Content | PRICE DOES NOT INCLUDE VAT
Martin Audio EX2
Loudspeaker system controller.
Equaliser/crossover processor for CX2 and/or BX2 speakers.
Inputs: Left & Right balanced XLR or ¼" jack
Outputs: Left & Right & (mono) sub ¼" jacks.
Physical: 1u standard 19" rackmount.
Power requirements: 220-240V AC 50Hz |
PRICE DOES NOT INCLUDE VAT
Gepco Passive D.I. Box-2nd Hand-
|
PRICE DOES NOT INCLUDE VAT
Art + Science = Magic
The Engineering Group at TC Electronic were given carte blanche to create the optimal studio
signal processor. Being musicians and studio engineers themselves, they know what is important
and have a feel for what you are looking for. Working on the borderline between art and science,
they created the M2000.
Designed for the artist within you, you will create magic when using the M2000.
Main features
Magic
The M2000 provides you with a broad palette of high quality effects enabling you to
create magical effects. The true dual engine configuration allows you to run two full-
blown effects simultaneously, i.e. on two individual effects sends. The effects have
been developed for optimal sonic quality with no compromises made. This has only
been possible because our engineers succeeded in combining the latest technology
with TC's powerful DARC? chip.
Ultimate User-Interface
The user-friendly TC feature, the Recall Wizard, instantly finds the preset that suits
your need in any situation. You simply enter your preferences, such as gentle reverb
for vocal, or extra pitch for guitar and the Wizard serves you a short list of presets ready
to compare and use.
Uncompromising Effects
The M2000 gives you access to a stunning array of Reverb, Pitch-shifting, Delays, Chorus,
Dynamics etc. Among the included reverbs you?ll find the unique Co-efficient Optimized
Room Emulator or C.O.R.E. Reverb? based upon TC?s famous reverberation Technology.
Another unique feature in the M2000 is the Dynamic Morphing. This function enables you to
apply e.g. Chorus to a vocal at low volume levels, while the same effect is being morphed into
flanging at high levels giving the signal a totally new dynamic dimension.
The Sensation
The M2000 is fully prepared for the digital age with Digital I/O connectors, S/PDIF and the
professional format AES/EBU. However, specifications never tell the whole story. What really
matters is how your final mix sounds. This is where TC?s long experience and know-how in high-end
studio signal processing becomes important.
More Features
250 factory presets, including Delay, Reverb, Ambience, Pitch, Dynamics, EQ + more.
True stereo Twin Engine processing with six different routings available.
Dynamic Morphing? and Patch Glide with adjustable glide times.
20bit Analog Conversion (105dB Dynamic Range A to D): 10Hz-20Khz bandwidth
AES/EBU (24bit) and SPDIF (24bit) digital I/O. + 16bit dithering tool for DAT output.
Wizard Help menus assist user in preset choices on an easy to read scrolling bit-mapped display.
Tap tempo and MIDI tempo Delay presets. Tap tempo button and footswitch jack.
Both 128 user and 128 Combi-user presets + 4 snapshot memories.
Universal auto-switching power supply (100-240V.)
|
PRICE WITHOUT V.A.T. 23%
| PRICE DOES NOT INCLUDE VAT
Features
Advanced Hardware for Superior Sound
The latest 20-bit analog-to-digital and digital-to-analog conversion technology-sampling at 44.1kHz. Frequency response extends all the way from 20 Hz to 20 kHz; dynamic range is an extraordinary 106dB; noise and distortion are neglible.
Stereo Configuration with Balanced Inputs and Outputs
A true 2-in/2-out stereo configuration that allows stereo sources to be processed without disrupting the original stereo image. Stereo inputs and outputs are all electronically balanced, with XLR and TRS phone jack connectors.
Preset, Internal, and Card Memory
180 memory locations "on board“. 80 of these are read-only memory. The remaining 100 are writable memory locations. Plug-in memory cards hold an extra 100 effect programs each.
Three-stage Effect Configuration
In addition to the main effects, the SPX990 provides programmable pre and post effects that can be used to refine and polish your sound.
In-depth Programming Power
The SPX990 has 4 programmable pre effects, 36 programmable main effects, and 3 programmable post effects.
Tempo-based Delay Time Programming
Delay time parameters can be programmed in terms of tempo or note length. Delay time can also be entered via a footswitch or MIDI clock data.
