AKG WMS 40 MINI INSTR Wireless Instrumental Set

111.00 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The WMS 40 Mini Instrumental Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio. Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time. The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping […]

 

Read more

The WMS 40 Mini Instrumental Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.

The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼” output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters.

The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR output allows you to connect every compatible AKG miniature microphone. Battery life of the transmitter is the same legendary “30 hours off a single AA battery” as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.

The system includes an SR 40 MINI receiver, a PT 40 MINI pocket transmitter, a MKG L instrument cable, a universal power supply with US/UK/EU adapter, and one AA size dry battery.

User’s Manual

Weight 1 kg

Reviews

There are no reviews yet.

Be the first to review “AKG WMS 40 MINI INSTR Wireless Instrumental Set”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG WMS 40 MINI INSTR Wireless Instrumental Set removeAKG WMS 40 MINI2 INSTR Dual instrumentl wireless system removeAUDIO TECHNICA ATW-3110b/P UHF Body Pack System with AT829cW removeLINE 6 RELAY G-30 Wireless Guitar/Bass System removeLD Systems LDWIN42BPG2 WIN 42 Series - Wireless Microphone System with 2 x Belt Pack and 2 x Gitarrenkabel removeLD Systems LDWIN42BPG WIN 42 Series - Wireless Microphone System with Belt Pack and Guitar Cable remove
NameAKG WMS 40 MINI INSTR Wireless Instrumental Set removeAKG WMS 40 MINI2 INSTR Dual instrumentl wireless system removeAUDIO TECHNICA ATW-3110b/P UHF Body Pack System with AT829cW removeLINE 6 RELAY G-30 Wireless Guitar/Bass System removeLD Systems LDWIN42BPG2 WIN 42 Series - Wireless Microphone System with 2 x Belt Pack and 2 x Gitarrenkabel removeLD Systems LDWIN42BPG WIN 42 Series - Wireless Microphone System with Belt Pack and Guitar Cable remove
Image
SKUWMS 40 MINI INSTR.WMS 40 MINI2 INSTRATW-3110b/PH12LN00000LDWIN42BPG2LDWIN42BPG
Rating
Price 111.00 incl. GR VAT 209.99 incl. GR VAT 586.73 incl. GR VAT 199.00 incl. GR VAT 1,146.82 incl. GR VAT 560.59 incl. GR VAT
Stock

In stock (can be backordered)

