VOX MINI3-G2-BK PORTABLE AMPLIFIER FOR GUITAR

Info

MINI3 G2 Guitar Amp Combo, Black. The VOX MINI3 G2 Modeling Guitar Amplifier Combo in Black is the next generation model of the definitive portable modeling amp, the original MINI3. Based on technology that originated in the legendary Valvetronix series, the VOX MINI3 G2 offers 11 wide-ranging amp models that are more than capable of covering every musical genre. Accompanying these are eight on-board effects that include four separate delay and reverb variants. To further compliment the on-board effects and amp models, the MINI3 G2 also features the proprietary Bassilator circuit. This covers the ultra-low frequency tones that cannot be easily obtained through the use of a standard EQ. This is especially useful on high-gain amp models as it produces an incredibly heavy sound that does not seem possible from an amp of this size. Thanks to it's diminutive size and lightweight, the VOX MINI3 G2 in Black is highly portable and gives a previously unobtainable level of freedom to any player. Coupled with it's dual power options, it can run off either the included AC adaptor or 6 AA batteries, the MINI3 G2 quickly becomes the ideal amp for the guitarist on the go. The main features of the VOX MINI2 G2 Modeling Guitar Amp Combo include: - 11 legendary Amp Models - BTQ Clean, Black 2x12, Tweed 4x10, AC15, AC30TB, UK'70s, UK '80s, UK '90s, Cali Metal, US Higain and Line - 8 on-board effects - Comp, Chorus, Flanger, Tremolo, Analog Delay, Tape Echo, Spring and Room Reverb - 3 watt RMS output - 1x5" Speaker - Seperate guitar, mic and aux inputs - Headphone output - Built-In tuner - Mains and battery power options - Includes carrying strap - Weight - 3 kg/6.61 lbs - Black finish with black grill cloth

Marshall 1974X 18W Handwired Combo Guitar Amplifier

The 1974X is an authentic re-issue of the fabled model 1974 combo of the late sixties (1966-1968). Just like the original, it boasts a point-to-point, handwired, tagboard circuit housed in an aluminium chassis, plus a valve-driven tremolo circuit. At the very heart of its simple, but effective, two channel design can be found six valves: three ECC83s in the preamp, an EZ81 rectifier and a pair of cathode biased EL84s in the power stage. As the output and mains transformers are vital components in any amplifier as they influence performance, sound and feel, Marshall worked extremely closely with their associates at Dagnall in order to duplicate the original, "off-the-shelf" transformers in all areas.

Another major contributing factor to the distinctive sound of vintage 1974 combos is the way the original 20 Watt, ceramic magnet, Celestion Greenback T1221 loudspeaker's tone has softened with age.

In order to recreate the gorgeously smooth tones of a 35-year-old vintage Greenback, Celestion not only revisited the 1967 recipe for the speaker, they also came up with a proprietary way of "aging" the speakers so they sound and feel like the originals made in the late '60s! The same exact, exclusive "aged" T1221 Greenback speaker is also found in the 1974CX, a 1x12" extension cabinet for the 1974X.

The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.

Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30

Those instantly recognizable, warm British sounds you've come to expect from VOX are alive and well in the compact, 10-Watt Pathfinder 10 combo - plus a high gain capability that's thoroughly modern!

This 10-Watt, 1 x 6.5" combo's eye-catching looks are also classic VOX and include basket-weave, leather-look vinyl, our distinctive diamond grille cloth and, of course, chicken head knobs! Small but all-important details such as gold beading and white piping have also been faithfully reproduced, perfectly recapturing the legendary look of VOX.

Little Yet Loud!
The Pathfinder 10's powerful yet always tone-filled 10-Watt output, makes this amp perfect for home practice, backstage warm-up and recording. The Clean/Overdrive switch allows you to change instantly between clean and dirty sounds. With a mere press of this switch you can go from a crystal clear clean sound to our uniquely warm distortion; or from a slightly crunchy bluesy tone to a high-gain, modern-rock roar.

Headphone/Lineout jack
Want to practice late at night without disturbing your neighbours? No problem! Just plug your headphones into the Headphone/Line Out jack and away you go - your sleeping neighbours won't hear a thing because using this jack automatically mutes the amp's speaker! This jack also doubles as a specially filtered Line Out which is perfect for recording your amp without having to worry about setting up any pesky microphones. The Pathfinder 10 also features controls for Gain, Treble, Bass and Volume plus a Clean/Overdrive switch.

• Input Jacks. This, believe it or not, is where you plug your guitar into the amp!
• Gain Control. This adjusts the overall preamp gain of the amplifier. This control can produce a wide variety of killer tones - from clean to crunchy to crazy and all points in-between! What you get all depends on how you set this control and also how you have the Clean/Overdrive Switch (3) set. In both Switch modes - Clean & Overdrive - turning the Gain control down (i.e. counter clockwise) will clean up your sound while cranking it up (i.e. turning it clockwise) will dirty things up. The possibilities are endless.
• Clean/Overdrive Switch. As its name suggests, this switch puts the preamp of the Pathfinder 10 in one of two distinctly different modes -Clean (switch "out“) or Overdrive (switch "in“). And, as you'd expect, the Overdrive mode has bags more gain than the Clean mode. So, if you want more gain just press this button in and let rip!
• Treble Control. This adjusts the treble (high) frequencies in your tone. It can take your sound from soft and round, to bright and cutting, and any point in-between.
• Bass Control. This adjusts the bass (low) frequencies in your tone. It can take your sound from warm and light, to dark and heavy and any point in-between.
• Volume Control. This determines the overall volume of the amplifier. Setting this control high while keeping the Gain low works well for clean sounds (HINT: make sure the Clean/Overdrive Switch is "out" if you wanna go clean!), while setting the Master Volume lower, engaging the Overdrive mode and turning up the Gain will give you a fat, distorted sound at a lower, "bedroom friendly" volume.
• Headphone/Line Out Jack. This dual output carries a specially filtered signal for use with either headphones or for direct connection to a soundboard or recording console. The LINE OUT gives you a good sounding signal for recording or live work without having to mic up the amp. Inserting a jack-plug into this jack will mute the internal speaker.
• Power ON/OFF Switch & LED. On/Off switch for mains (AC) power to amplifier. Plus power indicator LED.

• Circuitry: Solid-State
• Output: 10-Watts RMS
• Speakers: Vox Bulldog x 1 (6.5“, 8 ohm)
• Controls: Gain, Treble, Bass, Volume, Clean/Overdrive Switch, Power On/Off
• Input: Input Jack
• Outputs: Headphone/Line Out Jack
• Dimensions: 380mm(w) x 260mm(h) x 170mm(d) / 14.96“(w) x 10.24“(h) x 6.69“(d)
• Weight: 4.8Kg/10lbs

From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM

Marshall JVM 205C Specs:

50W power
All-valve, with 5 x ECC83s, and 2 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England