MARTIN 2510 DMX Playback-Controller Lighting Controller

Discontinued

209.56 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Discontinued Discontinued SKU: 2510 DMX Playback-Controller Category:
Powerful Playback Controller for an easy and inexpensive hardware based control solution. This powerful yet small playback controller handles all Martin lighting products. By combining individual scenes into sequences, the 2510 allows you to build a comprehensive Martin lightshow with a minimum of effort. A standard serial input enables you to download lighting programs from […]

 

Read more

Powerful Playback Controller for an easy and inexpensive hardware based control solution.

This powerful yet small playback controller handles all Martin lighting products. By combining individual scenes into sequences, the 2510 allows you to build a comprehensive Martin lightshow with a minimum of effort. A standard serial input enables you to download lighting programs from the Martin LightJockey or ProScenium controller.

The 2510 offers fully automatic operation and steps through memory sequences with no other prompting other than the internal clock or an external music signal. Manual mode allows for easy operation and a blackout function provides for even more extensive control.

Features:
Record up to 512 DMX channels from LightJockey
Easy playback with manual selection of sequences
Up to 10 sub-lists of sequences
Music input for triggering scenes
Blackout function

Weight 1.50 kg

Reviews

There are no reviews yet.

Be the first to review “MARTIN 2510 DMX Playback-Controller Lighting Controller”

Your email address will not be published. Required fields are marked *

Quick Comparison

MARTIN 2510 DMX Playback-Controller Lighting Controller removeARTSOUND WD216RGB Led Touch Controller RGB 216 Watt removeMARTIN MAXXYZ Playback Module Extension - MAXXYZ Console removeLITE PUTER TX-1201 Touchpanel DEMO new removePANGOLIN FB3QS Laser Interface Hi-Speed Bus Powered USB2.0 removeArtlight LT-8040 DMX512 Led Controller Decoder 4 Channels 768W remove
NameMARTIN 2510 DMX Playback-Controller Lighting Controller removeARTSOUND WD216RGB Led Touch Controller RGB 216 Watt removeMARTIN MAXXYZ Playback Module Extension - MAXXYZ Console removeLITE PUTER TX-1201 Touchpanel DEMO new removePANGOLIN FB3QS Laser Interface Hi-Speed Bus Powered USB2.0 removeArtlight LT-8040 DMX512 Led Controller Decoder 4 Channels 768W remove
Imageled rgb controller touch wirelessFB3qs pangolin laser interfaceArtlight DMX512 Decoder
SKU2510 DMX Playback-ControllerWD216RGBMAXXYZ EXTTX1201FB3QSLT-8040
Rating
Price209.56 incl. GR VAT 14.88 incl. GR VAT5,028.25 incl. GR VAT 124.00 incl. GR VAT558.00 incl. GR VAT34.71 incl. GR VAT
Stock

Only 1 left in stock

In stock (can be backordered)

Available on backorder

Only 1 left in stock

Only 1 left in stock

Only 5 left in stock (can be backordered)

AvailabilityOnly 1 left in stockIn stock (can be backordered)Available on backorderOnly 1 left in stockOnly 1 left in stockOnly 5 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Type: DMX512
  • Power: 288/576W
  • Voltage: 12/24V
Ιncluded 2 plugs
ContentPowerful Playback Controller for an easy and inexpensive hardware based control solution. This powerful yet small playback controller handles all Martin lighting products. By combining individual scenes into sequences, the 2510 allows you to build a comprehensive Martin lightshow with a minimum of effort. A standard serial input enables you to download lighting programs from the Martin LightJockey or ProScenium controller. The 2510 offers fully automatic operation and steps through memory sequences with no other prompting other than the internal clock or an external music signal. Manual mode allows for easy operation and a blackout function provides for even more extensive control. Features: Record up to 512 DMX channels from LightJockey Easy playback with manual selection of sequences Up to 10 sub-lists of sequences Music input for triggering scenes Blackout functionThe Touch! wireless RGB LED Controller is our most advanced and easiest to use RGB LED controller. With this controller, you can use the touch wireless remote to control your RGB LED fixtures, providing full color and brightness control. Simply connect this unit to your RGB LED fixtures and a power supply, grab the remote control, and start controlling your fixture. Choose any color output using the touchwheel on the remote control, or choose from 11 pre-programmed scenes. The RGB Touch Controller is a colour-change control system for LED lighting. It features the latest in capacitance and wireless touch technology, to ensure an increased lifespan and reliability by eliminating the mechanical wear associated with physical buttons. The wireless range of the kit is approx 20m and incorporates a new PWM control technology to eliminate the flicker between colour changes. Many features come as standard including multi-type memory functions for colour, modes, speed and brightness/dimming. The kit comes boxed and complete with user manual, simple-to-install input/output receiver and capacitive-touch, colour wheel handheld controller.   Technical parameters: Controller: Working temperature:-30℃~+60℃ Supply Voltage:DC5V/DC 12V-24V, Output:3 channels N-MOS Drain open output Connection mode:common anode Static power consumption:<0.5W Output current: 6A*3Ch=18A 6A(Each channel) controller dimension::L83 Χ W79 Χ H33 mm Package size:L205ΧW135ΧH45mm Net Weight:168g Gross Weight:392g Remote Control: Working temperature:-30℃~+60℃ Power supply mode:2pcs NO.7 Battery Supply voltage:3V Static power consumption:<0.09mW Static current:10uA Operating current:15mA Remote-controlled distance:>20M Stand-by time:6 months External dimension:   Remote control Function instruction:     changing models are as below: Connection Instruction: DC+: For power input +(power supply voltage12v-24v) DC-:   For power input - V+:      For Load Common anode R/CH1: Load output Red channel G/CH2: Load output Green channel B/CH3: Load output Blue channel Power:   Red indicating light is for power light,when the power on it will be turn on. Receiver: Green indicating light, normally it will be in the state of OFF,it will be twinkle when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be twinkle in a Fixed frequency to indicate the user. Typical Applications: Notes: 1. The use of power and load voltage, current, power must be consistent with the product. 2. Please make the connection like the diagram above(to connect the load wire first, than to connect with the power),In the process of operation please avoid short circuit. 3. This product warranty is 24 month,But not including the damage by people and other reason caused by over load working.

