MASTER AUDIO LSN18/4 – 18″ professional ferrite subwoofer 4Ω 800Wrms 97dB

207.50 incl. GR VAT

Only 2 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Professional subwoofer 460 mm., cloth edge, paper cone. – RMS power output: 800 watt – Impedance: 4 Ohm – Sensitivity: 97 dB – Frequency response: 35-2000 Hz – Magnet weight: 3.5kg – Voice coil diameter: 100 mm – Recessed diameter: 420 mm – Mounting depth: 195 mm PARAMETERS – Fs: 37 Hz – Qes: 0.39 […]

 

Read more

Professional subwoofer 460 mm., cloth edge, paper cone.

– RMS power output: 800 watt
– Impedance: 4 Ohm
– Sensitivity: 97 dB
– Frequency response: 35-2000 Hz
– Magnet weight: 3.5kg
– Voice coil diameter: 100 mm
– Recessed diameter: 420 mm
– Mounting depth: 195 mm

PARAMETERS

– Fs: 37 Hz
– Qes: 0.39
– Qms: 4.10
– Qts: 0.36

Weight 10 kg

Reviews

There are no reviews yet.

Be the first to review “MASTER AUDIO LSN18/4 – 18″ professional ferrite subwoofer 4Ω 800Wrms 97dB”

Your email address will not be published. Required fields are marked *

Quick Comparison

MASTER AUDIO LSN18/4 - 18" professional ferrite subwoofer 4Ω 800Wrms 97dB removeEMINENCE EOP18A Omega Pro-18 A 18" Speaker 800 W 8 Ohms - Alu Basket removeFaital Pro FP18HP1040A Speaker High Performance Series - 18" 8 Ohm 1000W removeB & C Speakers 18-NW100 Sub-Woofer Neodymium 18", 1000W,98dB removeFaital Pro FP18FH500A Speaker Five Hundred Series - 18" 8 Ohm 700W removeCELESTION T5460AWD WOOFER 18'' FTR18-4080FD PRO AUDIO 1000W remove
NameMASTER AUDIO LSN18/4 - 18" professional ferrite subwoofer 4Ω 800Wrms 97dB removeEMINENCE EOP18A Omega Pro-18 A 18" Speaker 800 W 8 Ohms - Alu Basket removeFaital Pro FP18HP1040A Speaker High Performance Series - 18" 8 Ohm 1000W removeB & C Speakers 18-NW100 Sub-Woofer Neodymium 18", 1000W,98dB removeFaital Pro FP18FH500A Speaker Five Hundred Series - 18" 8 Ohm 700W removeCELESTION T5460AWD WOOFER 18'' FTR18-4080FD PRO AUDIO 1000W remove
ImageEOP18A_omega eminence pro18 800w
SKULSN18/4EOP18AFP18HP1040A18-NW100FP18FH500AT5460
Rating
Price 207.50 incl. GR VAT 357.67 incl. GR VAT 414.99 incl. GR VAT 470.00 incl. GR VAT 364.42 incl. GR VAT 343.48 incl. GR VAT
Stock

Only 2 left in stock (can be backordered)

In stock

Available on backorder

Only 3 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityOnly 2 left in stock (can be backordered)In stockAvailable on backorderOnly 3 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentProfessional subwoofer 460 mm., cloth edge, paper cone. - RMS power output: 800 watt - Impedance: 4 Ohm - Sensitivity: 97 dB - Frequency response: 35-2000 Hz - Magnet weight: 3.5kg - Voice coil diameter: 100 mm - Recessed diameter: 420 mm - Mounting depth: 195 mm PARAMETERS - Fs: 37 Hz - Qes: 0.39 - Qms: 4.10 - Qts: 0.36OMEGA PRO-18A Professional Series Recommended for professional audio as a woofer in vented enclosures. Also ideal for horn loading and scoops.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
18 "
Nominal Diameter
457.2 mm
Voice Coil
4 "
Voice Coil
101.6 mm
Overall diameter
457.2 mm
Pitch Circle Diameter
438.2 mm
Cut- out Measurement
420.5 mm
Diameter of fixing holes
7.1 mm
Depth
207 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
800 W
maximum rated load
1600 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
40 - 800 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
25 Hz
Re (DC resistance)
5.2 Ohm(s)
Qms (mechanical quality)
8.18
Le (inductance of the voice coil)
1.67 mH
Qes (electrical quality)
0.32
Qts (overall quality)
0.31
Vas (equivalent volume)
548.7
Mms (moving mass)
138 g
BL (power factor)
18.8 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.29 mm/N
Sd (membrane area)
1159 cm²
Weight
12,14 kg
 

