Content |
- Proprietary over-the-ear, shapeable frame design for an ultra secure, comfortable fit.
- Supplied in three earworn sizes for ideal fit.
- Fixed or detachable boom can be worn on left or right and detached for replacement or servicing.
- Subminiature 3mm omni-directional condenser capsule.
- Resistant to moisture, perspiration and salts.
- Detachable cables with various types of plug are available.
- Soft yet flexible thin boom can be bent 120° and boom holder can be height rotated for an ideal fit.
- Ideal for speech applications.
Capsule Diameter
|
3mmØ omni-directional condenser capsule
|
Frequency Response
|
40Hz~20kHz
|
Sensitivity
|
-56dBV±3dBV/Pa (0dB=1V/Pa)
|
Maximum SPL
|
138dB (Typical, 1%THD)
|
Boom Holder
|
Single-side
|
Plug
|
4-pin mini XLR (screw-lock)
|
Cable Length
|
150cm / 59“
|
Color
|
Beige
|
Weight
|
Approx. 16g / 0.56oz
|
Note
|
Refer to actual product in the event of specification discrepancies
|
|
Transducer Condenser Polar Pattern Omnidirectional Frequency Response 30Hz to 20kHz +/- 3dB Dynamic Range (Typical) Not Specified by Manufacturer Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL Maximum Input Sound Level 130dB SPL Power Requirements Operating Current: 500uA Operating Voltage: 1 to 2V Power Supply Voltage: +3V with 2.7k ohm Load +5V with 6.8k ohm Load +9V with 15k ohm Load Output Impedance 2k ohms Output Connectors TA4-Female Connector for Shure Wireless Transmitters Dimensions Not Specified by Manufacturer Weight 0.07 oz (2g) |
Features:
Smallest, lightest, most comfortable microphone of its kind
User-friendly for new and experienced users alike
Excellent for singing and spoken word applications
Extremely popular in houses of worship, theater and broadcast settings
Almost invisible against many skin tones
Rugged, bendable boom assures a custom fit for every wearer
Hands-free, wireless-enabled microphone allows total freedom of movement
Exclusive snap-on cables in 1mm or 2mm diameter for field replacement or compatibility with various wireless systems
Highly resistant to sweat and moisture
High quality voice pickup - more consistent than any lavalier
Excellent rejection of surrounding noise
Reduces feedback in meeting rooms or houses of worship an average of 12dB compared to an omni lavalier
Omnidirectional microphone is virtually immune to wind and breath pops, even without a windscreen
| Suggested for Speech, Head-worn microphone, Sports/Aerobics
- Ergonomically optimized behind-the-neck headband
- Moisture shield
- External shock mount for high mechanical-noise rejection
The C 544 L is a head-worn miniature condenser microphone with a convenient behind-the-neck headband. The microphone has a cardioid polar pattern and therefore "prefers” sounds arriving from the front (from the userʼs mouth).
The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm will place the microphone in front of the corner of your mouth to minimize pop noise and protect the microphone from contamination. The supplied windscreen makes the microphone even less susceptible to wind and pop noise.
A special moisture shield on the microphone capsule makes it difficult for moisture and makeup to penetrate into the microphone. This barrier prevents the microphone sound entries from being clogged by sweat or makeup which would make the sound dull and reduce the sensitivity of the microphone. Therefore, never remove the moisture shield from the microphone.
The C 544 L is a condenser microphone and therefore needs a power supply.
Type |
Pre-polarized condenser microphone |
Polar pattern |
cardioid |
Frequency range |
20 Hz to 20,000 Hz |
Sensitivity |
40 mV/Pa (-28 dBV re 1 V/Pa) |
Max. SPL |
126 dB / 130 dB (for 1%/3% THD) |
Equivalent noise level (IEC 60268-4) |
22 dB-A |
Impedance |
200 ohms, electronically balanced |
Recommended load impedance |
>2000 ohms |
Supply voltage |
9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter |
Powering |
approx. 2 mA |
Environment |
temperature: -20°C to +60°C, R.H. at +20°C: 99% |
Cable |
1.5 m (5 ft.) |
Finish |
matte black |
Dimensions |
130 mm (5.2 in.) in dia. |
Net weight |
30 g (1.1 oz.) exc. of connector |
Shipping weight |
200 g / 7.1 oz. |
|
High-quality permanently polarized condenser headmic with omni-directional pick-up pattern
Τype: | Headset | Series Compatibility: | 3000/5000 Series |
|
ansducer Type
Electret condenser
Polar Pattern
Omnidirectional
Frequency Response
20 to 20,000 Hz
Output Impedance
N / A
Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)
Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL
Signal-To-Noise Ratio
60 dB
Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB
Self-Noise (equivalent SPL, A-weighted, typical)
34 dB
Operating Temperature Range
-18°C (0°F) to 57°C (135°F)
Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1
Power Requirements
+5 V DC (130 μA minimum)
Weight
19.76 g
|
Reviews
There are no reviews yet.