Content |
Stage Passive Splitter 4 Inputs, 3 Outputs for each channel.
- 4 Channels of 3 way transformer splits in one 1U rack space device
- Balanced XLR Inputs and Outputs
- Ground Lift Switches on each Isolated Output
- Small 1U size
- Good quality transformers for the splits
Applications
This is the EWI MST-412 4 Channel, 3 way, transformer isolated XLR splitter. This is an ideal, rack-mountable splitter for many applications, including:
1) Splitting XLR signals for taking a recording directly off a house mix.
2) Sending mixed signals to multiple amp racks.
3) Splitting XLR signals between house and monitor mixers.
4) Multiple XLR feeds for broadcast.
The MST-412 has some nice features:
1) Durable construction and all is housed in a convenient 1U rack mount unit.
2) Balanced XLR inputs and outputs.
3) Ground lift switches on both of the Isolated Split Outputs.
4) Good quality transformers for the splits.
5) The Direct Outs will pass Phantom Power. The two isolated split outputs do not pass phantom power.
On the front side EACH of the 4 input channels are equipped with a direct output and one isolated output with the ground lift switch next to the isolated output.
On the back side is one more isolated output panel jack and a direct output jack for EACH of the 4 channels plus ground lift switches for each back isolated split. The rear Direct Out jack is in parallel with the front Direct Out jack.
Physical properties are: The width is standard 19” rackmount. The height is 1 U (1 ¾”). The depth is 4” behind the rack ears. There are 4 nice little rubber feet on the bottom to help keep if from sliding around on a slick surface, or marring up something you set it on. Weight is 2.95 lbs. This is a passive device, so no active power is required. The chassis is heavy gauge steel and the front mounting plate is 0.075” extruded aluminum (no plastic here). As well as being durable, the all-metal construction further helps to reduce induced EMI into the unit. The panel jacks are constructed with plastic bodies, and the FXLR input panel jacks are constructed with spiral spring contact points with no locking device other than the solid fit of the spiral spring contacts.
- Make: EWI
- Model: MST-412-A
- Type: Rackmount 4 channel 3 Way Transformer XLR Splitter
- Channels: 4 x 3
- Inputs: 4ea. (1 per channel) 570 ohm balanced XLR
- Outputs: 16ea. (3 per channel) 1 Kohm ohm balanced XLR
- Split Voltage Loss: Less than 2.5dB @ 1KHz
- THD:
| Practical distributor with 1 input and 6 outputs
- Extends every mixer with additional outputs
- 1 stereo XLR input
- 6 stereo zone outputs (XLR)
- Each zone with level control and mono switch
- LED display of signal input and mono/stereo mode
- Rack installation with 1 U
- (19") 48.3 cm rack installation 1 U
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
7 W |
S/N ratio: |
>69 dB |
THD: |
<0.2 % at 1 kHz |
Power connection: |
Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) |
Impedance: |
Input 45.1 kOhm
Output 125 Ohm |
Gain: |
15 dB |
Max. level: |
Output: +22 dB
Input: +9 dBV |
Color: |
Silver |
Housing design: |
(19") 48.3 cm rack installation 1 U |
Dimension: |
Width: 48.3 cm
Depth: 12.6 cm
Height: 4.45 cm |
Weight: |
2.15 kg |
| Passive splitter box for microphone signals. One module has 4 channels. Each channel has an input, an output wired in parallel for passthrough of phantom power, and two splitter transformer-isolated outputs. All outputs are also decoupled via resistors.
- Each channel: Input: female XLR type
- Outputs: 1 parallel male XLR type, 2 transformer isolated male XLR type
- Nominal impedance for inputs/outputs: 200
- Max. input level: + 6 dBu
| The MX225 is designed for remote volume control of multiple amplifiers or powered speakers in a distributed audio system. Two stereo sources are available to each of five output zones. Each source input pair handles separate left and right balanced line level signals. Each output zone features independent level control from inputs 1 and 2, stereo/mono selector with mono indicator, LED level metering, and left and right balanced line level zone outputs. All audio connections are balanced XLR. The built in power supply and single high 19″ rack mount format allows for easy installation and reliable operation.
