Content |
With the AKG MDAi CPA Connected PA microphone adapter, all your favorite dynamic vocal mics instantly become part of the HARMAN Connected PA system. Simply attach the device to any input of your Soundcraft Ui24r mixer and then plug-in your dynamic mic and mic cable for automatic recognition with the HARMAN Connected PA app and ecosystem?providing effortless set up, instant recall of performer and presets, and great sound for musicians of all skill levels.
Current products with embedded ioSYS technology and HARMAN Connected PA compatibility include the Soundcraft Ui24R mixer, JBL PRX800W loudspeakers, dbx Di1 direct boxes, and AKG P5i microphones. |
Shure PM4E 6in-6out Personal Monitor Mixer
The P4M is a highly versatile four-channel, two-bus stereo mic/line mixer designed to optimize use of personal (in-ear) monitors like the Shure PSM 400 in live performance. The P4M features four balanced mic/line inputs, each with level and panning controls. Corresponding XLR split outputs allow input signals to pass through the unit unaffected, while providing an independent mix.
Personal Stereo Monitors
When coupled with personal monitors, the P4M allows performers the ability to adjust personal mix levels onstage - even during a performance - without affecting the front-of-house system. This enables users to create and maintain consistent monitor mixes, regardless of what the venue can provide for monitors. The P4M is available individually for use with Shure PSM 600 and PSM 700 Personal Monitor Systems; or packaged with Shure's PSM 400 Hardwired and Wireless Performance Packs.
Installed Sound Systems
The P4M can also be used as a small "piggyback" mixer in applications such as houses of worship, or courtrooms. The unit acts as a console bypass when a permanent installation of a large, operator-controlled mixing console may require just a few microphones for smaller events. This allows the user easy access and control of up to four signals without having to utilize the larger console. Given its dual-bus output capabilities, the P4M can also serve as a "two zone" mixer, routing any combination of mic or line-level signals to two different zones.
More Than Four Inputs
The P4M has a pair of 1/4-inch auxiliary inputs that can be used to add channels from other sources. For example multiple P4M mixers can be linked together to increase the number of inputs. In addition, sources not present in the original mix - such as a click track for live percussion - may be included via the auxiliary inputs.
Measurement Conditions (unless otherwise specified): full gain; 1 kHz, one channel activated; >source impedances: Mic 150 ohms, Aux Level 150 ohms; terminations: Line 600 ohms. Frequency Response (Ref 1 kHz, controls centered) 20 Hz to 20 kHz +/- 2 dB
Input Specifications Input 1-4 (front panel) Aux In Gain (Maximum) 43 dB 0 dB Impedance (at 1 kHz) 5800 ohms 18 kilohm (each) 9100 ohms (1/L mono) Input Clipping Level +12 dBV +12 dBV Crosstalk -100 dB -90 dB Common Mode Rejection > 75 dB > 70 dB
Output Specifications Output Split 1-4 Mix Out Impedance N/A 500 ohm (unbalanced) 1 kilohm (balanced Output Clipping Level N/A +5 dBV (10 kilohm balanced load, -30 dBV input ch. 1-4) Noise (100 Hz to 22 kHz) -110 dBV -100 dBV (all controls CCW) -62 dBV (all controls CW) Distortion (THD) at 1 kHz .0005% |
Featuring a camera-shoe mount with a 3/8' thread in the base that can be mounted in three different positions, the RØDEGrip can be used in a number of orientations and setups. These include:
- Handheld audio recording with the iXY stereo microphone
- Boom stand mounted audio recording with the iXY
- Camera-mounted audio recording with the iXY
- Handheld pistol grip filming with the iPhone
- Desktop mounted for handsfree iPhone display and filming
- Camera-mounted iPhone display for photography apps
- Constructed from durable, high-quality ABS plastics, it folds down into a small, portable form factor for ease of transport.
| The Gravity MA 3D A lets you attach microphones, action cams and mobile phone holders to your microphone stand, and set them up flexibly. Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws.
Material: Plastic , Polyamide
Joint adjustment: Wing screw
Joint rotation: 360°
Joint tilt: 180°
Arm length: 400 mm
Suitable for mounting on: Microphone Stands
Suitable for tube diameter: 15 mm - 35 mm
Colour: Black
Thread size: 3/8”
Weight: 0,302 kg
| Portable Battery phantom power supply for microphones with TQG and AKG connection.
Balanced XLR output
2 three-pole TQG male inputs (Mini XLR)
Both inputs adjustable
On-off switch
Mic / Line level in the output switchable
9 V battery power
20 hours of operation with 1 battery
Power LED |
The new AT8657/LED table-mount microphone adapter adds functionality to quick-mount gooseneck models from the Audio-Technicaʼs Engineered Sound, Unipoint and ProPoint installation mic ranges and ES945 and ES947 boundary microphone models.
The new AT8657/LED features a touch-sensitive capacitive switch surrounded by an illuminated LED status ring that can be set between red (mute) and green (on). Its integrated 3-pin XLR allows the table-mounting of gooseneck microphones with XLR connectors while the AT8657/LED has a 5-pin XLR out for audio and control data.
AT8657LED Specifications 270 KB
|
Reviews
There are no reviews yet.