| Content |
- SPEAKER SIZE: 2x10”
- TWEETER: 1” VOICE COIL
- CAB Power Handling (AES Standard): 400W - RMS
- CROSSOVER FREQUENCY: 3.5 kHz
- FREQUENCY RESPONSE: 40Hz to 20kHz
- SENSITIVITY: 101 dB SPL
- IMPEDANCE: 8Ω
- REFLEX/CAB DESIGN: REAR/WEDGE
- DIMENSIONS: 23.38”/59,4cm | 18.93”/48,1cm | 20.39”/51,8cm
- WEIGHT: 40.34lbs/18,3kg
|
This is the speaker cabinet for the bass player who demands the ultimate in a single, compact cabinet setup. The SVT-410HLF delivers devastating low-end bass, all the way down to 28Hz, thanks to four 10” speakers working together to move a tremendous amount of air. The SVT-410HLF actually moves 10% more air than two 18-inch speakers, and 25% more than three 15-inch speakers! And those leviathans simply canʼt respond to transient peaks as quickly as four tens can.
The SVT-410HLF also delivers superb top-end, thanks to its 1” horn driver, strategically crossed over at 4kHz. This is a favorite enclosure for such artists as Meshell Ndegeocello, John McVie of Fleetwood Mac, and Ricky Skaggsʼ bass player, Mark Fain.The Ampeg SVT-410HLF is the supreme speaker enclosure for the multi-string bass player seeking both superior power handling and true high-fidelity performance.
|
Eden WTX264 Bass Amplifier Head Features: >Eden's proprietary Enhance control >3-band EQ with Dynamic Bass Boost and Mid-shift functions >Studio-quality DI with level and ground lift >FX loop >Stereo Aux Inputs >Tuner and Headphone outputs >Two 1/4" and one NL-4 (Speakon) Speaker outputs >Optional Rack-mount hardware >Power 4 Ohms: 260-300W RMS @4 Ohms >Damping Factor: 4000 >Distortion: .006% >Frequency Response: 10Hz-20KHz ±2dB >Headroom: 3dB >Dimensions: 8“W X 2.5“H X 9“D >Weight: 4.3 LBS | Just over a decade ago, Marco De Virgiliis started pioneering small, lightweight amps; the Markbass Little Mark heads started a new era in bass amplification, inspiring many other companies to follow their lead.Now, you'll be amazed that such a warm, rich and "explosive” sound comes from an amp smaller than our groundbreaking Little Mark heads! And—despite its small size—the Big Bang is packed with extra features that customers have been asking for: aux in, headphone output with level control, plus mute and VLE and VPF filters with footswitch control. Other features, already appreciated by Little Mark users, include a simple and effective 4-band EQ, effects loop, and level control and pre/post EQ switch for theXLR DI output. |
For the bassist, VOX introduces the newest member of the Pathfinder family: the Pathfinder 10 Bass.
Guitarists have long been familiar with these best-selling, portable, solid-state combo amps, and now bass players can experience a taste of the legendary VOX brand with the Pathfinder Bass 10. From the diamond grille cloth and basket-weave vinyl leather to the vintage chicken-head knobs, the Pathfinder Bass 10 loudly proclaims its VOX pedigree. This dual- speaker, deep-thumping, portable amp is ideal for the on-the-go bass player. In addition to Treble and Bass tone-shaping controls, the Bright switch offers an edgy boost to the upper harmonics. Turning up the Drive control provides a warm, bass distortion that adds character and vitality to the tone. The Pathfinder Bass 10 pumps out 10 watts into a pair of 5" VOX bulldog speakers. A headphone/line output jack is also provided for silent practice and recording.
Specification - Output Power: 10 Watts RMS
- Speaker: VOX Bulldog 5" x 2 (4 ohms)
- Input: INPUT jack
- Output: PHONES/LINEOUT jack
- Controls: DRIVE, TREBLE, BASS, VOLUME, BRIGHT switch
- Dimensions (W x D x H): 380 x 170 x 277mm (including projections) / 14.98 x 6.69 x 10.91 inches
- Weight: 5.6kg / 12.32 lbs
|
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10"
Power Handling (RMS) 640W
Impedance 4 Ohms
Weight - 73 kgs
Dimensions (mm) 675x1265x410
|
Reviews
There are no reviews yet.