Content |
The Black Line version of Little Mark 250 offers the same features as the standard Little Mark 250.
The Black Line products are made using the same cutting-edge technology, high-quality components and the same quality control standards that apply to all of our products.The Little Mark 250 Black Line is a smart, inexpensive choice for those who donʼt need the full power of a 500W head. Itʼs great for practicing, rehearsing, and small gigs.
- INPUT: impedance 500 Kohm, max. voltage 15 Vpp
- BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
- EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
Controls
- GAIN: -60 dB to +23 dB range
- MASTER VOLUME
- LINE OUT LEVEL
- GROUND LIFT (switch on rear panel)
- PRE/POST EQ (switch on rear panel)
Equalization
- LOW: center frequency: 40 Hz; level: ±16 dB
- LOW MID: center frequency: 360 Hz, level: ±16 dB
- HIGH MID: center frequency: 800 Hz, level: ±16 dB
- HIGH: center frequency: 10 kHz, level: ±16 dB
- VPF (Variable Pre-shape Filter) center frequency 380 Hz
- VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz
- LINE OUT: balanced XLR, max. voltage 20 Vpp
- EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
- TUNER OUT: unbalanced, max. voltage 2 Vpp
- SPEAKER OUT: speakon/1/4" combo, 1/4“
- WEIGHT: 5.07 lbs / 2.3 kg
- WIDTH: 10.87 in. / 27.6 cm
- DEPTH: 9.84 in. / 2.5 cm
- HEIGHT: 3.27 in. / 8.3 cm
- OUTPUT POWER: 250W RMS @ 4 ohms / 150W RMS @ 8 ohm
- POWER REQUIREMENT: 100/120V; 230V; 240V - 50/60Hz
|
Eden E300 Bass Amplifier Head - Lightweight and Compact. Eden's Proprietary Enhance Control deliver classic Eden tone. The Eden E300 bass amplifier head is a 300 watt head featuring stereo aux tape or cd input, auto compression, Enhance, 3 band eq, balanced DI, and headphones jack output. Eden E300 Bass Amplifier Head Features: > 300 Watts RMS @ 4 Ohms +/-3dB. > 3 band tone with Enhance control > Front panel 1/8" MP3 input for practice & rehearsal > Front panel Aux in > Front panel XLR DI > Headphone out > Dimensions: 15.8 x 10.3 x 3.4 inches > Weight: 32 LBS
|
For superior power and sound quality, this amp takes first place. Its a serious piece of kit that has a host of features that you will need when out on the road or recording. Dual input, Bass, treble, and twin parametric Mid, switchable compressor and limiter, DI socket, Tuner output and FX loop. It packs a massive 300 watts output stage that can deliver into a 4 ohm load, hook it up to a Laney RB115 to really blow your band mates, and the audience, away!
Power | 300 Watt | Driver | 2 x 10'' Celestion & Switchable Horn | Effects | - | Modeling Technology | - | Channels | 1 | Equalizer | Bass, Twin Parametric Mid ( Hi and Lo ), Treble | Output | Extension Loudspeaker, Tuner Out | Inputs | Normal Gain, High Gain | Tuner | - | Controls | Gain, Enhance, Bass, Twin Parametric Mid (Hi and Lo), Treble, Volume | Footswitch | - | FX Loop | FX Send / FX Return | DI Socket | Pre EQ Balanced XLR | Dimensions ( W x H x D ) | 57.9 cm x 42.6 cm x 39.6 cm | Weight | 25 kg |
|
All of our BG250 combos share the same fundamental tone, yet they alsosound unique. Subtle details and the fact that you can customize the amps with TonePrint effects and settings makes sure that you will always be able to get the sound you are looking for no matter which BG250 you choose.
- Ultra-light, Ultra-powerful
- Two TonePrint Slots
- Intelligent Tone Shaping Tools
- Built-in Tuner for 4, 5 and 6 String Basses.
BG250-112 gives you the best from both worlds. Tight and powerful sound with a strong presence in the mids. Make it bassy and old school, or modern and crisp. The choice is yours! It's light yet super powerful,features intelligent tone shaping toolsand has an onboard tuner for 4, 5 and 6 string basses.Add to that, the ultimate effects solution: Dual TonePrint! You can swap effect types on the fly and you even get custom TonePrints created by some of the greatest bass players totally free of charge.
Power: | 200 Watts> | Speaker: | 1 x 12'' | Modeling Technology: | No | Effects: | Yes | Tuner: | Υes | Power: | 250 Watts | Driver: | 1 x 12'' Custom driver woofer,1 x 1'' Custom piezo tweeter | Effects: | 6 Effect Types | Modeling Technology: | - | Channels: | 1 | Equalizer: | Bass: Cut@80Hz / Boost@100Hz,Mid: Cut@500Hz / Boost@800Hz,Treble: Cut@1,800Hz / Boost@2,500Hz | Output: | 1x Balanced Di Out - Seamless Recording or PA output - Headphone out x 1 | Inputs: | 1 x Rehearsal Input | Tuner: | Yes | Controls: | Gain, Bass, Middle, Treble, Toneprint A/B, Master, Mute, Pre EQ/Post EQ | Footswitch: | Yes ( Optional ) | FX Loop: | - | DI Socket: | Yes | Dimensions ( W x H x D ): | 45,8 x 37.5 x 54 cm. | Weight: | 16 kg |
|
Now we're getting into serious power and performance territory. The RB6 can deliver 165 watt of floor shaking bass from its precision tweaked power amp stage. Connect a RB115 or RB410 to really get the neighbours complaining. Check out its versatile EQ section (Bass, Twin parametric EQ, Treble and Enhance) controls to dial in any tone you like.
Power | 165 Watt | Driver | 1 x 15'' Celestion & Switchable Horn | Effects | Compressor, Limiter | Modeling Technology | - | Channels | 1 | Equalizer | Bass, Twin Parametric Mid (Hi & Lo), Treble | Output | Extension Loudspeaker, Tuner Out | Inputs | Normal Input, High Input | Tuner | - | Controls | Gain, Enhance, Bass, Twin Parametric Mid ( Hi & Lo ), Treble, Master Volume | Footswitch | - | FX Loop | FX Send / FX Return | DI Socket | D.I Balanced XLR | Dimensions ( W x H x D ) | 50.2 cm x 56.5 cm x 49 cm | Weight | 29 kg |
|
The PF-800 delivers the superior performance of Ampegʼs Portaflex Series bass heads in an ultra-compact 800-watt design perfect for power-hungry bassists that demand uncompromising tone. Plug into a pair of Portaflex bass enclosures for a vintage-styled rig that is extremely powerful, portable and undeniably Ampeg. |
Reviews
There are no reviews yet.