Nominal Specifications

    Nominal Diameter 18“, 460 mm
    Overall Diameter 18.11“, 460 mm
    Bolt Circle Diameter 17.32“, 440 mm
    Baffle Cutout Diameter 16.61“, 422 mm
    Depth 7.95“, 202 mm
    Flange and Gasket Thickness 0.55“, 13.9 mm


Electrical Specifications

    Minimum Impedance 6.6 Ohm
    Nominal Impedance 8 Ohm
    Nominal Power Handling*** 1,000 W
    Maximum Power Handling**** 2,000 W
    Sensitivity (1W/1m) 99 dB
    Frequency Range 38 - 2500 Hz
    Voice Coil Diameter 4“, 100 mm
    Winding Material Aluminium
    Former Material Glass Fiber
    Winding Depth 0.9“, 23 mm
    Magnetic Gap Depth 0.47“, 12 mm
    Flux Density 1.3 T


THIELE & SMALL Parameters

    Resonant Frequency (fs) 38 Hz
    DC Resistance (Re) 5.5 Ohm
    BL Product (BL) 24.5 N/A
    Diaphragm Mass inc. Airload (Mms) 163 grams
    Mechanical Compliance of Suspension (Cms) 0.11 mm/N
    Rms 4.42 Kg/s
    Electromagnetic Q (Qes) 0.35
    Mechanical Q (Qms) 8.75
    Total Q (Qts) 0.34
    Compliance Equivalent Volume (Vas) 7.37 ft³, 208.8 dm³
    Surface Area of Cone (Sd) 180.7“², 1,166 cm²
    Maximum Linear Excursion (Xmax)* 9.5 mm
    Xdamage** 17.5 mm
    Coil Inductance (Le) 1.36 mH
    Diaphragm mass (Mmd) 141 g
    Eta Zero 3.14 %

Notes

    *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    **Maximum excursion before permanent damage
    ***2 Hours Test According to AES 2-1984 Rev. 2003
    ****Maximum power is defined as 3dB greater than nominal power

2400 W continuous program power capacity 100 mm (4 in) copper voice coil 35 - 1000 Hz response 98 dB sensitivity FEA optimized Neodymium magnet assembly Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression

General

Product type Cone driver
Brand B&C Speakers
Reference 18NW100
Product code ALT18NW1008

Informations

Nominal impedance 8 ohm
Dimensional category 18 inch
Frequency coverage type Sub, Low
Manufacturer sensitivity 98 dB
Calculated sensitivity 96.29 dB
Nominal power handling 1200 W
Bandwidth 35÷1000 Hz

Fundamental parameters

Sd 1210 cm²
Mms 211 gr
Le 1.7 mH
Re 5.1 ohm
BL 28 T.m

Small signal parameters

Fs 31 Hz
Qes 0.27
Qms 4.2
Qts 0.26
Vas 252 L

Datas

Xmax ±9 mm
Calculated Xmax ±10.5 mm
EBP 115 Hz
Zmin 6.3 ohm
Fs / Qts 119 Hz
Vas * Qts² 17.04 L
Efficiency 2.7 %
Calculated efficiency 2.67 %
Weight ~9.3 kg
Recommended load volume 160 L
Fréquence d'accord liée à la charge 37 Hz

Dimensions

Voice coil diameter 4 inch
Winding depth 25 mm
Gap height 12 mm
Outside diameter 460 mm
Baffle cutout diameter 422 mm
Front thickness 16 mm
Depth after front 193 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Basket masterial Aluminium
Winding material Copper
Voice coil former Glass fiber
     