Superior Pitch Precision
The SPX990 achieves faultless pitch tracking through a new dynamic waveform analysis technique. In addition to the simple parallel pitch tracking the SPX990's "intelligent" pitch change creates appropriate harmony based on a specified key and scale type.
External Parameter Control
The SPX990 allows two selected parameters from each program to be assigned to two external MIDI controllers.
MIDI Control
The SPX990 allows MIDI selection of all programs, and real-time control of up to two selected effect parameters at the same time.
4 Pre-Effects
1. 3-band PEQ *1, 2. Compressor *1, 3. Harmonic Driver *1, 4. Compressor, Dist. and EQ *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT
36 Main Effects: Reverb, Early Reflections, Delay and Echo, Modulation
REVERB: Reverb *2, Filtered Reverb *2, Stereo Reverb *1, Echo Room *2; EARLY REFLECTIONS: Thin Early Reflection *2, Fat Early Reflection *2, Gate Reverb *2, Reverse Gate *2; DELAY and ECHO: Delay L, C, R *2, Echo *2, Multi Tap Delay *2, Stereo Echo *1, Tempo Mono Echo *2, Tempo Stereo Echo *1, Tempo Quad Echo *1; MODULATION: Flanger *1, Dual Flanger *1, FM Chorus *1, AM Chorus *1, Phaser *1, Symphonic *1 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT
Main Effects continued: Pitch Change, Pan, Complex Effects, Freeze
PITCH CHANGE: Mono Pitch Change *3, Dual Pitch Chance *2, Triple Pitch Chance *2, Stereo Pitch Change *1; PAN: Auto Pan *2, Triggered Pan *2; COMPLEX EFFECTS: Chorus and Reverb *2, Symphonic and Reverb *2, Flanger and Reverb *2, Reverb (L) / Reverb (R) *1, ER (L)/ Reverb (R) *1, Echo (L) / Reverb (R) *1, Chorus (L) / Reverb (R) *1, Pan (L) / Pan (R) *1; FREEZE: Freeze *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN - 1 OUT
3 Post Effects
1. 3-band PEQ *1; 2. Compressor *1, Harmonic Driver *1 *1 = 2 IN - 2 OUT
Specifications
Frequency Response |
20 Hz - 20kHz +/-0.5 dB |
CD Player
Dynamic Range |
Above 100 dB (typical 106dB) |
Specifications
Hum and Noise |
Below -82 dBm (Typical -88dBm) |
Distortion |
Below 0.005% at max. level 1 kHz |
Input/ Number of Channel |
2 (Phone Jack) |
Input/ Nominal Level |
+4/-20dBm (Switchable) |
Input/ Highest Input |
+24dBm (Switchable at +4dB) |
Input/ Impedance |
20 k ohm |
Output/ Number of Channel |
2 (Phone Jack) |
Output/ Nominal Level |
+4/-20dBm (Switchable) |
Output/ Highest Output |
+18dBm (Switchable at +4dB) |
Output/ Impedance |
150 ohm |
A/D Conversion |
20 bits |
D/A Conversion |
20 bits |
Sampling Freq. |
44.1kHz |
Preset Program |
1 - 80 |
User Memory Program |
1 - 99,00 |
Optional Memory Card |
1 - 99,00 |
Front Panel/ Control |
Input Level (L,R), Data Entry |
Front Panel/ Keys |
Function Key x 6, Page Select Key x 2, Memory, Store, Edit, Bypass |
Front Panel/ Display |
2 ch. 8 segment LED (Level Meter) 6 segment LED (Mode Indicator) 7 segment LED (Memory No.) Memory, Edit, Bypass indicators 24 chara x 2 Line LCD |
Front Panel/ Slot |
Memory Card |
Rear Panel/ Connectors |
Input L/R (XLR x 2, Phone jack x 2 Output L/R (XLR x 2, Phone jack x 2) MIDI In, Thru/Out (DIN 5P x 2) Trigger (Phone Jack x 1) Bypass or INC/DEC (Phone Jack x 1) |
Rear Panel/ Switch |
In/Out Level Switch (+4dB/ -20dB x 2) MIDI Thru/ Out Switch |
Power Requirements |
US and Canadian Models: 120V, 60Hz British Model:240V, 50Hz General Model:230V, 50Hz |
Power Consumption |
25W |
Dimensions |
480 x 46 x 324.4 mm |
(W x H x D) |
(18-7/8" x 1-13/16" x 12-3/4“) (including attachments) |
Weight |
4.6 kg (10lbs. 2oz) |
| Outline FSC1 Processor-2nd Hand-
FEATURING
Customized functions
FOC1 dedicated controller for Flyone loudspeaker system
SC1 dedicated controller for Spectra loudspeaker system
NC1 dedicated controller for Integra loudspeaker system
