Marantz Professional MPM-1000 Large-Diaphragm Condenser Microphone

59.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The MPM-1000 from Marantz Professional is a cardioid condenser microphone with a pure-aluminum-plated, 18mm-diameter diaphragm capsule that captures audio in high-quality critical recording applications. It can be used by engineers, musicians, and producers in environments such as recording studios, for live stage, in project studios, and more. The microphone is great for recording closely spaced […]

 

Read more

The MPM-1000 from Marantz Professional is a cardioid condenser microphone with a pure-aluminum-plated, 18mm-diameter diaphragm capsule that captures audio in high-quality critical recording applications. It can be used by engineers, musicians, and producers in environments such as recording studios, for live stage, in project studios, and more.

The microphone is great for recording closely spaced subjects by maintaining a good degree of isolation, and is also an excellent choice for recording live performances when sound comes from many directions. The tightly defined pattern preserves excellent isolation and prevents unwanted feedback. The package comes complete with windscreen, shockmount, tripod stand, and an XLR cable.

Sound Field

Mono
Transducer Condenser
Diaphragm 0.71\” (18 mm)
Polar Pattern Cardioid
Frequency Range 20 Hz to 20 kHz
Signal to Noise Ratio 77 dB
Maximum SPL 136 dB SPL
Impedance 200 ohms +/- 30% @ 1 kHz
Load Impedance 1000 ohms% @1 kHz
Sensitivity -38 dB
Power Requirements 48 V
Output Connectors 3-pin XLR
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “Marantz Professional MPM-1000 Large-Diaphragm Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Marantz Professional MPM-1000 Large-Diaphragm Condenser Microphone removeRODE NT-5-MP Matched Pair Condenser Microphones removeAKG SE300B - Preamp unit removeRODE NT-6 COMPACT CONDESER MICROPHONE Demo or end of life removeAKG C 451B - Condenser cardioid microphone removeSHURE SM-81LC - Cardioid Condenser Microphone remove
NameMarantz Professional MPM-1000 Large-Diaphragm Condenser Microphone removeRODE NT-5-MP Matched Pair Condenser Microphones removeAKG SE300B - Preamp unit removeRODE NT-6 COMPACT CONDESER MICROPHONE Demo or end of life removeAKG C 451B - Condenser cardioid microphone removeSHURE SM-81LC - Cardioid Condenser Microphone remove
Image
SKU134.801H11RD00005SE 300BH11RD00016C 451BSM81-LC
Rating
Price 59.00 incl. GR VAT 329.00 incl. GR VAT 178.00 incl. GR VAT 179.00 incl. GR VAT 347.22 incl. GR VAT 345.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Only 2 left in stock

Available on backorder

In stock

In stock

Only 1 left in stock (can be backordered)

AvailabilityOnly 1 left in stock (can be backordered)Only 2 left in stockAvailable on backorderIn stockIn stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe MPM-1000 from Marantz Professional is a cardioid condenser microphone with a pure-aluminum-plated, 18mm-diameter diaphragm capsule that captures audio in high-quality critical recording applications. It can be used by engineers, musicians, and producers in environments such as recording studios, for live stage, in project studios, and more. The microphone is great for recording closely spaced subjects by maintaining a good degree of isolation, and is also an excellent choice for recording live performances when sound comes from many directions. The tightly defined pattern preserves excellent isolation and prevents unwanted feedback. The package comes complete with windscreen, shockmount, tripod stand, and an XLR cable. Sound Field
Mono
Transducer Condenser
Diaphragm 0.71\" (18 mm)
Polar Pattern Cardioid
Frequency Range 20 Hz to 20 kHz
Signal to Noise Ratio 77 dB
Maximum SPL 136 dB SPL
Impedance 200 ohms +/- 30% @ 1 kHz
Load Impedance 1000 ohms% @1 kHz
Sensitivity -38 dB
Power Requirements 48 V
Output Connectors 3-pin XLR
The NT5 matched pairs are a masterpiece of small-diaphragm cardioid- condenser microphone design.Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a .5? capsule, an active J-FET impedance converter with bipolar output buffer. Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts. SPECIFICATIONS: Acoustic principle: Externally polarised single diaphragm Directional pattern: Cardioid Frequency range: 20Hz - 20kHz Output impedance: 100? Signal noise ratio din iec 651:  78dB Equvalent noise:  Maximum spl: 143 dB @ 1% THD into 1k_ Sensitivity: -38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL Power supply voltage:  P48 Supply (38V?52V), P24 Supply (20V-26V) Current consumption: 4 mA, 2 mA, Weight: 100g

Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

The R?DE NT6 is specifically designed for difficult mounting applications. Although
clearly relevant to instrument mic'ing, the new NT6 is extremely well suited to any
situation where a small 'unobtrusive' but powerful microphone system is required.
The NT6 utilises the 1/2" (externally biased) gold sputtered true condenser transducer
used in the internationally renowned R?DE NT5. The capsule is designed to attach to
a custom made, multi-position swivel mount allowing it to be independently positioned
with ease.
To further increase the versatility of the NT6, it is supplied with 2 thread adaptors - 1/4"
to 5/8" and 1/4" to 3/8" that enable the capsule assembly to be securely attached to a
wide variety of mic stands, tripods and boom poles.
The capsule is connected to the pre-amplifier (body) by a custom 3 m Kevlar? fibre reinforced
cable. Housed within the heavy duty satin-nickel-plated body, is a state-of-the-art low noise
balanced output preamplifier, exhibiting a wide dynamic range and full frequency response.
The surface-mount pre-amplifier circuit also incorporates a 2-position variable pad: 0 dB an -10 dB
attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response
to 80 Hz high pass filter; both conveniently located away from the capsule, providing additional
control without the need to move the capsule once in position.
The NT6 is intended for Film, Television, Broadcast, Live Performance, Theatre, Television,
Surround and Environmental recording applications or wherever your imagination takes you.
The NT6 is produced in R?DE's design and manufacturing facility in Sydney, Australia. Utilising
state of the art computer controlled machining and assembly technologies, R?DE is able to
achieve levels of finish and repeatability of the most exacting standards and tolerances.
The NT6 comes supplied with Microphone Preamp (Body), Capsule, 3 m Kevlar? fibre reinforced
cable, RM5 Stand Mount, 2-axis Swivel Mount, 2 thread adaptors, ZP1 Zip Pouch and WS5 Wind Shield.
 
FEATURES:
? 1/2? (externally biased) gold sputtered true condenser capsule ? Heavy duty satin-nickel-plated body
? 2-position variable pad: 0 dB and -10 dB ? 2-position variable high-pass filter: flat and 80 Hz ? Surface
mount technology ? Low noise ? Wide dynamic range ? Full frequency response ? Supplied complete
with 2-axis swivel mount, 2 thread adaptors, M5 clip, WS5 (Black) Wind Shield and Soft Pouch ? Designed
& manufactured in Australia ? Full 2 year guarantee 
 
Operation power:
The NT6 is designed to operate from phantom power to the P48 standard. The NT6 will operate
between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output XLR connector. 
Operation output impedance:
Output Impedance: The NT6 will operate satisfactorily into a load impedance as low as 1 kΩ. If a
load below this is used, the output signal level will be reduced. The NT6 output is balanced between
pin 2 (hot) and pin 3 (cold). Pin 1 is ground.
 Acoustic principle:
Externally polarised 1/2" (13mm) pressure gradient condenser
Directional pattern:  Cardioid
Frequency range:
40 Hz ~ 20,000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output impedance: 200 Ω
Signal noise ratio din iec 651:
75 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 19 dB SPL (per IEC651, IEC268-15)
Maximum spl:
138 dB (@ 1% THD into 1 kΩ)148 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity:
-38 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB
Dynamic range din iec 651: 119 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Weight: 386 grm.
Maximum output voltage: 6 dBu (@ 1% THD into 1 kΩ)
Pin assignment:
3 pin XLR, balanced output between pin 2(+), pin (-) & pin 1 (ground)
 

This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip. For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone. The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments. The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original. Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout. Three-year warranty. Specification Polar pattern: cardioid Frequency range: 20?20,000 Hz Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa) Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB) Equivalent noise level: 18 dB-A to DIN 45 412 Signal/noise ratio (A-weighted): 76 dB Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz Electrical impedance: Recommended load impedance: >1.000 Ohms Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15 Current consumption: Connector: 3-pin male XLR Finish: satin nickel plated Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.) Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.) Standard accessories: W 90 windscreen, SA 40 stand adapter

 Cardioid Condenser with 10dB Attenuator and 3 Position Low-Cut Filter

One of the world's great studio microphones, the SM81 provides precise, detailed sound reproduction, is excellent for studio recording, and is rugged enough for live sound reinforcement.

  • A standard for acoustic instruments, including guitar and cymbals
  • Selectable, low-frequency response -- either flat, 6dB/octave roll-off, or 18 dB/octave roll-off
  • Built-in, switchable 10 dB attenuator for use in high SPL situations
  • Phantom power only
  • Windscreen included
  • Low noise and high output clipping
  • Cardioid condenser
  • Frequency response: 20 to 20,000 Hz
Weight1.00 kg2.00 kg0.50 kg2.00 kg0.76 kg0.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 2.00 kg
Weight 0.50 kg
Weight 2.00 kg
Weight 0.76 kg
Weight 0.60 kg