| Content | The sense of freedom that comes with a wireless kit can't be beaten. The freedom to move around the stage during a song, the ability to walk out across the floor during sound check to hear how your band sound to the audience, that moment where you end standing proudly on the bar amidst a cheering crowd. Wireless kits give you so much more choice when performing. (cheering crowd and irritated bartender sold separately)
Even if leaping from the stage isn't for you, the WMS 40 is still a great choice for sound. AKG have a great reputation for quality and tone. Crystal clear sound and high end transmission and receiving technology means no loss of sound quality, a common issue with some cheaper wireless kits.
Plug and Play
The WMS40 Mini wireless microphone system provides crystal clear sound and is a true plug'n'play solution. Up and running in a second, it is the optimum wireless solution for small stages, clubs, places of worship, hotels, and gyms. The system is available in different application optimized set packages, all of which includes a universal, switched mode power supply for worldwide operation.
Long lasting
The WMS40 Mini system stands out for its extremely long battery life of 30 hours with a single AA battery which helps saving money in the long run
Dual input/output
Unlike a lot of wireless kits that only handle 1 signal at a time the Mini2 allows you to either have 2 guitars setup and ready with the same reciever or to give the spare trnasmitter to your second guitarist/ bass player. This means less equipment to carry around and less clutter on stage. You can even make quick guitar changes with each running through an independant channel. No more unclipping and unplugging your transmitter while the audience waits.
Features
- Up to 30 hours playtime with one single AA battery
- Plug and Play
- Gain control on pocket transmitter
- Compatible with all AKG MicroMics
- Low battery indicator
- The WMS 40 Mini2 Instrumental Set Dual ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off simultaneously.
The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR input allows you to connect every compatible AKG miniature microphone. Battery life is the same legendary 30 hours off a single AA battery as for the standard WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI2 receiver, 2 PT 40 MINI bodypack transmitters, 2 MKG L instrument cables, a universal power supply with US/UK/EU adapters, and 2 AA size dry batteries.
Features
- Up to 30 hours playtime with one single AA battery
- Plug and Play
- Gain control on pocket transmitter
- Compatible with all AKG MicroMics
- Low battery indicator
Specifications
Audio
- Audio Frequency bandwidth 40 to 20000 Hz
- Signal to Noise 110 dB-A
- THD at 1 kHz 0.8 Prozent
- Operating temperature range -10 to 55 Celsius
- Radio Sensitivity -100 dBm
- Recommended simultaneous channels 3
- Number of selectable frequencies 1 Fixed frequency
- Frequency Selection Fixed frequency
- Radio Range (Line of Sight) 20m
- Modulation FM
- Transmitter Synchronization: Not necessary
- HiQnet compatible No
- Racksize 1/3 Racksize (19“)
- Rackheight 1 RU
Outputs
- Amount 2
- Type Balanced Jack (1/4“)
- Gender Female
- Contacts 3-pin
- Note Balanced audio output adjustable from mic to line level. Output level at rated deviation: 500 mV rms
Power
- Type DC Socket
- Voltage 12 to 12 V
Design
Dimensions / Weight
- Length 132 mm
- Height 43 mm
- Width 133 mm
- Net Weight 581 g
Optional microphones for PT 40 Mini |
WMS470 is a professional multichannel wireless microphone system with pilot tone transmission to prevent unwanted noise. The Sport Set includes a PT470 body-pack transmitter in a compact and rugged housing. The package also enclose a C544 L condenser head-worn microphone featuring a cardioid polar pattern and an external shock mount for high mechanical-noise rejection. Its moisture shield ensures a high degree of humidity protection for the microphone.
The WMS470 Sports Set package includes:
1 x SR470 Receiver
1 x PT470 Body-pack transmitter
1 x C544 L Head-worn microphone
1 x Rack mount kit, 1 x Universal power supply with US/UK/EU adapter, 1 x AA size battery, 2 x Antennas, 1 x Belt clip
|
AKG WMS 470 Wireless Instrument Set has an automatic frequency setup function that immediately finds and displays all available channels. WMS470 by AKG operates up to 16 channels simultaneously within the same frequency band and up to 48 channels by using multiple frequency bands. AKG WMS 470 wireless system includes an AKG PT470 transmitter, AKG SR470 receiver and an MKG L instrument cable. WMS470 instrument set incorporates handheld, headworn and lavalier mic options. |
Evolution wireless D1 Instrument-Set with CL1 cable for live stage use. Evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. ew D1 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission. |
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
|
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
| |
Bandwidth
|
64 MHz
| |
Oscillation Mode
|
PLL-Synthesized
| |
Channel Grid
|
25 kHz
| |
Frequency Stability
|
±0.005% (-10~+60℃)
| |
Modulation Mode
|
Digital Modulation
| |
Output Power
|
10 ~ 100 mW (country dependent)
| |
Spurious Rejection
|
| |
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
| |
T.H.D.
