A two-channel, two-tone, hand-wired Marshall combo that works everywhere. The Marshall Astoria Dual 30W tube combo is an original two-channel design. Via the 1×12 in. 75W Celestion Creamback, the clean channel ranges from brilliant clean sounds to classic Marshall crunch, and the overdrive channel takes over from there offering plenty of gain and tone for […]
A two-channel, two-tone, hand-wired Marshall combo that works everywhere.
The Marshall Astoria Dual 30W tube combo is an original two-channel design. Via the 1×12 in. 75W Celestion Creamback, the clean channel ranges from brilliant clean sounds to classic Marshall crunch, and the overdrive channel takes over from there offering plenty of gain and tone for heavier riffs and solos.
As well as having the consistent Edge and Power Reduction features, this model also has a Body switch to broaden low end frequencies, as well as a Master volume.
On the rear panel of the Astoria Dual is a footswitchable FX loop with Send, Return and Level controls. If unused, the Level control can be used as a volume boost.
The Astoria Series is about pure, unfettered vintage tone”from loud, unbroken clean to sublime saturation. Built for the connoisseur using precision point-to-point hand-wiring, Astoria is for the serious guitarist who craves authentic tone, but who also wants contemporary features. Astoria offers, across the series, footswitchable features such as: valve-driven FX Loop with independent level control, +20dB gain boost and dual channels, as well as tonal switching and modern power reduction.
To achieve the innovative marriage of authentic tonal character and contemporary features, the Astoria Series uses turrets mounted on the PCB, allowing the hand-wiring and more complex switching circuitry to elegantly coexist on a single board. Please note: ALL of Astoria\’ tonal circuitry is point-to-point hand wired for quality and authenticity of tone.
Astoria\’ all-tube heart consists of 12AX7 in the preamp, GZ34 rectification and KT66 output stage, which is cathode biased and has no negative feedback.
The output and mains transformers are designed specifically for Astoria, and some of Astoria\’ pots use specially selected log tapers to be more balanced across their effective ranges.
Astoria also features Hi & Lo inputs, with the Hi input providing an extra 6dB of sensitivity”a characteristic of many classic, vintage amplifiers.
All three Astoria models are expertly crafted and are designed, engineered and constructed to the highest standards at the Marshall factory in Bletchley, England.
The Look The Astoria Series look is unique, with a quirky œboutique flavor. The Astoria combos have their control panel on top of the cabinet, like vintage Marshall combos, with the Astoria heads being œsmall box design with a vintage-style œletterbox front panel.
The Astoria front panel has a stylish contemporary aesthetic: brushed aluminum, with quality switches and indicators. Combos and heads have a quality strap carry handle and color-coded, vintage-style œPlexiglas Marshall logo badge inspired by the rare oxblood logo badge used for a short time in the mid 1960s.
The three models are covered with colored vinyl: Blue for Dual, Red for Custom and Green for Classic all with a striking cream colored central stripe. The Astoria 1×12 speaker cabinet is available in each color to match.
FEATURES
Power: 30W (tube)
Tubes: four 12AX7 (preamp); two KT66 (power amp)
Power reduction control
Two channels
Two inputs: Lo and Hi sensitivity
Speaker: 1×12″ Celestion G12H-75 Creamback
Controls: master volume, channel volume, 3-band EQ, gain, body switch, edge control
Footswitchable FX loop
Footswitch included
Contemporary hand-wired design
Made in the U.K.
Dustcover included
Weight
30.00 kg
Reviews
There are no reviews yet.
Be the first to review “MARSHALL AST3C Tube guitar amplifier 30W” Cancel reply
A two-channel, two-tone, hand-wired Marshall combo that works everywhere.
The Marshall Astoria Dual 30W tube combo is an original two-channel design. Via the 1x12 in. 75W Celestion Creamback, the clean channel ranges from brilliant clean sounds to classic Marshall crunch, and the overdrive channel takes over from there offering plenty of gain and tone for heavier riffs and solos.
As well as having the consistent Edge and Power Reduction features, this model also has a Body switch to broaden low end frequencies, as well as a Master volume.
On the rear panel of the Astoria Dual is a footswitchable FX loop with Send, Return and Level controls. If unused, the Level control can be used as a volume boost.
The Astoria Series is about pure, unfettered vintage tone”from loud, unbroken clean to sublime saturation. Built for the connoisseur using precision point-to-point hand-wiring, Astoria is for the serious guitarist who craves authentic tone, but who also wants contemporary features. Astoria offers, across the series, footswitchable features such as: valve-driven FX Loop with independent level control, +20dB gain boost and dual channels, as well as tonal switching and modern power reduction.
