| Content | This 20W combo is designed for those that like expression through innovation. Using a Celestion V type speaker the Origin20CTM provides a classic all-valve Marshall tone. A 2-way footswitch allows you to control the gain boost and turn the FX loop on and off. With classic styling and modern features this amp generates rich, harmonic tones so that you can craft a sound to suit your personality.
Our new power reducing technology, PowerstemTM, allows you to have high, medium or low power modes to suit your environment, from playing small venues to playing in your bedroom.
It may only have one channel but don’t underestimate it. By using the tilt control you can blend the voice between the normal tone and a high treble tone.
Using the footswitchable gain boost feature you can add that extra level of gain to generate a more overdriven tone.
There are lots of features on the Origin so we've made some videos to help you better understand how the Origin can help shape your sound.
General
Model
Origin20C
Range
Origin
Technology
Valve
Channels
1
Electronics
Output wattage
High power 20W, mid power approx 3W and low power approx 0.5W
Outputs
Speaker outputs: 3 x 1/4" jack sockets (16Ω load / 8Ω load), DI out (1/4" jack)
Inputs
1 x 1/4" jack instrument input, footswitch
Controls
Gain, boost, tilt, bass, middle, treble, master, presence, powerstem
Effects
None
Effects loop
Yes, Series, Send/Return
Speakers
Speaker configuration
1x10“
Speaker model
Celestion V type (16Ω, 50W)
Unit impedance
16Ω
Valves
Preamp valves
3 x ECC83
Power amp valves
2 x EL34
Accessories
Footswitch
PEDL-90016 included
Cable
Detachable power cable included
Dimensions (including feet and handle)
Weight
13.9 kg / 31 lbs
Width
520 mm / 20.5“
Height
440 mm / 17.3“
Depth
240 mm / 9.4“ |
- 30-watt, 2x12" combo guitar amplifier
- Two channels with independent volume controls — Normal and Top Boost
- Reverb and Tremolo effects onboard (controllable via optional footswitch)
- Master volume section with Tone Cut and Volume controls
- True bypass effects loop for bringing in your own pedals
- Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
- 16-ohm output jack for running a cabinet along with the internal speakers
- Features two 12" 8-ohm Celestion Alnico Blue speakers
- Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
- Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
- Weight: 73.59 lbs.
|
AC30HW2 hand-wired combo amp; two Celestion G12M Greenback speakers
The VOX Hand-Wired Series - turret board construction and hand-wiring make this the ultimate amp, with rich versatile voicing and a classic powerful sound.
Key Features and Product Highlights
- Hand-wired turret board construction
- Birch-ply cabinets featuring solid bracing and a natural high frequency diffuser
- ECC83/12AX7 preamp tubes (x3)
- Fitted with matched Ruby Tubes that provide extended dynamic range
- Traditional VOX two-channel design.
- Top Boost and Normal. High and Low inputs for each channel
- The Normal channel provides an additional BRIGHT switch.
- The top boost channel provides a HOT/COOL switch to achieve even more gain
- Master Volume/BYPASS switch completely bypasses the Master Volume section
- OP mode switch cut the amp's Output Power level in half
- Vintage fawn-colored vinyl, reminiscent of the 1960 classic AC30
- Choose either Celestion Alnico Blue or Celestion G12M Greenback
- VFS1 footswitch controlls the Top Boost channel's HOT/COOL switch
- A premium, custom-fit dust cover is included with every model
Output Power: 30 Watts RMS into 8/16 Ohms
Tube Complement: Preamp: ECC83/12AX7 (x3), Power amp: EL84 (x4), Rectifier: GZ34
Speakers: 12" Celestion G12M Green Back (x2); 8 Ohm
Inputs:
NORMAL Channel Jacks: HIGH (x1); LOW (x1)
TOP BOOST Channel Jacks: HIGH (x1); LOW (x1)
FOOT SWITCH Jack
Outputs: POWER OUTPUT Jacks (x2 for external/extension speakers)
Dimensions (W x D x H): 705 x 260 x 550 mm / 27.76 x 10.24 x 21.65 inches
Weight: 30.8 kg / 67.9 lbs.
Included items: Power cable, VFS1 footswitch, Dust cover
| The MS-4 is the ultimate in portable battery/mains adapter operated micro amps, packing a full 4 Watt of Marshall tone into a tiny case. This mighty micro Marshall half-stack has switchable Clean and Overdrive modes. A single Tone control provides full focus of bass to treble.
Technical Info
Dimensions (H x W x D): 26 x 11 x 6cm
Finished in traditional Marshall black
White logo
Gold panel
Power Supply: 9V Battery or AC adaptor (not included).
Headphone Out. |
Marshall 1962 Bluesbreaker Combo Guitar Amplifier
Used by Clapton during his stint with Mayall's Bluesbreakers. It's a JTM45 in combo form with a footswitchable tremolo. It produces a gutsy bass and vibrant top, coupled with an overall natural warmth. 45W. Dimensions: 740x600x235 mm. Weight: 30.2 Kg.
|
From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:
100W power
All-valve, with 5 x ECC83s, and 4 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes (clean,crunch & overdrive)
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England
|
Reviews
There are no reviews yet.