) with Ground Screw |
| Rear A/V Outputs |
1 x HDMI
1 x RCA Composite
2 x RCA Subwoofer Pre-Out
1 x Stereo RCA Zone 2 Pre-Out |
| Front I/O |
1 x 1/4\" / 6.35 mm Headphone Output
1 x USB Type-A
1 x 1/8\" / 3.5 mm Setup Mic Input
1 x HDMI |
| Other Rear I/O |
1 x FM Antenna Terminal
1 x AM Antenna Terminal
1 x RJ45 (Ethernet) Input
1 x 1/8\" / 3.5 mm (IR) Input |
| Speaker Connectors |
7 x Binding Post Pairs |
| HDCP Support |
Version 2.2 |
| HDMI CEC |
Yes |
| Input Impedance |
47 kOhms |
| Input Sensitivity |
200 mV |
| Signal to Noise Ratio |
98 dB (A-Weighted / Direct Mode) |
Wireless Connectivity
| Wi-Fi |
Yes |
| Bluetooth |
Yes |
| Wireless Audio Protocols |
AirPlay 2 |
Tuner Section
| Tuner Type |
AM, FM |
| Radio Frequencies |
AM: 520 to 1611 kHz
FM: 87.5 to 108 MHz |
Power
| AC Input Power |
120 VAC, 60 Hz |
| Power Consumption |
Active: 430 W
No Sound (ECO On): 29 W
No Sound: 39 W
Standby: 0.1 W
CEC Standby: 0.5 W |
Physical
| Dimensions (W x H x D) |
17.1 x 6.0 x 13.3\" / 434.3 x 152.4 x 337.8 mm |
| Weight |
19 lb / 8.6 kg |
|
Reviews
There are no reviews yet.