|
| |
ADC Dynamic Range
|
112 dBA
| |
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
| |
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
| |
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
| |
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
| |
Impedance
|
≧ 16 Ω
| |
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
| |
Antenna Connector
|
TNC (50 Ω impedance)
| |
Power Supply
|
DC 12~15V
| |
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
| |
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
| |
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
- The ACT-828 is an EIA standard 1U dual channel receiver with metal chassis.
- A full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. All controls are intuitive and easily accessible, allowing for quick and easy system setup via a single rotary control.
- Enhanced RF circuitry improves anti-interference characteristics and system compatibility with a 64 MHz-wide bandwidth, allowing more interference-free channels to be selected.
- New digital diversity receiving technology eliminates signal dropout and enhances receiving range.
- Full-range sound quality is not affected by the strength of RF signals or operating distance.
- Digitally-processed RF circuitry and DigitnamicPlus™ technology eliminates compander noise, assuring a wireless sound quality that easily rivals cable transmission.
- Improved proprietary Audio A/D Converter provides a true dynamic range of 115 dBA, T.H.D.
- AES3id Digital Audio Interface facilitates a direct connection to digital mixing consoles and transmits signal without distortion, ensuring a stable S/N ratio which will not deteriorate in long distance transmission.
- Proprietary 256-bit encryption provides secure audio transmission, preventing unauthorized listening.
- 10 built-in SmartEQ™ presets and user-defined microphone capsule equalization allows faithful sound reproduction to suit artistsʼ preferences.
- 10 built-in digital anti-feedback SmartEQ™ presets minimize feedback effectively without sacrificing sound quality.
- Optional MIPRO RCS2.Net software allows real-time network remote-controlling and monitoring of 64 systems.
| | Frequency Range | 480~544MHz（US & EU）
540~604MHz（US & EU）
636~700MHz（EU）
696~760MHz（EU）
760~824MHz | | | | Bandwidth | 64 MHz | | | | Preset Frequency | 12 non-interference compatible frequencies in group 1-10.
16 non-interference compatible frequencies in group 11-16.
16 user-defined frequencies can be stored in group 18.
216 preset frequencies in total. | | | | Channel Grid | 25 kHz | | | | Channel Set-up | Scan & ACT sync | | | | Audio Sampling | 24-bit / 44.1 kHz Rate | | | | Audio Compression | 2nd Generation DSP inertial coding | | | | Latency | | | | | Frequency Response | 20 Hz~20 kHz (-2dB) | | | | S/N Ratio (analog output) | > 115dB(A) | | | | T.H.D. | | | | | Encryption | 256 bit | | | | Receivers | | | | Chassis /Channel | EIA Standard 19 " 1U, Dual | | | | Sensitivity | 15 dBμV at S/N≒118 dBA | | | | Image and Spurious Rejection | > 85dB | | | | Receiving Mode | Digital Diversity | | | | Analog Output | Balanced XLR × 2
Unbalanced 6.3 mm (1/4 ") × 2 | | | | Analog Output Switch | Mic / Line × 2 | | | | Digital Audio Interface | AES3id output. BNC female × 2 | | | | Digital Equalizer | 10 microphone capsule modeling presets | | | | Digital Anti-feedback Equalizer | 10 anti-feedback microphone capsule modeling presets | | | | PC Interface | USB or RS-232 Interface. Proprietary MIPRO ACT-BUS | | | | Display | Full-color VFD | | | | Battery Meter | Transmitter battery status | | | | Antenna Input | 50Ω TNC Female Connector × 2 | | | | Power Supply | Built-in 100~240V AC switching power supply; Power Consumption: 15W | | | | Dimensions (W×H×D) | 420 × 44 × 245 mm (16.5 × 1.7 × 9.6 ") | | | | Weight | Approx. 2.2 kg (4.8 lbs) | | | | Transmitter | ACT-80H / 80HC Handheld, ACT-80T / 80TC Bodypack & TA-80 Plug-on Transmitter | | | | Operating Temperature | -10~+60 ℃ | | | | Notes | Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries. |
|
Reviews
There are no reviews yet.