MEC1 dedicated controller for Media loudspeaker system
FSC1 dedicated controller for Formula Stack louds. System
TFC1 dedicated controller tor Topfly loudspeaker system
MRC1 dedicated controller for Road loudspeaker system
TLC1 : dedicated controller for Tripla loudspeaker system
Dynamically invariant filter transfer function
RMS limiters on each output
Subwoofer dedicated output
Adjustable band gain
Polarity inversion switches
Muting switches
DESCRIPTION
Designed with the most advanced audio technologies the Outline Controller Series are true professional active dedicated control units for some Outline loudspeaker system models. Developed to meet the most demanding requirements of the sound reinforcement applications, the Outline Controller Series provides nonstop operation with absolute stability and reliability. Only IEC approved components and parts are used in these active controllers and they are manufactured to satisfy and to be in according with safety objects stated for “electrical device” working within the limits of pertinent CE, European Community directive.
Based on a plugin filter card design, the Outline Controller Series allows the operation to those Outline loudspeaker systems that needs this kind of external assistance to perform of its best.
The Outline FOC1, SC1, MEC1, NC1 two ways with subbass output controllers, are designed for the Outline Flyone, Spectra, Media, Integra loudspeaker system.
The Outline FSC1, TFC1, MRC1, TLC1, three ways with subbass output are designed for the Outline FormulaStack, TopFly, RoadSystem, Tripla loudspeaker system.
All models have customized band splitting, filter transfer function and signal time alignment tailored to the loudspeaker system for which are designed.
All models have dynamic control with loudspeaker protection purposes, obtained with RMS limiters with adjustable threshold that are available on each output.
All models have a very low frequency output that can be used to drive the Outline Bass Series or Sub Series low frequency units.
All models have level control on each output, polarity inverters, muting switches, subsonic filters, RMS limiters and active balanced input and outputs with XLR connectors. Perspex security cover are included.
Dimensions of all models are 483mm width, 44mm height, 210mm depth.
SPECIFICATIONS
Product name:
Outline FOCI, SC1, NCI, MEC1, FSC1, TFC1, MRC1, TLC1
Product type: Dedicated active controller
Channels: 1
Ways:
FOCI: 2 ways + subwoofer
SC1: 2 ways + subwoofer
NCI: 2 ways + subwoofer
MEC1 : 2 ways + subwoofer
FSC1: 3 ways + subwoofer
TFC1: 3 ways + subwoofer
MRC1: 3 ways + subwoofer
TLC1: 3 ways + subwoofer
Crossover frequencies: fixed customized
Filter slope: fixed customized
Filter transfer function: fixed customized
Input impedance: 20 kΩ balanced
Frequency response: 20-20000 Hz ± 0.3 dB
Output impedance: 600Ω balanced
Total harmonic distortion (THD): <0.01%
Total intermodulation distortion (SMPTE): <0.01%
Signal to noise ratio: > 100dBA
Subsonic filter: Butterworth 18 Hz, 18 dB octave
Controls:
Front panel: Power on, output level, polarity, output mute, limiting threshold, input gain adjust
Rear panel switches: Balanced/unbalanced input and outputs, limiters on
Display:
Front panel: Power on, signal present, limiting action, input overloading
Connectors: XLR, Pin 1 ground, Pin 2 hot, Pin 3 cold
Power supply: AC from 100 -to 240V/50-60 Hz
Power consumption: 20W
Dimensions and net weight: Front panel Standard EIA 19" 1 U
483mm width, 44mm height, 210 mm depth, all models 3.3 net weight.
Dimensions volume and gross weight: all models, 55cm width, 8cm height, 30cm depth, volume 0.01 m3, 4.3 gross weight.
|
Reviews
There are no reviews yet.