| Content | 18″ professional ferrite subwoofer 8Ω 800Wrms 97d
LSN18/8 Professional Loudspeaker 18” paper cone with fabric reinforcement. With a power that reaches 800Watt RMS (1600Watt Max) and equipped with a 4" voice coil. With 8Ω resistance, frequency response 35 – 2000Hz and sensitivity 97dB. Easy installation as it has “Press Type” terminals.
Specifications:
Type: Professional Woofer
Diameter: 18” - 46cm
Paper Cone With Fabric Reinforcement
Terminals Press Type
RMS power: 800 Watts
MAX Power: 1600Watt
Resistance: 8Ω
Sensitivity: 97dB
Frequency Response: 35 – 2000Hz
Voice Coil Diameter: 100mm – 4”
Recess Diameter: 42cm
Magnet Weight: 125oz
Inserter depth: 19.5cm
Parameters:
Fs: 37Hz
Qes: 0.39
Qms: 4.10
Qts: 0.36
- Package: 1 piece each box |
- 95 dB Sensitivity 1 W / 1 m
- 1.200 W Power Handling
- 4" Copper Sandwich Voice Coil for low Power Compression
- Double treated Cone for Water Protection
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for high output Subwoofers
|
Nominal Specifications
Nominal Diameter 18“, 460 mm
Overall Diameter 18.11“, 460 mm
Bolt Circle Diameter 17.32“, 440 mm
Baffle Cutout Diameter 16.61“, 422 mm
Depth 7.65“, 194.3 mm
Flange and Gasket Thickness 0.55“, 13.9 mm
Electrical Specifications
Minimum Impedance 6.3 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 1200 W
Maximum Power Handling**** 2400 W
Sensitivity (1W/1m) 98 dB
Frequency Range 35 - 1600 Hz
Voice Coil Diameter 4“, 100 mm
Winding Material Kupfer
Former Material Glass Fiber
Winding Depth 1.14“, 28.9 mm
Magnetic Gap Depth 0.47“, 12 mm
Flux Density 1.22 T
THIELE & SMALL Parameters
Resonant Frequency (fs) 35 Hz
DC Resistance (Re) 5 Ohm
BL Product (BL) 24.8 N/A
Diaphragm Mass inc. Airload (Mms) 211.8 grams
Mechanical Compliance of Suspension (Cms) 0.098 mm/N
Rms 4.19 Kg/s
Electromagnetic Q (Qes) 0.38
Mechanical Q (Qms) 11.1
Total Q (Qts) 0.37
Compliance Equivalent Volume (Vas) 6.74 ft³, 190.8 dm³
Surface Area of Cone (Sd) 181.97“², 1174 cm²
Maximum Linear Excursion (Xmax)* 12.45 mm
Xdamage** 21 mm
Coil Inductance (Le) 1.26 mH
Diaphragm mass (Mmd) 189.1 g
Eta Zero 2.1 %
Notes
*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power
|
- Shape Cylindrical
- Product type Cone driver
- Brand Sica
- Frequency coverage type Sub
- Dimensional category 18 inch
- Front chape Cylindrical
- Magnet type Ferrite
- Basket masterial Aluminium
- Nominal impedance 4 ohm
- Nominal power handling 700 W
- Max power handling 1400 W
- Sensitivity 97.9 dB
- Voice coil diameter 4 inch
- Flux density 1.12 T
- External diametre 462 mm
- Mounting diametre 415 mm
- Depth 203.5 mm
- Depth after front 188.5 mm
- Front thickness 15 mm
- Diamètre aimant (mm) 220 mm
- Weight 13.9 kg
- Fs 36.9 Hz
- Re 3.25 ohm
- Qes 0.29
- Qms 9.03
- Qts 0.28
- Vas 181.9 L
- Sd 1164.2 cm²
- Cms 95 µm/N
- Efficiency 3.02 %
- Xmax 6 mm
- Mms 196.2 gr
- BL 22.55 T.m
- Le 1.03 mH
- EBP 127
- Dome material Paper
- Cone material Paper
- Surround material Cloth
- Shipping weight 13.9 kg
|
- 95 dB Sensitivity 1 W / 1 m
- 1.200 W Power Handling
- 4" Copper Sandwich Voice Coil for low Power Compression
- Neodymium Magnet System
- Double treated Cone for Water Protection
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for high Output Subwoofers
- Leight Weight Carbon Fiber Diaphragm
|
| Woofer 18 1000WRMS 97dB
2000 W continuous program power capacity |
|
| 100 mm (4 in) copper voice coil |
|
| 35 – 1000 Hz response |
|
| 97 dB sensitivity |
|
| Aluminium demodulating ring allows a very low distortion figure |
|
| Double silicone spider with optimized compliance |
|
| Ventilated voice coil gap for reduced power compression |
|
Reviews
There are no reviews yet.