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stock (can be backordered)In stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe WMS 40 Mini Instrumental Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio. Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time. The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters. The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR output allows you to connect every compatible AKG miniature microphone. Battery life of the transmitter is the same legendary "30 hours off a single AA battery" as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run. The system includes an SR 40 MINI receiver, a PT 40 MINI pocket transmitter, a MKG L instrument cable, a universal power supply with US/UK/EU adapter, and one AA size dry battery. User's ManualThe sense of freedom that comes with a wireless kit can't be beaten. The freedom to move around the stage during a song, the ability to walk out across the floor during sound check to hear how your band sound to the audience, that moment where you end standing proudly on the bar amidst a cheering crowd. Wireless kits give you so much more choice when performing. (cheering crowd and irritated bartender sold separately) Even if leaping from the stage isn't for you, the WMS 40 is still a great choice for sound. AKG have a great reputation for quality and tone. Crystal clear sound and high end transmission and receiving technology means no loss of sound quality, a common issue with some cheaper wireless kits. Plug and Play The WMS40 Mini wireless microphone system provides crystal clear sound and is a true plug'n'play solution. Up and running in a second, it is the optimum wireless solution for small stages, clubs, places of worship, hotels, and gyms. The system is available in different application optimized set packages, all of which includes a universal, switched mode power supply for worldwide operation. Long lasting The WMS40 Mini system stands out for its extremely long battery life of 30 hours with a single AA battery which helps saving money in the long run Dual input/output Unlike a lot of wireless kits that only handle 1 signal at a time the Mini2 allows you to either have 2 guitars setup and ready with the same reciever or to give the spare trnasmitter to your second guitarist/ bass player. This means less equipment to carry around and less clutter on stage. You can even make quick guitar changes with each running through an independant channel. No more unclipping and unplugging your transmitter while the audience waits. Features
  • Up to 30 hours playtime with one single AA battery
  • Plug and Play
  • Gain control on pocket transmitter
  • Compatible with all AKG MicroMics
  • Low battery indicator
  • The WMS 40 Mini2 Instrumental Set Dual ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time. The SR 40 Mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off simultaneously. The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR input allows you to connect every compatible AKG miniature microphone. Battery life is the same legendary 30 hours off a single AA battery as for the standard WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run. The system includes an SR 40 MINI2 receiver, 2 PT 40 MINI bodypack transmitters, 2 MKG L instrument cables, a universal power supply with US/UK/EU adapters, and 2 AA size dry batteries. Features
  • Up to 30 hours playtime with one single AA battery
  • Plug and Play
  • Gain control on pocket transmitter
  • Compatible with all AKG MicroMics
  • Low battery indicator
Specifications Audio
  • Audio Frequency bandwidth 40 to 20000 Hz
  • Signal to Noise 110 dB-A
  • THD at 1 kHz 0.8 Prozent
  • Operating temperature range -10 to 55 Celsius
  • Radio Sensitivity -100 dBm
  • Recommended simultaneous channels 3
  • Number of selectable frequencies 1 Fixed frequency
  • Frequency Selection Fixed frequency
  • Radio Range (Line of Sight) 20m
  • Modulation FM
  • Transmitter Synchronization: Not necessary
  • HiQnet compatible No
  • Racksize 1/3 Racksize (19“)
  • Rackheight 1 RU
Outputs
  • Amount 2
  • Type Balanced Jack (1/4“)
  • Gender Female
  • Contacts 3-pin
  • Note Balanced audio output adjustable from mic to line level. Output level at rated deviation: 500 mV rms
Power
  • Type DC Socket
  • Voltage 12 to 12 V
Design
  • Body: Metal
  • Finis: black
Dimensions / Weight
  • Length 132 mm
  • Height 43 mm
  • Width 133 mm
  • Net Weight 581 g
Optional microphones for PT 40 Mini

System Specifications
Operating Frequencies: UHF band

Band C: 541.500 MHz to 566.375 MHz (996 frequencies)

Band D: 655.500 MHz to 680.375 MHz (996 frequencies)

Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)

Not all frequencies are available in all areas. Please check with local regulations.

Minimum Frequency Step: 25 kHz

Modulation Mode: FM

Maximum Deviation: +/-35 kHz

Dynamic Range: > 110 dB (A-weighted), typical

Total Harmonic Distortion:
Operating Range: 100 m (300'), typical

Open range environment with no interfering signals.

Operating Temperature Range: -5o C to +45o C (23o F to 113o F)

Battery and LCD performance may be reduced at very low temperatures.

Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)

Receiver
Receiving System: True diversity

Image Rejection: 60 dB nominal, 55 dB minimum

RF Sensitivity: 20 dBuV at 60 dB S/N ratio

Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV

Antenna Input: BNC-type, 50 ohms

Bias voltage 12V DC, 60 mA, each

Power Requirements: 12-18V DC, 500 mA

Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.

Net Weight: 1.1 kg (38.8 oz), without accessories

Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

Body Pack
RF Power Output    High: 30 mW, Low: 10 mW (switchable), at 50 ohms

Spurious Emissions: Following federal and national regulations

Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V

Batteries: Two 1.5V AA, not included

Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)

Depending on battery type and use pattern.

Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H

Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in


VWTTM

Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.


Superior specs.

Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)

Cable tone simulation.

Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.


Compander free.

Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.

 Polycarbonate Stompbox-style System
Transmission FormatLine 6 proprietary digital audio transmission
Frequency Response10Hz - 20kHz
Dynamic Range118 dB
RF Carrier Frequency2.4GHz
Operating modesRF1
Compatible Channels6
Transmission Range100 feet line-of-sight (may vary due to local conditions)
FCC ApprovalPart 15 approved, no user-license required

 

Set composed of:

  • 1 x LDWIN42R2
  • 2 x LDWIN42BP
  • 2 x LDWS100GC

Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.

With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).

The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.

The half-rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.