- 5 Zone mixer / distributor
- Adjusts volume of multiple amplifiers or active monitors separately
- Stereo/mono switch + clip and 5 segment LED on each zone
- Connectors: 4x line in XLR (2x L/R), 10x XLR Out (5x L/R)
- Dimensions: 482 x 152 x 44.5 mm (19"/1U)
- Weight: 2.4 kg
XLR-F balanced (x4) |
XLR-M balanced (x10) |
47k Ω |
200 Ω |
.05% Typical |
> 90dB typical |
+20dBu |
+24dBu balanced |
+6DB |
USA – 105 to 125 VAC / 50-60Hz, 15 W typical |
1.75″H x 19″W x 7.25.0″D (44.5mm x 483mm x 184mm) |
5.34 lbs (2.42 kg) |
|
- With improved 192 kHz sample rate for the best sound reproduction.
- Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) audio signals.
- Supports compressed 2-channel and multi-channel Dolby Digital and DTS audio signals.
- Ideal for presentation or distribution to another room.
- The optical (Toslink) digital audio splitter can split a single optical digital input to four outputs without delay or loss of quality.
- Supports the S/PDIF and Toslink standard.
Your TV has 1 Toslink output, but you use 2 amplifiers. This requires the Toslink cable to be split from 1 into 2. An additional amplifier could be, for example, a surround set, a sound bar of an amplifier in the kitchen.
Connections
|
|
Audio input |
1 x Toslink (optical) |
Audio output |
2 x Toslink (optical) |
Audio
|
|
Supported audio |
PCM2, Dolby Digital 5.1 and DTS |
Sample rate |
Up to 192 kHz |
General
|
|
Dimensions (h x w x d) |
24 x 46 x 46 mm |
Weight |
22 grams |
Ambient temperature |
+0 to +40 °C |
Humidity |
10% to 85% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
- Connect 2 TVs or projectors and switch between 4 connected HDMI devices.
- HDMI matrix switch allows you to watch other HDMI devices on 2 screens independently.
- Use the built-in 1080p downscaler in case 1 or more screens do not support 4K resolution.
- Suitable for the latest Ultra HD 4K60 resolution (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color and 4:4:4 chroma colours.
- Supports Dolby Atmos and DTS:X and all other common audio formats.
- With additional digital audio output to also connect your AV receiver using a single cable.
- Supports Audio Return Channel (ARC) to avoid lip-sync problems.
- Switches automatically and/or with remote control.
Connections
|
|
AV input |
4 x HDMI |
AV output |
2 x HDMI |
Digital audio output |
1x Toslink (optical) |
Video
|
|
Video resolution |
Max. 4K60 (3840 x 2160@60 Hz) |
PC resolution |
Max. 2560 x 2048 Hz |
Video bandwidth |
18 Gbps |
Clock frequency |
Max. 600 MHz |
HDMI standard |
HDMI, EDID, DVI, Deep Color 36 bit, x.v. Colour and 3D formats |
HDCP standard |
HDCP 2.2 |
Colour formats |
RGB and YCbCr 4:4:4, 4:2:0 or 4:2:2 |
Colour depth |
Max. 36 bit |
Audio
|
|
HDMI audio |
DTS-HD Master Audio, Dolby TrueHD, Dolby Atmos, DTS:X, Dolby Digital/AC3, DTS 5.1 and PCM stereo |
Optical Audio |
Dolby Digital/AC3, DTS 5.1 and PCM stereo |
General
|
|
Dimensions (h x w x d) |
18 x 242 x 104 mm |
Weight |
620grams |
Power |
100-240 VAC 50/60 Hz, 12 VDC adapter |
|
Reviews
There are no reviews yet.