Content |
- Proprietary over-the-ear, shapeable frame design for an ultra secure, comfortable fit.
- Supplied in three earworn sizes for ideal fit.
- Fixed or detachable boom can be worn on left or right and detached for replacement or servicing.
- Subminiature 3mm omni-directional condenser capsule.
- Resistant to moisture, perspiration and salts.
- Detachable cables with various types of plug are available.
- Soft yet flexible thin boom can be bent 120° and boom holder can be height rotated for an ideal fit.
- Ideal for speech applications.
Capsule Diameter
|
3mmØ omni-directional condenser capsule
|
Frequency Response
|
40Hz~20kHz
|
Sensitivity
|
-56dBV±3dBV/Pa (0dB=1V/Pa)
|
Maximum SPL
|
138dB (Typical, 1%THD)
|
Boom Holder
|
Single-side
|
Plug
|
4-pin mini XLR (screw-lock)
|
Cable Length
|
150cm / 59“
|
Color
|
Beige
|
Weight
|
Approx. 16g / 0.56oz
|
Note
|
Refer to actual product in the event of specification discrepancies
|
| The HCM23 is a ?exible miniature microphone with a simple, fast and comfortable headset system The double vent protection system of the HCM23 makes it ideal for use in theatre and spoken word applications The very small size and the super lightweight provides a comfortable and secure ?t when a discreet, minimum visibility microphone is required Available with 3 different connectors for use with most professional wireless systems currently available
Features
5 mm permanently polarized condenser capsule
Omni-directional polar pattern
Fixed bi-aural headband
Anti-pop screen
Available Connectors: 3.5mm plug (HCM23SE) 3-pin mini XLR (HCM23AK) 4-pin mini XLR (HCM23)
TECHNICAL SHEET
Transducer type: Back electret condenser
Polar pattern: Omni-directional
Frequency response: 20Hz- 20KHz
Sensitivity: -45dB± 3dB
S/N Ratio: >70dB
Nominal Impedance: 1500?± 30%
Power Supply: 1.5V-10V
Colour: Skin
Dimension: Ø5mm
Accessories: Windscreen |
Shure WCM16 Headworn Condenser Microphone
The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.
Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.
The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.
Features:
Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes
Specifications:
Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)
|
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
Included Accessories
- pop filter,
- clip,
- tool kit,
- anti trauma case,
- mini furry,
- micon cable
Type | Condenser | Pick Up Pattern | Omni-directional | Frequency response | 60Hz - 18kHz | Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz | Ιmpedance | 3000Ω | Dimensions | 140.00mmW x 65.00mmH x 200.00mmD | Weight | 6.50gm | Accessories | pop filter, clip, tool kit, anti trauma case, mini furry, micon cable |
| Suggested for Speech, Head-worn microphone, Sports/Aerobics
- Ergonomically optimized behind-the-neck headband
- Moisture shield
- External shock mount for high mechanical-noise rejection
The C 544 L is a head-worn miniature condenser microphone with a convenient behind-the-neck headband. The microphone has a cardioid polar pattern and therefore "prefers” sounds arriving from the front (from the userʼs mouth).
The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm will place the microphone in front of the corner of your mouth to minimize pop noise and protect the microphone from contamination. The supplied windscreen makes the microphone even less susceptible to wind and pop noise.
A special moisture shield on the microphone capsule makes it difficult for moisture and makeup to penetrate into the microphone. This barrier prevents the microphone sound entries from being clogged by sweat or makeup which would make the sound dull and reduce the sensitivity of the microphone. Therefore, never remove the moisture shield from the microphone.
The C 544 L is a condenser microphone and therefore needs a power supply.
Type |
Pre-polarized condenser microphone |
Polar pattern |
cardioid |
Frequency range |
20 Hz to 20,000 Hz |
Sensitivity |
40 mV/Pa (-28 dBV re 1 V/Pa) |
Max. SPL |
126 dB / 130 dB (for 1%/3% THD) |
Equivalent noise level (IEC 60268-4) |
22 dB-A |
Impedance |
200 ohms, electronically balanced |
Recommended load impedance |
>2000 ohms |
Supply voltage |
9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter |
Powering |
approx. 2 mA |
Environment |
temperature: -20°C to +60°C, R.H. at +20°C: 99% |
Cable |
1.5 m (5 ft.) |
Finish |
matte black |
Dimensions |
130 mm (5.2 in.) in dia. |
Net weight |
30 g (1.1 oz.) exc. of connector |
Shipping weight |
200 g / 7.1 oz. |
|
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g)
|
Reviews
There are no reviews yet.