Content | The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
| Uber Mic is the perfect set-up for all your recording needs—whether it’s recording acoustic instruments & vocals, capturing pristine audio for podcasts & broadcasting, or simply bringing your gaming experience to the next level. Uber Mic does it all – start recording, streaming & broadcasting now!
• Cardioid – a directional pattern, perfect for capturing singular sound sources while eliminating unwanted room reflections and background noise
• Omnidirectional – equal output/sensitivity at all angles captures your sound sources from all directions, perfect for adding some ambience to your recordings or capturing a group of sound sources
• Figure 8 - equal output/sensitivity on two sides of the microphone, ideal for capturing two independent sound sources simultaneously
• Stereo – picks up from the left and right side of the microphone, producing a true stereo image
Features
- Easy, intuitive operation for any application
- Wide-range 30–20,000Hz frequency response delivers detailed, natural sound
- 3-capsule condenser microphone element, including single-point stereo
- 4 selectable polar patterns to customize your ideal recording
- Polar patterns: cardioid, figure-8, omnidirectional, and stereo
- 1/8” headphone jack and internal headphone amplifier
- USB/direct mixing control with mic volume control enables zero-latency recording and monitoring
- Microphone mute control ensures privacy
- LCD display shows polar pattern and currently selected control level
- Studio-quality recording and playback for accurate reproduction
- Convenient desktop mounting with threaded insert for optional stand-mounting
- Integrated stand fits easily into any setup
- iOS compatibility using the Apple iPad Camera Connection Kit (sold separately)
Specifications
- Microphone:
- Type: 3-capsule condenser USB microphone
- Capsule Size: 16mm
- Polar Patterns: Figure 8, cardioid, omni, and stereo
- Frequency Response: 30 Hz - 20 KHz
- Sensitivity: -45 dB (0 dB = 1V/Pa @ 1 kHz)
- SNR: 110 dB
- Maximum SPL: 120 dB (THD
| The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices.
The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns.
The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds.
On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.
The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter.
The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty.
Features
High sensitivity and extremely low self noise
Five switchable polar patterns for placement and application flexibility
Two-color LEDs provide quick visual indication of selected polar pattern and output overload
Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen
High sound pressure level capability and wide dynamic range
Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions
Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors
Specifications
Type: 1" large diaphragm pressure gradient microphone
Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Frequency Range: 20 to 20,000 Hz
Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
Preattenuation Pad: -6, -12,-18 dB, switchable
Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Power Requirements: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Dimensions: 2" x 1.5" x 6.3“
Net Weight: 10.6 oz
Shipping Weight: 5 lbs (2.27 kg) |
The sE X1 USB combines the hugely popular sE X1 large-diaphragm condenser microphone with high-quality USB technology to provide a professional studio microphone for use anywhere!
The sE X1 USB offers the same great performance as the original sE X1, but with the added convenience of plugging straight into a USB port on a PC or Mac, negating the need for an audio interface or external power supply. The sE X1 USB features a cardioid polar pattern with a bass cut and a -10dB pad, and it ships with a mic clip as standard.
The sE X1 USB is fitted with a USB 2.0 connection and is fully USB 3.0 compatible. As with the rest of the sE X1 range, the sE X1 USB has been treated with a Matte Black finish, meaning the microphone can easily blend into the background on stage or during video recordings. The X1 USB is compatible with the sE Isolation Pack.
- Directional pattern: Cardioid
- Frequency range: 20Hz - 20kHz
- Sensitivity: -27dBV (mV/Pa)
- Equivalent noise level: 19.8 dB
| Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power.
Specifications
Polar Pattern: cardioid
Frequency Response: 20?20.000 Hz
Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa
Max. SPL for 1% / 3% THD: 126/130 dB SPL
Equivalent Noise Level: 33 dB to DIN 45 412
Electrical Impedance: 200 ohms
Recommended Load Impedance: >2.000 ohms
Power Requirement: 9 to 52 volts universal phantom power
Current Consumption: approx. 2 mA
Connector : 3-pin XLR
Cable Length: 1.5 m (5 ft.)
Finish: matte black
Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.)
Net / Shipping Weight: 23/192 g (0.8/6,8 oz.)
Optional Accessorires: B15, B18 |
AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones. Lyra has four selectable capture modes—Front, Front + Back, Tight Stereo and Wide Stereo—making it capable of capturing audio in a variety of applications and up to 24-bit/192kHz high-resolution audio. AKG K371 professional studio headphones combine performance, accuracy and supreme comfort in a compact, folding design that’s ideal for production in the studio or on location. K371s are precision-engineered to match AKG’s
Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail.
The package includes: 1 x USB-C to USB-A cable, 1 x 1.2 m (2.5) straight headphone cable, 1 x 3.0 m (9.8) straight headphone cable, 1 x 3.0 m (9.8) coiled headphone cable, 1 x 3.5 mm (1/8/") to 6.5 mm (1/4/") headphone adapter, 1 x Dual-headphone adapter (supports two headphone connections), 1 x Protective headphone carrying pouch
Specifications (Microphone)
- Type: Condenser
- Polar Pattern: Front, Front & Back, Tight Stereo and Wide Stereo
- Frequency Response: 20 to 20,000 Hz
- Microphone Bit Depth/Sample Rate: 24-bit/192 kHz
- Max SPL: 129 dB SPL (0.5% THD)
- Microphone Power Requirement / Consumption: 5V USB / 75 mA
- Output Connection: USB 2.0
- Headphone Output Impedance: 16Ω
- Headphone Power Output (RMS): 43 mW
- Headphone Frequency Response: 20 Hz – 22 kHz
- Microphone Headphone Output S/N Ratio: 98.0dB
Specification (Headphones)
- Headphone Type: Closed Back
- Driver Size: 50mm
- Voice Coil: Pure OFC voice coil
- Frequency Response: 5 Hz – 40 kHz
- Sensitivity (SPL): 114 dB SPL/V @ 1 kHz
- Impedance: 32 ohms
- Weight: 255g
|
Reviews
There are no reviews yet.