| Content |
- SPEAKER: 1x15“
- TWEETER: piezo
- BASS REFLEX: rear
- IMPEDANCE: 8 ohms
- SPEAKER POWER HANDLING:
- 400W RMS (AES Standard)
- AMP OUTPUT POWER:
- 300W RMS @ 8 ohms
- PREAMP: solid state
- FREQUENCY RESPONSE: 40 Hz to 18 kHz
- CROSSOVER FREQUENCY: 3.5 kHz
- SENSITIVITY: 100 dB SPL
- WEIGHT: 40.79 lbs / 18.5 Kg
- HEIGHT: 18.27 in. / 46.4 cm
- WIDTH: 18.27 in. / 46.4 cm
- DEPTH: 18.9 in. / 48 cm
|
The more aggressive tone of the 10” speakers means you can often get by just with this combo, but it does also stack with any 8 ohm Traveler or Standard cab, for more volume and headroom. The CMD 102P combo just might be our most versatile combo! It's perfect for any situation. The angled cabinet design allows the unit to be used either as a floor monitor or in standard vertical position. The built-in VLE and VPF filters help create a warm and natural sound.
|
Ampegʼs Portaflex PF-500 bass head delivers a staggering 500W of power in an ultra-compact design providing pure Ampeg tone in an extremely portable package. Precise tone controls and gig-friendly input/output options provide ultimate flexibility. Pair it with our PF Series flip-top cabinets for the vintage styling and portability of Ampegʼs iconic Portaflex originals.
| Power: | 500W RMS @ 4 ohms 5% THD | | Channels: | 1 | | Equalizer: | 3 band EQ | | Inputs: | Bass Input, Audio Input, Power Amp In | | Outputs: | Headphones Output, Speaker Output Speakon, Tuner Out, Preamp Out, XLR Line Out Jack | | Controls: | Mute, -15db, Compression, Gain, Ultra Hi / Lo, 3 Band EQ, Frequency, FX mix, Volume | | Dimensions ( W x H x D ): | 27.5 x 6.9 x 27.2 cm | | Weight: | 3.5 kg |
|
Eden WTX264 Bass Amplifier Head Features: >Eden's proprietary Enhance control >3-band EQ with Dynamic Bass Boost and Mid-shift functions >Studio-quality DI with level and ground lift >FX loop >Stereo Aux Inputs >Tuner and Headphone outputs >Two 1/4" and one NL-4 (Speakon) Speaker outputs >Optional Rack-mount hardware >Power 4 Ohms: 260-300W RMS @4 Ohms >Damping Factor: 4000 >Distortion: .006% >Frequency Response: 10Hz-20KHz ±2dB >Headroom: 3dB >Dimensions: 8“W X 2.5“H X 9“D >Weight: 4.3 LBS |
For the bassist, VOX introduces the newest member of the Pathfinder family: the Pathfinder 10 Bass.
Guitarists have long been familiar with these best-selling, portable, solid-state combo amps, and now bass players can experience a taste of the legendary VOX brand with the Pathfinder Bass 10. From the diamond grille cloth and basket-weave vinyl leather to the vintage chicken-head knobs, the Pathfinder Bass 10 loudly proclaims its VOX pedigree. This dual- speaker, deep-thumping, portable amp is ideal for the on-the-go bass player. In addition to Treble and Bass tone-shaping controls, the Bright switch offers an edgy boost to the upper harmonics. Turning up the Drive control provides a warm, bass distortion that adds character and vitality to the tone. The Pathfinder Bass 10 pumps out 10 watts into a pair of 5" VOX bulldog speakers. A headphone/line output jack is also provided for silent practice and recording.
Specification - Output Power: 10 Watts RMS
- Speaker: VOX Bulldog 5" x 2 (4 ohms)
- Input: INPUT jack
- Output: PHONES/LINEOUT jack
- Controls: DRIVE, TREBLE, BASS, VOLUME, BRIGHT switch
- Dimensions (W x D x H): 380 x 170 x 277mm (including projections) / 14.98 x 6.69 x 10.91 inches
- Weight: 5.6kg / 12.32 lbs
|
The Minimark has been astounding people since its first introduction at NAMM some years ago. The Minimark 802 is even more sonically impressive, with an incredible warm and focused sound thanks to the two 8" custom woofers and an onboard piezo tweeter. The Minimark 802 is a brilliant choice for rehearsing, practicing, teaching and recording and it can be used also on gigs, of course! It is also ideal for double bass and acoustic bass, with a faithfully reproduction of acoustic instruments.
|
Reviews
There are no reviews yet.