Master Audio MQA4100 professional power amplifier2 X 250W RMS / 8Ω, 2 X 350W RMS / 4Ω

199.00 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Professional amplifier – 250W RMS each channel on 8 Ohm – 350W RMS each channel on 4 Ohm – Frequency response: 10-50.000 Hz – Input sensitivity: 0,775V – Signal/noise rate: >96dB – Segregation ratio: >70dB – Dumping factor: >350 – Input impendance: 20Kohms – Slew rate: 45V/microsec. – Thermal protection, short circuit, overload – Ground/Lift […]

 

Read more

Professional amplifier

– 250W RMS each channel on 8 Ohm

– 350W RMS each channel on 4 Ohm

– Frequency response: 10-50.000 Hz

– Input sensitivity: 0,775V

– Signal/noise rate: >96dB

– Segregation ratio: >70dB

– Dumping factor: >350

– Input impendance: 20Kohms

– Slew rate: 45V/microsec.

– Thermal protection, short circuit, overload

– Ground/Lift switch

– RCA, Jack 6.3 mm inputs

– Speakon, jack 6.3 mm, binding connector output

– Dimensions: 482 x 294 x 88 mm

– Weight: 11kg

– Package: 1 piece each box

Weight 11.00 kg
Ohm

Reviews

There are no reviews yet.

Be the first to review “Master Audio MQA4100 professional power amplifier2 X 250W RMS / 8Ω, 2 X 350W RMS / 4Ω”

Your email address will not be published. Required fields are marked *

Quick Comparison

Master Audio MQA4100 professional power amplifier2 X 250W RMS / 8Ω, 2 X 350W RMS / 4Ω removeFOSTEX RM-2 Amplifier d-class (10W x 2) removeRCF HPS 1500: CLASS H PROFESSIONAL POWER AMPLIFIER removeBITTNER AUDIO BASIC 400-2x200W-4Ω POWER AMPLIFIER removeAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts removeYAMAHA PC-2001N Power Amplifier 2x250W remove
NameMaster Audio MQA4100 professional power amplifier2 X 250W RMS / 8Ω, 2 X 350W RMS / 4Ω removeFOSTEX RM-2 Amplifier d-class (10W x 2) removeRCF HPS 1500: CLASS H PROFESSIONAL POWER AMPLIFIER removeBITTNER AUDIO BASIC 400-2x200W-4Ω POWER AMPLIFIER removeAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts removeYAMAHA PC-2001N Power Amplifier 2x250W remove
Image
SKUMQA4100RM 2HPS1500BASIC400E004734H060.00037
Rating
Price 199.00 incl. GR VAT 435.00 incl. GR VAT 596.44 incl. GR VAT 533.20 incl. GR VAT 389.00 incl. GR VAT 1,444.00 incl. GR VAT
Stock

In stock (can be backordered)

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityIn stock (can be backordered)In stockAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentProfessional amplifier - 250W RMS each channel on 8 Ohm - 350W RMS each channel on 4 Ohm - Frequency response: 10-50.000 Hz - Input sensitivity: 0,775V - Signal/noise rate: >96dB - Segregation ratio: >70dB - Dumping factor: >350 - Input impendance: 20Kohms - Slew rate: 45V/microsec. - Thermal protection, short circuit, overload - Ground/Lift switch - RCA, Jack 6.3 mm inputs - Speakon, jack 6.3 mm, binding connector output - Dimensions: 482 x 294 x 88 mm - Weight: 11kg - Package: 1 piece each box
  • Rack mount stereo powered monitor speaker system
  • New AES/EBU digital input
  • lndependent MUTE function
  • Sophisticated control panel section
  • Ideal where space is at a premium
RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, RM-2 is now more versatile to various applications.
  • Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4" plug).
  • AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
  • Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
  • Independent MUTE function by holding down CH SEL key for a while.
  • Auto Mute when powering on*.
  • D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
  • Multi-voltage power supply.

Speaker Section

  • Unit: 110 x 40mm cone type, magnetically shielded, x 2
  • Impedance: 8 ohms
  • Output SPL: 84 dB/W (1m)
  • Frequency response: 200Hz to 20kHz

Amplifier Section

  • Rated output power: 10W or more (8 ohms, 1kHz)
  • Residual noise: -60 dBV or less (DIN AUDIO)
  • Distortion: 0.5% or less (10W / 4 ohms, 1kHz)

Digital input

  • Connector: XLR-3-31 type
  • Digital input Format: IEC60958 (AES/EBU)
  • Digital inputSampling frequency: 44.1kHz to 96 kHz

Analog input

  • Connector: XLR / 1/4" combi-jack
  • Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
  • Analog input Input impedance 10k ohms or more

Phones

  • Connector: 1/4" stereo jack
  • Applicable load imp. 8 ohms or more
  • Rated output power 20mW + 20mW (32 ohms, 1kHz)

General

  • External dimensions: 430(W) x 44(H) x 282(D) mm
  • Weight: Approx. 3.5kg
  • Power requirement: 100 - 240V~, 50/60Hz
  • Power consumption: 10W

HPS 1500 is a 2 channel power amplifier that delivers up to 2 x 750 W RMS @ 4 Ω (1500 W RMS bridged @ 8 Ω).

XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.

Features
Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety
Front panel signal / clip / protect LED indicators
Minimum load impedance (stereo / mono): 4 Ohm
XLR input connectors
SPEAKON output connectors
Switchable limiter

2 unit 19" rack, low weight for easy transportation

 

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 750 Watt rms 
Power output stereo 8Ω:2 x 450 Watt rms 
Power output bridged 8Ω:1500 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:106 dB 
Damping factor:> 300 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:xlr 
Input sensitivity:1.4 V (/ 32 – 26 dB) dBm/V RMS 
Input impedance: 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ 
OUTPUT SECTION
Output connector:Speakon 
SYSTEM PARAMETERS
Cooling:Forced 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220 ÷ 240 V (50 / 60 Hz) V ~ Hz  
PHYSICAL SPECIFICATIONS
Height:88/3.4 mm/inch 
Width:482/18.9 mm/inch 
Depth:420/16.5 mm/inch 
Net Weight:17/37.4 Kg/Lbs

 

 

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 400:  2x 200 W @ 4 Ohm 
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  12 kg.
Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)

VLP Series Power Amplifier


Output Power:
- 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
(Bridge Mode, Mono)
- 300W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 260

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift

Dimensions (LxWxH): 13.25" x 19" x 1.75" / 336 x 482 x 44mm (1-rack mount space)

Weight: 24 lbs. / 11Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange, and superbly defined highs. They also deliver fast response and exceptional stability even in the face of serious power supply limitations. Refinements throughout this expanded five-model lineup make these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Output Power: 2 x 250 Watt / 8Ω RMS, 2 x 450 Watt / 4Ω RMS, 900 Watt / 8Ω bridge RMS. Weight: 12,5 Kg.

Weight11.00 kg3.50 kg20.00 kg12.00 kg11.00 kg12.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.00 kg
Ohm

Weight 3.50 kg
Weight 20.00 kg
Weight 12.00 kg
Weight 11.00 kg
Weight 12.50 kg