To achieve the innovative marriage of authentic tonal character and contemporary features, the Astoria Series uses turrets mounted on the PCB, allowing the hand-wiring and more complex switching circuitry to elegantly coexist on a single board. Please note: ALL of Astoria\' tonal circuitry is point-to-point hand wired for quality and authenticity of tone.
Astoria\' all-tube heart consists of 12AX7 in the preamp, GZ34 rectification and KT66 output stage, which is cathode biased and has no negative feedback.
The output and mains transformers are designed specifically for Astoria, and some of Astoria\' pots use specially selected log tapers to be more balanced across their effective ranges.
Astoria also features Hi & Lo inputs, with the Hi input providing an extra 6dB of sensitivity”a characteristic of many classic, vintage amplifiers.
All three Astoria models are expertly crafted and are designed, engineered and constructed to the highest standards at the Marshall factory in Bletchley, England.
The Look The Astoria Series look is unique, with a quirky œboutique flavor. The Astoria combos have their control panel on top of the cabinet, like vintage Marshall combos, with the Astoria heads being œsmall box design with a vintage-style œletterbox front panel.
The Astoria front panel has a stylish contemporary aesthetic: brushed aluminum, with quality switches and indicators. Combos and heads have a quality strap carry handle and color-coded, vintage-style œPlexiglas Marshall logo badge inspired by the rare oxblood logo badge used for a short time in the mid 1960s.
The three models are covered with colored vinyl: Blue for Dual, Red for Custom and Green for Classic all with a striking cream colored central stripe. The Astoria 1x12 speaker cabinet is available in each color to match.
FEATURES
Power: 30W (tube)
Tubes: four 12AX7 (preamp); two KT66 (power amp)
Power reduction control
Two channels
Two inputs: Lo and Hi sensitivity
Speaker: 1x12" Celestion G12H-75 Creamback
Controls: master volume, channel volume, 3-band EQ, gain, body switch, edge control
Footswitchable FX loop
Footswitch included
Contemporary hand-wired design
Made in the U.K.
Dustcover included
Vox AD50VT 50W Guitar Amplifier
Number of amp types: 11 Number of effects: 11, Noise reduction: 1 Number of programs: 11 preset, 2 channel. Input/output jacks: Top panel ??? 1 x INPUT. Rear panel ??? 1 x FOOT SW , 1 x LINE/ PHONE, (AD100VT, AD50VT & AD50VT121 only) 1 x EXTERNAL SPEAKER OUT, (AD100VT only) 1 x LOOP RETURN Jack 1 x LOOP SEND Jack. Power amp output:AD100VT = maximum 100 RMS @ 8 ohms, AD50VT(212) = maximum 50W RMS @ 8 ohms AD30VT = maximum 30W RMS @ 8 ohms, AD15VT = maximum 15W RMS @ 8 ohms. Adjustable Output Wattage (AD100VT, 50VT, 50VT-212, 30VT). Speaker: AD100VT = 2 x 12 inch VOX oringinal 16 ohm, AD50VT-212 = 2 x 12 inch VOX oringinal 16 ohm AD50VT = 1x Celestion 70/80 (12 inch 8 ohm), AD30VT = 1x VOX original (10 inch 8 ohm), AD15VT = 1x VOX original (8 inch 8 ohm), Signal processing A/D conversion: 24-bit, D/A conversion: 24-bit, Sampling frequency: 44.1 kHz . Power supply requirements: AC, local voltage. Power consumption: AD100VT=100W, AD50VT(212)=52W, AD30VT=45W, AD15VT=23W Dimensions: AD100VT = 55.3cms (21.77“) (H) x 68.4cms (26.93“) (W) x 26.8cms (10.55“) (D), AD50VT-212 = 48.5cms (19.09“) (H) x 67.3cms (26.50“) (W) x 26.5cms (10.43“) (D), AD50VT = 50.67cms (19.95“) (H) x 57.81cms (22.76“) (W) x 26.5cms (10.43“) (D), AD30VT = 43cms (16.93“) (H) x 45.59cms (17.95“) (W) x 22.40 cms (8.82“) (D), AD15VT = 39.5cms (15.55“) (H) x 42.8cms (16.85“) (W) x 22.4cms (8.82“) (D) Weight: AD100VT = 29kg (63.93lbs), AD50VT-212 = 23kg (50.71lbs), AD50VT = 20kgs (44.09lbs) AD30VT = 12kgs (26.46lbs), AD15VT = 10kgs (22.05lbs) . Included items: power cable . Options (sold separately): VFS2 dual foot switch.