Nominal Diameter     460 mm (18 in)
Overall Diameter     460 mm (18.11 in)
Bolt Circle Diameter     440 mm (17.32 in)
Baffle Cutout Diameter     424 mm (16.7 in)
Depth     202 mm (7.95 in)
Flange and Gasket Thickness     13.9 mm (0.55 in)
Net Weight     4.7 Kg (10.4 lb)
Shipping Box
(Single Carton Box)     536x536x293 mm (21.1x21.1x11.5 in)
Shipping Weight     6 Kg (13.2 lb)

Nominal Impedance     8 Ohm
Minimum Impedance     6 Ohm
Nominal Power Handling ***     600 W
Maximum Power Handling ****     1200 W
Sensitivity (1W/1m)     99 dB
Frequency Range     30÷3150 Hz
Voice Coil Diameter     77 mm (3 in)
Winding Material     Cu
Former Material     Glass Fiber
Winding Depth     22 mm (0.87 in)
Magnetic Gap Depth     10.5 mm (0.41 in)
Flux Density     1.2 T

Fs     30 Hz
Re     5.1 Ohm
Qes     0.34
Qms     8.68
Qts     0.33
Vas     404.2 dm^3 (14.27 ft^3)
Sd     1166 cm^2 (180.7 in^2)
Xmax *     9.25 mm
Xdamage **     17.5 mm
Mms     134.3 g
Bl     19.5 N/A
Le     1.35 mH
Mmd     112.6 g
Cms     0.21 mm/N
Rms     2.91 Kg/s
Eta Zero     3.1 %
EBP     88 Hz
      

  • 1000Wrms continuous power handling (AES Standard)
  • Flexirol™ technology for greater excursion control
  • Double suspension for exceptional linearity at the highest excursions
  • Saturated gap technology for lower harmonic distortion
  • Extremely low frequency response, down to 30Hz
  • Smart chassis design minimises acoustic distortion
Nominal diameter (mm/in) 457/18
Power Rating (AES, W rms) 1000
Nominal impedance (Ω) 8
Voice coil diameter (mm/in) 100/4
Magnet type Ferrite
Magnet weight (kg/oz) 3.1/110
Chassis type Cast aluminium
Sensitivity (dB) 97
Frequency range (Hz) 30-2500
Coil material Round copper
Former material Glass fibre
Cone material Glass loaded paper with weather resistant impregnation
Surround material Cloth-sealed
Suspension Double
Xmax (mm/in) 6.0/0.24
Gap depth (mm/in) 10.0/0.39
Voice coil winding width (mm/in) 22.0/0.87
Small Signal Parameters
D (m/in) 0.38/14.96
Fs (Hz) 26
Mmt (g/oz) 172.42/6.08
Mmd (g/oz) 150.81/5.32
Mair -
Qms 4.33
Qes 0.29
Qts 0.27
Re (Ω) 5.39
Vas (lt/ft3) 395.56/13.96
BI (Tm) 22.88
Cms (mm/N) 0.22
Rms (kg/s) 6.506
Le (mH) 1.41
Mounting Information
Overall diameter (mm/in) 462/18.19
Overall depth (mm/in) 205/8.07
Cut-out diameter (mm/in) 416/16.38
Mounting slot dimensions (mm/in) 7 x 10/0.28 x 0.39
Number of mounting slots 8
Mounting slot PCD range (mm/in) 429-440/16.89-17.32
Unit weight (kg/lb) 9.8/21.6
Packed Dimensions and Weight
Single pack size W x D x H (mm/in) 500 x 500 x 240/19.7 x 19.7 x 9.4
Single pack weight (kg/lb) 11.6/25.6
Multipack (24) size W x D x H (mm/in) 1500 x 1000 x 980/59.1 x 39.4 x 38.6
Multipack (24) weight (kg/lb) 278/608
Weight10 kg11.25 kg6.10 kg8.00 kg6.00 kg9.80 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 10 kg
Weight 11.25 kg
Weight 6.10 kg
Weight 8.00 kg
Weight 6.00 kg
Weight 9.80 kg