| Content |
- IMPEDANCE8 or 4 ohms
- SPEAKER SIZE 2x10 in.
- BASS PORTSfront
- TWEETER 1" compression driver with custom horn
- POWER HANDLING m400W RMS (AES Standard)
- CROSSOVER FREQUENCY 3.5 kHz
- FREQUENCY RESPONSE 40 Hz to 20 kHz
- SENSITIVITYm 101 dB SPL
- WEIGHT 38.58 lbs / 17.5 Kg
- WIDTH 23.23 in. / 59 cm
- HEIGHT 18.7 in. / 47.5 cm
- DEPTH 18.98 in. / 48 cm
| The Micromark now has a big brother—one who is still small enough to deliver the Markbass sound anywhere, but big enough to provide a fuller sound with plenty of bottom end! The Micromark 801 features a single yellow 8” Markbass custom speaker. The original (6”) Micromark has been astounding people since its first introduction a few years ago. But this new version is even more sonically impressive! |
All of our BG250 combos share the same fundamental tone, yet they alsosound unique. Subtle details and the fact that you can customize the amps with TonePrint effects and settings makes sure that you will always be able to get the sound you are looking for no matter which BG250 you choose.
- Ultra-light, Ultra-powerful
- Two TonePrint Slots
- Intelligent Tone Shaping Tools
- Built-in Tuner for 4, 5 and 6 String Basses.
BG250-112 gives you the best from both worlds. Tight and powerful sound with a strong presence in the mids. Make it bassy and old school, or modern and crisp. The choice is yours! It's light yet super powerful,features intelligent tone shaping toolsand has an onboard tuner for 4, 5 and 6 string basses.Add to that, the ultimate effects solution: Dual TonePrint! You can swap effect types on the fly and you even get custom TonePrints created by some of the greatest bass players totally free of charge.
| Power: | 200 Watts> | | Speaker: | 1 x 12'' | | Modeling Technology: | No | | Effects: | Yes | | Tuner: | Υes | | Power: | 250 Watts | | Driver: | 1 x 12'' Custom driver woofer,1 x 1'' Custom piezo tweeter | | Effects: | 6 Effect Types | | Modeling Technology: | - | | Channels: | 1 | | Equalizer: | Bass: Cut@80Hz / Boost@100Hz,Mid: Cut@500Hz / Boost@800Hz,Treble: Cut@1,800Hz / Boost@2,500Hz | | Output: | 1x Balanced Di Out - Seamless Recording or PA output - Headphone out x 1 | | Inputs: | 1 x Rehearsal Input | | Tuner: | Yes | | Controls: | Gain, Bass, Middle, Treble, Toneprint A/B, Master, Mute, Pre EQ/Post EQ | | Footswitch: | Yes ( Optional ) | | FX Loop: | - | | DI Socket: | Yes | | Dimensions ( W x H x D ): | 45,8 x 37.5 x 54 cm. | | Weight: | 16 kg |
|
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10"
Power Handling (RMS) 640W
Impedance 4 Ohms
Weight - 73 kgs
Dimensions (mm) 675x1265x410
|
This is the speaker cabinet for the bass player who demands the ultimate in a single, compact cabinet setup. The SVT-410HLF delivers devastating low-end bass, all the way down to 28Hz, thanks to four 10” speakers working together to move a tremendous amount of air. The SVT-410HLF actually moves 10% more air than two 18-inch speakers, and 25% more than three 15-inch speakers! And those leviathans simply canʼt respond to transient peaks as quickly as four tens can.
The SVT-410HLF also delivers superb top-end, thanks to its 1” horn driver, strategically crossed over at 4kHz. This is a favorite enclosure for such artists as Meshell Ndegeocello, John McVie of Fleetwood Mac, and Ricky Skaggsʼ bass player, Mark Fain.The Ampeg SVT-410HLF is the supreme speaker enclosure for the multi-string bass player seeking both superior power handling and true high-fidelity performance.
|
The Minimark has been astounding people since its first introduction at NAMM some years ago. The Minimark 802 is even more sonically impressive, with an incredible warm and focused sound thanks to the two 8" custom woofers and an onboard piezo tweeter. The Minimark 802 is a brilliant choice for rehearsing, practicing, teaching and recording and it can be used also on gigs, of course! It is also ideal for double bass and acoustic bass, with a faithfully reproduction of acoustic instruments.
|
Reviews
There are no reviews yet.