 

The Maxxyz Wing System can be placed on the left or right side of the main console. Multiple Wings can be placed on both sides of the main console, to give you the ultimate customized solution to your show. Use of multiple Wings is simple, as each is connected to each other, and simply linked together for further functionality.   

    * Modular design for future expansion
    * Full playback capabilities, identical in layout to Maxxyz console
    * LCD buttons with customizable text
    * Motorized faders
    * Easily connects to Maxxyz or Maxxyz PC via USB
    * Smart design allows for operation left or right of the main console
    * Sturdy and robust construction

 

pdfUser's manual

12-channel DMX-Touchpanel

  • Can be used as DMX-controller or analog lighting controller
  • 12 controllable channels
  • Flash and hold-sensors per channel
  • 3 zones with 4 channels
  • 4 chaser-patterns with 12 steps each for every zone
  • Chaser-control either automatically or programmable
  • Chaser-speed controllable via speed-control
  • 12 programmable scenes with 12 steps
  • Scenes can be called up individually, as sequence or altogether
  • Black-out button (Blank)
  • LED-display of all modes
  • DMX-output via 5-pin XLR-plug
  • 0/10 V-channel outputs via 15-pin Sub D-plug
  • Power supply via power unit
  • 19“-dimensions with 2 units

Specifications

  • power supply: 15Vdc (adapter not included)
  • dimensions: 482 x 88 x 69.5mm
  • weight: 1.8kg

General

FB3QS Hardware – Features

  • Easy to use USB to ILDA interface
  • Support for up to 120K scan speeds
  • Support for 6-color channels

QuickShow Software – Features

Powerful, Affordable and Easy to Use, QuickShow is a FREE laser show software, providing all the tools you need to create both “live” and pre-programmed laser shows. QuickShow is included with any Pangolin FB3QS or FB4 hardware purchase. Check out some of QuickShow’s most popular features below.

Live Controls

Perform live laser shows with ease. QuickShow has a full live control panel, making it easy to run live laser shows to the beat of the music. And it is compatible with both MIDI and DMX, so that you can run the software from a console. We also have a built in map for the popular Akai APC MINI, for a truly plug-and play live experience.

Timeline Shows

If you prefer to run pre-programmed timeline based laser shows, QuickShow offers a full suite of timeline based programming tools. And you can also set your own audio files, for perfect synchronization of lasers and music.

Laser Beams, Text, Graphics and Logos

With our popular QuickTools, you can create your own custom laser beam effects, text, graphics, and laser logos with ease. No complex programming required.

Drawing Program and Frame Editor

Our innovative drawing program and frame editor allow you to draw any sort of laser imagery or content you can imagine. And with professional, but easy to use tools, you can dial in your content with incredible precision and accuracy.

DMX and MIDI compatible

QuickShow software is compatible with both DMX and MIDI. And we provide a custom profile for the popular Akai APC MINI console, making for a truly plug and play experience.

Effect Generator

With our powerful effect generator, you can also apply custom effects to any laser content you create, including laser beam effects, text, graphics and laser logos.

Abstract Generator

If you love creating laser abstracts, you will love QuickShow. We include a powerful abstract content generator allowing you to develop your own custom abstract content.