  • UHF frequency range 734 - 776 MHz
  • 1680 frequencies
  • 20 groups with 577 fixed frequencies
  • user bank with 1680 freely selectable frequencies in 25 kHz increments
  • 255 addresses selectable
  • channel scan
  • true diversity receiver
  • interchangeable microphone capsules (dynamic / condenser)

 

Receiver display

  • volume
  • radio frequency level antenna A/B
  • audio level
  • battery status of transmitter
  • transmitter sync via infrared
  • squelch setting in menu
  • equalizer setting in menu
  • naming template in menu
  • 10 sets storable
  • lockable menu
  • balanced XLR output, unbalanced 6.3 mm jack
  • adjustable output
  • adjustable headphone output
Transmitter Display
  • battery status
  • RF power
  • AF power
  • additional system information
Technical Specifications WIN42 Receiver
  • Model Name: LDWIN42R
  • Channels: 1680 (20 groups + 1 user group)
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • THD:
  • Signal/Noise ratio: >100 dB
  • Audio Output: XLR balanced / 6,3 mm Jack unbalanced
  • Power Supply: external power adapter 13,5 V DC, 500 mA
  • Dimensions (W x H x D): 212 x 44 x 184 mm
Technical Specifications Handheld Transmitter
  • Model Name: LDWIN42MD
  • Channels: 1680
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • RF output power: adjustable 10 mw / 30 mw / 50 mw
  • Power requirement: 2 x AA size batteries
  • Operating time: >13 h with alkaline batteries
  • Dimensions (L x Ø): 255 x 52 mm
Technical Specifications Beltpack Transmitter
  • Model Name: LDWIN42BP
  • Channels: 1680
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • RF output power: adjustable 10 mw / 30 mw / 50 mw
  • Input Connector: mini XLR 3-pole (phantom power for headset)
  • Power requirement: 2 x AA size batteries
  • Operating time: >14 h with alkaline batteries
  • Dimensions (W x H x D): 87 x 25 x 63 mm

 

Set composed of:

  • 1 x LDWIN42R
  • 1 x LDWIN42BP
  • 1 x LDWS100GC

Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.

With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).

The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.

The half-rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.

  • UHF frequency range 734 - 776 MHz
  • 1680 frequencies
  • 20 groups with 577 fixed frequencies
  • user bank with 1680 freely selectable frequencies in 25 kHz increments
  • 255 addresses selectable
  • channel scan
  • true diversity receiver
  • interchangeable microphone capsules (dynamic / condenser)

 Receiver display

  • volume
  • radio frequency level antenna A/B
  • audio level
  • battery status of transmitter
  • transmitter sync via infrared
  • squelch setting in menu
  • equalizer setting in menu
  • naming template in menu
  • 10 sets storable
  • lockable menu
  • balanced XLR output, unbalanced 6.3 mm jack
  • adjustable output
  • adjustable headphone output
Transmitter Display
  • battery status
  • RF power
  • AF power
  • additional system information
Technical Specifications WIN42 Receiver
  • Model Name: LDWIN42R
  • Channels: 1680 (20 groups + 1 user group)
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • THD:
  • Signal/Noise ratio: >100 dB
  • Audio Output: XLR balanced / 6,3 mm Jack unbalanced
  • Power Supply: external power adapter 13,5 V DC, 500 mA
  • Dimensions (W x H x D): 212 x 44 x 184 mm
Technical Specifications Handheld Transmitter
  • Model Name: LDWIN42MD
  • Channels: 1680
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • RF output power: adjustable 10 mw / 30 mw / 50 mw
  • Power requirement: 2 x AA size batteries
  • Operating time: >13 h with alkaline batteries
  • Dimensions (L x Ø): 255 x 52 mm
Technical Specifications Beltpack Transmitter
  • Model Name: LDWIN42BP
  • Channels: 1680
  • Frequency range: 734 - 776 MHz
  • Audio Frequency response: 60 Hz - 16 kHz
  • RF output power: adjustable 10 mw / 30 mw / 50 mw
  • Input Connector: mini XLR 3-pole (phantom power for headset)
  • Power requirement: 2 x AA size batteries
  • Operating time: >14 h with alkaline batteries
  • Dimensions (W x H x D): 87 x 25 x 63 mm
Weight1 kg2.00 kg0.35 kg2.00 kg2.00 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1 kg
Weight 2.00 kg
Weight 0.35 kg
Weight 2.00 kg
Weight 2.00 kg
Weight 2.00 kg