Content |
Woofer 15\'\' + driver. 800W 8ohm. Made of plywoodSpecifications:Type: 2-ways Passive.Woofer: 15“.Impedance: 8ohm.Tweeter: 1.75“.Impedance: 8ohm.Power Output: 800W.Frequency Response: 55 Hz - 20 kHz.Sensitivity: 96 dB.Max. SPL: 124 dB.Impedance: 8ohm.Connector :2 x XLN4.Material: MDF
|
- Passive 2-way bass-reflex installation speaker
- 200 W permanent load capacity
- 118 dB maximum sound-level pressure
- 10" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
50.8 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
200 W
Peak power
400 W
Frequency response
65 - 19000 Hz
SPL (1W/1m)
95 dB
Max. SPL
118 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
Black
Cabinet construction
vented
Width
300 mm
Height
550 mm
Depth
270 mm
Weight
12,2 kg |
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 10" high-output LF transducer with 2" voice coil | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | 90° x 40° constant directivity horn | Built in passive crossover and selectable line transformer | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | LICC (Low Impedance Compensated Crossover) network |
12 brass suspension points (M8)
Acoustical Specifications |
---|
Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 118 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 11 | | System Sensitivity: | 95 dB | | Nominal Impedance: | 16 Ω | | Power Handling: | 200 Watt | | Peak Power Handling: | 800 Watt | | Recommended Amplifier: | 400 | | Protections: | Dinamyc | | Crossover frequencies: | 2000 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.5" HF driver, 1" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 106 dB | | Woofer: | 10" woofer, 2.5" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 180 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 5m, 4-adriges Neopren Kabel | | Constant voltage transformer: | 70/100 | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 350 / 13.78 mm/inch | | Width: | 350 / 13.78 mm/inch | | Depth: | 320 / 12.60 mm/inch | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
- Equipped with: 2" tweeter and 10" woofer
- Equipped with Yamaha\'s "Wide Dispersion CD Waveguide Horn“
- Rated power: 700 W (PGM)
- Biamp mode
- Setting for floor monitor
- Lightweight but durable wooden cabinet with high quality polyurea coating
- Stand flange mount for two angles
- Rotatable horn and various U-bracket options (UB-DZR10H/V) for flexible setup and placement
- Dimensions (W x H x D): 315 x 537 (with rubber feet) x 345 mm
- Weight: 14.0 kg
|
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
FBT is launching the next step in the PROMAXX range of portable PA enclosures. With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic.
The PROMAXX feature-set is matched by the enclosure’s versatility, with options for pole-mounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet.
Common features:
- bass reflex design cabinet
- 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
- 90°H x 60°V constant directivity horn
- Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles
- Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
- Speakon NL-4 IN and LINK OUT connectors
Code: |
40685 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
122/127 dB |
Dispersion: |
90° x 60° HxV |
Crossover Frequency: |
1.8 KHz |
Recommended HP filter: |
50Hz - 24dBoct |
Input connector: |
2 x Speakon NL4 in&throu |
Net Dimension (WxHxD): |
320x550x275 / 12.6x21.6x10.8 mm/inch |
Net Weight: |
8.9/19.62 kg/lb |
Transport Dimension (WxHxD): |
400x630x360 / 15.7x24.8x14.2 mm/inch |
Transport Weight: |
11.4/25.13 kg/lb |
| The PS-10 JB-Systems is a compact passive speaker with a woofer 10 "is the perfect choice for small applications where high power is not necessary. It is a versatile device that can be used in different installations, there is even a special holder designed for use as a monitor.
JB-Systems Specification PS-10:
This enclosure is suitable for fixed installation and mobile application, the rugged polypropylene housing provides excellent protection components. SP-10 can be mounted on a stand with a standard speaker connection 35mm and can be mounted easily using the integrated mounting points. And as mentioned earlier, you can use the stand included for use as a monitor. This device also has a sturdy handle for easy transport and rubber feet protect the bottom of your speaker.
- passive Speaker
- 10 "woofer
- 1.35 "compression driver
- Power: 160W RMS, 320W peak
- Impedance: 8 Ohm
- Speakon In / Out
- polypropylene housing
- sturdy handle
- Rubber feet
- Can be mounted on standard stand (35mm)
- Points integrated mounting
- Supplied with bracket for use as a monitor
- Weight: 10.3kg
|
Reviews
There are no reviews yet.