| Content | MASTER AUDIO SB250 Passive Loudspeaker 2 Way 10" 200Wrms 8 Ohm
- 2-way passive speaker box
- Impedance(Ohm) 8
- Power output 200 W RMS
- ABS box - Woofer 10“, paper cone
- Compression driver,1" titanium diaphragm
- Frequency reponse: 50 - 17KHz (-10dB)
- Sensitivity: 103 dB - Speakon input and output
- Dimension: 472 x 345 x 270 mm
|
Specifications
Technical data
Speaker Type 2-Way Passive Speaker
Acoustical data
Nominal Power Rating 300 W/RMS
Program Power Rating 600 W/RMS
Peak Power Rating 900 W/RMS
Impedance 8 Ohms
Sensitivity 1W@1m 96 dB
Frequency Response [-10dB] 70 - 20.000 Hz
Frequency Response [+/- 3dB] 90 - 19.000 Hz
Max SPL 127 dB
HF 1 "
Type HF Compression Driver
Voice Coil HF 1.5 "
Driver Protection PTC
Directivity 90X70 °
Horn CD Horn Aluminium
Rotatable Horn Yes
Crossover Frequency (passive) 1800 Hz
Slope MF-HF 18 dB/Octave
LF 10 "
Voice Coil LF 2 "
Input Section
Signal Input 1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output 1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics
Housing Multiplex birch plywood
Housing Design Multifunctional
Color Black
Surface Texture Textured acrylic lacquer
Handles 1x on back
Pole Mount 36mm
Angles Up Monitore use 45 °
Front Grille 1.5 mm metall grille with acoustic foam in back
Rigging Points 12 x M8
Width 320 mm (12.8 in)
Height 508 mm (20.32 in)
Depth 320 mm (12.8 in)
Weight 14.2 kg (31.31 lbs)
Downloads
Accessory
Systems / Components
|
| 2-Way, 10“
High Power System |
| Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
| Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
| Specifications and Characteristics |
| Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
| Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
| Nominal Impedance |
8 Ohm |
| Power Rating |
|
| (RMS)2 |
300W |
| Program2 |
600W |
| Peak2 |
1200W |
| Horizontal Coverage |
(-6dB) 90? |
| Vertical Coverage |
(-6dB) 40? |
| Sensitivity (dB/1w@1m) |
97dB SPL |
| SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
| Connectors |
2 Neutrik NL-4 Connectors on steel plate |
| Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
| Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
| Recommended Sub-woofer |
Space PMS-15 |
| Enclosure and Installation |
| Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
| Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
| Handle |
On top of the cabinet. |
| Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
| Net Weight |
18Kg (39.6 pounds) |
| Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
| Notes |
|
| 1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
|
Because the TOA T-650 speaker employs a horn for short distance coverage and a horn for long distance coverage, it ensures high intelligibility even in sports facilities or public halls where many reverberations are generated. The speaker is designed to be installed as a main speaker in small and intermediate indoor sports facilities, and its heavy-duty construction protects unit against impacts from balls and other objects.
| Enclosure | Bass reflex type | | Power Handling Capacity | Continuous pink noise: 120 W, Continuous program: 360 W | | Rated Impedance | 8 Ω | | Sound Pressure Level | 100 dB (1 W, 1 m) | | Frequency Response | 80 - 20,000 Hz | | Crossover Frequency | 1.2 kHz (passive network) | | Speaker Component | Low frequency: 25 cm cone speaker × 2
High frequency: (for long-distance use) CD horn fitted with compression driver
(60 horizontal × 30 vertical)
(for short-distance use) CD horn fitted with compression driver
(90 horizontal × 40 vertical) | | Input Terminal | 2-pole M5 screw terminal, distance between barriers: 12.2 mm | | Finish | Enclosure: Coniferous plywood, black, semi-mat, urethane paint
Grille: Steel plate, black, semi-mat, acryl paint
Mounting bracket: Steel plate t3.2, black, semi-mat, acryl paint | | Dimensions | 288 (W) × 827 (H) × 354 (D) mm | | Weight | 22 kg (including mounting brackets) | | Accessories | Speaker mounting bracket A,B ……1, Speaker mounting bolt ……8, Eyebolt ……1 | | Option | Matching transformer: MT-S0601 |
|
Features
Hard-suspension bass with Kapton spool
High-range horn with thermal overload protection
Integrated high-quality frequency cross-over (not for RSP-18 S)
Sound characteristics geared especially to heavy-bass sounds like hip hop, techno, house & breaks
High-performance reserves
Extremely durable, road-compatible carpeting
Protective metal corners
Large carrying shells made of metal
Sunk-in metal flange for tripods (not RSP-12 M and RSP-30)
Robust front grid
Connections via PA pro speaker cable and 6.3 mm jack
Technical Data
100 watt RMS PA-speaker
Max. capacity: 200 watt
Type: 2-way system
Frequency range: 45 Hz - 20 kHz
Acoustic pressure: 97 dB
Speaker: 25 cm (10“) woofer, mid-range and tweeter
Impedance: 8 ohm
Dimensions: 530 x 375 x 340 mm
Weight: 11.5 kg
|
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
| Features |
|---|
| Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | | Stainless steel bracket | | One 10" high-output LF transducer with 2" voice coil | | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | | 90° x 40° constant directivity horn | | Built in passive crossover and selectable line transformer | | 10° X 20° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | | LICC (Low Impedance Compensated Crossover) network | |
12 brass suspension points (M8)
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 118 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 11 | | | System Sensitivity: | 95 dB | | | Nominal Impedance: | 16 Ω | | | Power Handling: | 200 Watt | | | Peak Power Handling: | 800 Watt | | | Recommended Amplifier: | 400 | | | Protections: | Dinamyc | | | Crossover frequencies: | 2000 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.5" HF driver, 1" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 106 dB | | | Woofer: | 10" woofer, 2.5" voice coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 180 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 5m, 4-adriges Neopren Kabel | | | Constant voltage transformer: | 70/100 | | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
| CABINET |
|---|
| Cabinet Material: | Polyethylene rotomoulded | | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Grey | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 350 / 13.78 mm/inch | | | Width: | 350 / 13.78 mm/inch | | | Depth: | 320 / 12.60 mm/inch | | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
Reviews
There are no reviews yet.