| Content |
- Extremely rugged, ergonomically designed housing.
- The unique flat top multi-layered steel grille protects the capsule against impact, rolling, pop noise and ensures sound clarity.
- The unique flat top multi-layered steel grille for condenser capsules and round top for dynamic capsules protect the capsule against impact, rolling and pop noise. The upper grille is able to be detached easily for cleaning and hygiene practices.
- Premium true condenser microphone capsule provides high fidelity, wide frequency response, high dynamic range, rapid transient response, clarity and accurate sound reproduction.
- Proprietary lockable silent on/off switch to avoid accidental power-off during performance.
- Impact-resistant battery compartment holds 2 AA batteries.
- Interchangeable colored rings for microphone channel identification on stage.
- LCD displays group, channel, battery level & error message codes.
- Low spurious PLL-synthesized technology enhances frequency stability and reliability. Patented "Built-in” antenna design.
- Worldʼs first ACT™ function provides precise and rapid frequency sync to the transmitters.
- Industryʼs only digital master control can be adjusted manually or wireless via new ACT-30Hr handheld transmitter microphone. (for MA-708 & MA-808 portables)
|
Built-in Volume Control
|
Yes. For MA-708 & MA-808 portable installed with MRM-70 & MRM-72 receiver modules.
| |
Housing
|
Rugged Plastic
| |
Oscillation Mode
|
PLL Synthesized
| |
Frequency Range
|
UHF 480~934MHz
| |
Bandwidth
|
24MHz
| |
Channel Set-Up
|
ACT Sync
| |
RF Output Power
|
10~30mW (country dependent)
| |
Spurious Emissions
|
|
|
PT 4000
UHF bodypack transmitter with magnesium body
30 MHz wide UHF band with up to 1200 selectable frequencies
Backlit display and jog switch for ease of use
Operates for up to 15 hours on dry batteries, 12 hours on optional BP 4000 battery
pack and displays remaining battery life
Optional remote mute switch
The PT 4000 is a professional bodypack transmitter with a rugged die-cast magnesium
body. The 30 MHz wide UHF band provides up to 1200 selectable frequencies and
several preset frequency banks for various countries make it easy to set up a multichannel
system. A backlit display makes it very easy to tune the PT 4000 to the same frequency
as the SR 4000 receiver. A pilot tone system continuously transmits transmitter status
data including MUTE switch position and the remaining battery life to the receiver. Integrated
charging contacts let you charge the optional BP 4000 battery pack without having to
remove it from the transmitter.
An optional remote mute switch allows the user to mute the transmitter without having
to fumble for the on-board mute switch if the transmitter is hidden in the clothes.
Available microphones for PT 4000: C 411 L, C 416 L, C 417 L, C 418 L,
C 419 L, C 420 L, C 444 L, C 477 WR L, CK 55 L, CK 77 WR L,
CK 97-CVR WL
SPECIFICATIONS:
Carrier frequency range 650 to 680, 680 to 710, 720 to 750, 760 to 790,
790 to 820, 835 to 862 MHz
Modulation FM
Audio bandwidth 35 to 20,000 Hz
Selectable channels 1200
Max. channels for multichannel operation > 50
THD typ. |
- Handheld with dynamic capsule
- Switchable Gain level (20 dB)
- Easy handling and setting of the 16 channels via ASC infrared frequency scanning
- Low-battery indicator
- Up to 10 hours of operation with 2 AA batteries (depending on the type)
- Soft-touch surface
|
Modulation
FM (45 kHz max. deviation)
Frequency Range
470–952 MHz (depending on region)
Tuning Bandwidth
Up to 80 MHz (depending on region)
Antenna
Dipole, UR3 housing and attached microphone form the antenna
Carrier Frequencies
Up to 3200, tunable in steps of 25 kHz (depending on region)
RF Power Output
Selectable 10 mW or 50 mW maximum, depending on region
Power Requirements
Two (2) 1.5V AA alkaline
Battery Life
10 Hours (alkaline) with no phantom power @ 10 mW, typical (frequency band dependent)
4 Hours (alkaline), with 48 V phantom power @ 50 mW, typical (frequency band dependent)
Gain Adjustment Range
-10 to +20 dB, MIC or LINE input setting
Pilot Tone
32 kHz
Frequency Stability
± 0.0015%
Spurious Radiation
75 dB below carrier (typical)
Equivalent Input Noise
-127.0 dBV, A-weighted (audio front end)
Maximum Audio Input level
+24 dBV (LINE input, 0 dB gain)
-21 dBV (MIC input, 0 dB gain)
Differential Input Impedance
6 kΩ LINE input setting
3 kΩ MIC input setting
System Frequency Response
35 Hz–17 kHz, (+1.5 dB, -3 dB)
Note: Overall system frequency response depends on the microphone element and receiver.
High Pass Filter
Two-pole (12 dB per octave), selectable cut off frequency from 40 Hz to 240 Hz
System THD+N
|
Product type
Wireless Microphone System Accessories
Type
Belt Packs
Transmission frequency range
863.000 - 865,000 MHz
Channels
16
Inputs
Mini-XLR (3-pin) with phantom power (for headset)
Frequency response
60 - 16.000 Hz
Rated HF output power
10
Controls
ASC , Mic / 0dB / -10 dB switch , Power
Indicators
power/battery status low (LED)
Operating voltage
2 x AA battery
Operating time
>10 h (with alkaline batteries)
Width
65 mm
Height
85 mm
Depth
24 mm
Weight
0,1 kg
Other features
incl. batteries , IR frequency synchronisation
|
- Integrated, detachable C 407 lavalier microphone with cable and lavalier clip
- Microphone is easy to remove and attach to user's clothing
- Integrated charging contacts
The WMS 40 Series MP 40 micropen is an incredibly versatile wireless microphone. Hardly any bigger than a ball-point pen, the MP 40 is incredibly easy to use: just put it in your breast pocket and switch it on. You can even remove the tiny lavalier microphone from the transmitter body and use the lavalier clamp to fix the microphone closer to your mouth. The cable is long enough to allow you to hide the transmitter in a pocket.
The MP 40 is also an excellent handheld microphone for interviews and other ENG applications. The high-sensitivity C 407 omnidirectional lavalier microphone has been specifically designed for speech pickup. The MP 40 features a noiseless on/mute/off switch and input gain control for ease of use.
SPECIFICATIONS:
| Carrier frequency range | 710 MHz to 865 MHz | | Audio bandwidth | 40 to 20,000 Hz | | THD | 0.8% typ. | | Signal/noise ratio | 103 dB (A) typ. | | Modulation | FM | | RF output power | 10 mW typ. (ERP) | | Power supply | single 1.5 V AAA size battery | | Battery life | |
|
Reviews
There are no reviews yet.