Spider Jam™ gives you hundreds of coveted guitar sounds, sound-on-sound looping and the best band in the world right at your fingertips!A member of the infamous Spider™ III family, Spider Jam shares some popular family jewels like 200+ artist-created presets, 150+ song-based presets, 12 Line 6 original amp models and seven Smart Control FX, including reverb and delay.
Itʼs full of fan favorites but Spider Jam also features some new, unique characteristics-like over 100 ribcage-rattling Endless Jam tracks and drum loops played by LA and Nashvilleʼs top session musicians slamming the drums, thumping the bass and hacking away at guitars. These arenʼt robotic, computer-generated jam tracks — youʼll feel your pulse racing while youʼre jamming with top players in killer tunes that explode out of the speaker in vivid, uncompressed audio. Play for days over the Endless Jams and, with sound-on-sound loop recording, save your scorching solos right into Spider Jam.
Cooking at 75 watts, Spider Jam offers rhythm-section chemistry, hundreds of amazing guitar tones and all your recorded creations pushed out of a 12' Celestion® Custom speaker and a 2' tweeter — this thingʼs got so much bang for your buck we should issue it with a health warning.Spider Jam™ gives you hundreds of coveted guitar sounds, sound-on-sound looping and the best band in the world right at your fingertips.
A member of the infamous Spider™ III family, Spider Jam shares some popular family jewels like 200+ artist-created presets, 150+ song-based presets, 12 Line 6 original amp models and seven Smart Control FX, including reverb and delay. Itʼs full of fan favorites but Spider Jam also features some new, unique characteristics-like over 100 ribcage-rattling Endless Jam tracks and drum loops played by LA and Nashvilleʼs top session musicians slamming the drums, thumping the bass and hacking away at guitars.
These arenʼt robotic, computer-generated jam tracks — youʼll feel your pulse racing while youʼre jamming with top players in killer tunes that explode out of the speaker in vivid, uncompressed audio. Play for days over the Endless Jams and, with sound-on-sound loop recording, save your scorching solos right into Spider Jam.
Cooking at 75 watts, Spider Jam offers rhythm-section chemistry, hundreds of amazing guitar tones and all your recorded creations pushed out of a 12' Celestion® Custom speaker and a 2' tweeter — this thingʼs got so much bang for your buck we should issue it with a health warning.Spider Jam™ comes pre-loaded with the tones that made the Spider III family so popular: 200+ artist-based presets, 150+ song-based presets and 12 fully adjustable Line 6 original amp models.
Power: 75 Watts
Power: 75 Watts
Effects: Υes
Speaker: 12'' Custom Celestion
Effect: 12 Custom Amp Models - 7 Effects
Speaker: 1 x 12''
Modeling Technology: Nai
Sounds: +200 Artist presets, +150 song-based presets
Modeling Technology: Yes
Tuner: Υes
Channels: -
Equalizer: Yes - 3 band
Ηeadphones: Υes
FX Loop: No
Outs: 1/4'' headphones out / Direct Out, RCA outputs
Inputs: Mini jack, XLR Mic, Jack 1/4''
Lamps: No
Tuner: Yes / Chromatic
Tubes: -
Controls: Amp Models, Drive, Eq, Channel Volume, FX, Reverb, Master
Footswitch: Not included / Compatible FBV Express, FBV Shortboard
FX Loop: -
Dimensions ( W x H x D ): -
Weight: -
MINI GUITAR AMP MARSHALL MS-2
1" Speaker, 2 Watts
Volume Tone Control.
Channel Switch (clean/overdrive).
Headphone Out.
Colour: Black.
Power Supply: 9V Battery or AC adaptor (not included).
Dimensions:
Width: 110 mm
Depth: 60 mm
Height: 140 mm
Weight: 0.34kg
Hand-built and hand-wired 120-Watt Class A/B amplifier driven by 4 x 6L6 tubes (now fully compatible with EL34 and 5881, etc.)
2 original 12" BUGERA guitar speakers optimized for tight low-end and modern-vintage mids
Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 valves for boutique clean and face-melting hi-gain tone
Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
Revolutionary INFINIUM Tube Life Multiplier technology:
Extends the life of your amplifierʼs expensive power valves up to 20 times.
Provides incredible reliability and consistent tone over the complete lifespan of your valves
No need for expensive matched valve sets
Allows you to mix and match any combination of compatible valve types and brands
Monitors performance of each power tube continuously and displays defective valves to allow for easy and individual replacement
Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
Power amp damping switchable (High, Medium, Low) for total sound control
Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
Line output with dedicated Level control
Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
High-quality components and exceptionally rugged constructionensure long life
The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.
Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.