Content |
- Uni-directional pick-up pattern.
- Visually unobtrusive and comfortable to wear.
- Flexible and durable frame with comfortable, soft ear hooks which require no adjustment for optimum comfort.
- Interchangeable MU-53M uni-directional capsule module and MU-55M subminiature waterproof omni-directional capsule module.
- Featuring a high dynamic range and able to withstand a maximum SPL without distortion.
- Capsule module and cable are easily detached from the frame and can be worn on the left or right side of the frame to suit personal preferences.
- The very thin capsule-shaft mount is fully rotatable.
- The capsule-shaft allows for adjustments in length, direction and angle for precise and optimum capsule positioning in relation to the speakers mouth.
- Patented, swiveling earhook design allows for inward rotation, facilitating easy storage, packaging and carriage.
- Available in black and beige colors.
- Flexible gooseneck.
- Supplied as standard with MIPRO's mini XLR plug.
- Features a smooth, warm, natural sound.
- Fold-flat design for easy storage.
Capsule Module
|
10mmØ uni-directional miniature condenser microphone
|
Frequency Response
|
50Hz~18kHz±3dB
|
Capsule Impedance
|
200Ω
|
Sensitivity
|
-46dBV±3dBV/Pa (0dB=1V/Pa)
|
Maximum SPL
|
125dB (Typical, 1%THD)
|
Capsule-shaft holder
|
Dual - left and right side
|
Plug
|
MIPRO's mini-XLR 4-pin plug or TA4F
|
Cable Length
|
150cm / 59.1“
|
Color
|
Black or Beige color
|
Weight
|
30g / 1.1oz
|
|
Transducer Condenser Polar Pattern Omnidirectional Frequency Response 30Hz to 20kHz +/- 3dB Dynamic Range (Typical) Not Specified by Manufacturer Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL Maximum Input Sound Level 130dB SPL Power Requirements Operating Current: 500uA Operating Voltage: 1 to 2V Power Supply Voltage: +3V with 2.7k ohm Load +5V with 6.8k ohm Load +9V with 15k ohm Load Output Impedance 2k ohms Output Connectors TA4-Female Connector for Shure Wireless Transmitters Dimensions Not Specified by Manufacturer Weight 0.07 oz (2g) |
Features:
* Head-worn microphone with continuously adjustable behind-the-neck headband
* External shock mount for high mechanical-noise rejection
* Miniature gooseneck for precise positioning near the user's mouth
* Microphone arm provides choice of left or right-hand use
Specifications:
* Polar pattern: cardioid
* Frequency range: 60 Hz to 20 kHz
* Sensitivity: 5 mV/Pa (-46 dBV)
* Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
* Equivalent noise level: 31 dB-A
* