Content |
Features
■ High current TRIAC
■ Low thermal resistance with clip bonding
■ High commutation capability
■ BTA series UL1557 certified (File ref: 81734)
■ Packages are RoHS (2002/95/EC) compliant
Applications
■ On/off function in static relays, heating
regulation, induction motor starting circuits
■ Phase control operations in light dimmers,
motor speed controllers, and similar
Description
Available in high power packages, the
BTA/BTB40-41 series is suitable for general
purpose AC switching.
The BTA series provides an insulated tab (rated at
2500 V rms).
|
ARTLIGHT LED12WRGBWAUV LED CHIP 12 Watt 6 in1 RED GREEN BLUE WHITE AMBER UV FOR ELATION SIXPAR200 502010050 and more Power:6w,12w,18w Led Chip Model:Led Chip Lifespan:50,000 hours Lamp color: 1Blue , 2Green, 3Red, 4White, 5Ultraviolet, 6Amber,
|
FULL-BRIDGE PWM MOTOR DRIVER
The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.
The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation.
A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.
An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A.
Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN
STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole
Key Features - Able to drive both windings of bipolar stepper motor
- Output current up to 750 mA each winding
- Wide voltage range: 10 V to 46 V
- Half-step, full-step and microstepping mode
- Built-in protection diodes
- Internal PWM current control
- Low output saturation voltage
- Designed for unstabilized motor supply voltage
- Internal thermal shutdown
|
DRV134PA, Audio Amplifier 6 46dB +85 °C 8-Pin PDIP
Features
- Balanced Output
- Low Distortion: 0.0005% at f = 1 kHz
- Wide Output Swing: 17Vrms into 600 Ω
- High Capacitive Load Drive
- High Slew Rate: 15 V/µs
- Wide Supply Range: ±4.5 V to ±18 V
- Low Quiescent Current: ±5.2 mA
- 8-Pin DIP, SO-8, and SOL-16 Packages
- Companion to Audio Differential Line Receivers:
INA134 and INA137 - Improved Replacement for SSM2142
- Description
The DRV134 and DRV135 are differential output amplifiers that convert a single-ended input to a balanced output pair. These balanced audio drivers consist of high performance op amps with on-chip precision resistors. They are fully specified for high performance audio applications and have excellent ac specifications, including low distortion (0.0005% at 1 kHz) and high slew rate (15 V/µs).
The on-chip resistors are laser-trimmed for accurate gain and optimum output common-mode rejection. Wide output voltage swing and high output drive capability allow use in a wide variety of demanding applications. They easily drive the large capacitive loads associated with long audio cables. Used in combination with the INA134 or INA137 differential receivers, they offer a complete solution for transmitting analog audio signals without degradation.
The DRV134 is available in 8-pin DIP and SOL-16 surface-mount packages. The DRV135 comes in a space-saving SO-8 surface-mount package. Both are specified for operation over the extended industrial temperature range, –40°C to +85°C and operate from –55°C to +125°C
| Application | General Purpose Audio |
| Input Signal Type | Differential |
| Output Signal Type | Differential |
| Typical Gain Bandwidth Product | 6 |
| Minimum CMRR | 46dB |
| Mounting Type | Through Hole |
| Package Type | PDIP |
| Pin Count | 8 |
| Power Supply Type | Dual |
| Typical Dual Supply Voltage | ±18V |
| Dimensions | 9.81 x 6.35 x 4.57mm |
| Length | 9.81mm |
| Height | 4.57mm |
| Maximum Operating Temperature | +85 °C |
| Minimum Operating Temperature | -40 °C |
| Width | 6.35mm |
| Number of Channels per Chip | 1 |
|
60W LED AND single chip CBT90_PHLATLIGHT
HIGH POWER LED can compeltly replace 400w traditonal lamp
Voltage 3.8v / current 18A /the total lumens is better be use in endoscope light box.
| Type | LED Module | Color | White, Cool | CCT (K) | 6500K | Wavelength | - | Configuration | Rectangle | Flux @ Current/Temperature - Test | - | Current - Test | 9A | Temperature - Test | 70°C | Voltage - Forward (Vf) (Typ) | 3.3V | Lumens/Watt @ Current - Test | - | Current - Max | 18A | CRI (Color Rendering Index) | 70 (Typ) | Viewing Angle | - | Features | With Connector | Size / Dimension | 28.00mm L x 42.00mm W | Height | 5.60mm | Light Emitting Surface (LES) | 3.00mm L x 3.00mm W | Lens Type | Flat | Other Names | 1214-1040
CBT90W65SC11MB102 |
---|
|
ARTLIGHT LED18WRGBWAUV LED CHIP 18 Watt 6 in1 RED GREEN BLUE WHITE AMBER UV FOR Stage Lighting
Power:6w,12w,18w Led Chip Model:Led Chip Lifespan:50,000 hours Lamp color: 1Blue , 2Green, 3Red, 4White, 5Ultraviolet, 6Amber,
|
Reviews
There are no reviews yet.