BPM SYNC

Inside of QuickShow, we have a powerful yet easy to use BPM sync tool, perfect for live laser shows. We also have a FREE plugin for the popular Virtual DJ software, allowing you to automatically sync your laser show, with music. Synchronizing lasers and music in perfect time, has never been easier.

Auto-Play (Virtual Laser Jockey)

If you want to run your shows automatically, without being at the control station, this is no problem with QuickShow. Our innovative Virtual Laser Jockey Feature can run the show for you, triggering cues and content for you automatically, based on a set BPM you decide.

Easily Control Multiple Lasers

QuickShow provides our popular “zones” feature, which allows you to easily control multiple laser projectors, at the same time. And you can choose from independent or shared control, as you see fit.

Geometric Correction Tools

We include precise geometric correction tools with QuickShow, allowing you to dial in your projection areas. You also have control of your X, Y, and Z axis, as well as size, position, rotation and more.

High Definition Output and Scan Speed Support

The QuickShow software and FB3QS/FB4 hardware were designed to help improve the output from your laser projector. Giving you high-definition looking laser effects. In addition, the software supports high-speed scanners, inside of professional laser projectors. So no matter what laser projector you are using, QuickShow can help optimize this.

Preview Tools

QuickShow provides you with a convenient on-screen preview, of all laser content you are running. You can also see the content as it is sent, to each individual laser you are controlling.

FREE UPDATES for Life

As we develop new features for QuickShow, and continually update the software, these will be made available to you absolutely FREE of charge.

Weight and dimensions including packaging

  • Weight (incl. packaging) 500 gr
  • Dimensions (incl. packaging) 24.5 x 15.0 x 6.0 cm
- extensive laser software - delivered including USB-ILDA interface - software-demo can be used separately from the interface, prepare your shows at home! - equipped with configuration wizard for starters - supports 3-colour lasers (like full-colour RGB) - 12-bit X/Y resolution - 30 different laser zones can be set for a maximum of 9 projectors - approximately 2,000 different pre-programmed beams and figures - various tools to design texts, figures and effects yourself - live adjustment of size, rotation, position, projection angle, colour and scan speed - support for timeline-programming for music-synchronised shows - manual activation BPM counter to activate music-controlled shows - on-screen preview of graphic elements via Windows OpenGL - on-screen background work mode, to prepare texts and animations live without output - autotrace bitmap option: convert JPG, GIF or BMP files directly into patterns - DMX support for activation cues via DMX - MIDI-in support for activation cues via MIDI - interface optimised for use with touchscreen - Custom Effects option, add more effects to a timeline, cue, pattern or program - projector correction and zone control, to project cues and effects in certain zones Contents box: - Quickshow software - 2,000 pre-programmed presets cues manual - Flashback 3 USB to ILDA adaptor (interface) - connector USB: USB B - connector ILDA: D-sub 25-pins - dimensions interface: 110 x 71 x 33 mm - USB cable (USB A to USB B) Minimum system requirements: - PC or notebook - Intel Centrino Duo, Core 2 Duo or equal (AMD) processor - 2 GB internal memory - Windows XP, Vista or 7 - screen resolution: minimum 1,024 x 768 - 1x USB port Minimum projector requirements: - ILDA-compatible laser - laser with scanner system between 10,000 and 60,000 pps - every colour possible, maximum of 3 colours (full-colour RGB) - compatible with analogue and TTL-based systems
  • Product Features: This DMX512 encoder options the advanced micro control unit, It can receive the DMX512 standard digital control signal which is internationally widely used It changes the signal into PWM control signal to actuate the LED lamp It can also connect the DMA digital console to change the light or each dynamic effect In addition, when the decoder is not connected with the DMA console, it can be used as a synchronous controller That is to say you can Synchronously control number of decoders and LED lights
    Basic parameters: Basic parameters Product Name: DMX512 Decoder Supply voltage: DC12-24V Output channels: 3 channels (R, G, B, ) or 4 channels (R, G, B, W ) Output current: Max.8A Per Channel Output Power 1:12V:<288W, 24V:<576W (3 channels) Output Power 2:12V:<384W, 24V:<768W (4 channels) Operating temperature: -20-60C Controller size: L166*W67*H41(mm) Box size: L176*W84*H50(mm) Net weight: 360g Gross weight: 408g DMX512 standard: DMX512/1990 Control mode: button control, 512 console control Accessories: A pair of XLR plugs
    Package List: 1 * DMX Decoder 1 * Male and female XLR connectors 1 * User manual
Weight1.50 kg0.3 kg4.00 kg2.00 kg0.5 kg0.5 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.50 kg
Weight 0.3 kg
Weight 4.00 kg
Weight 2.00 kg
Weight 0.5 kg
Weight 0.5 kg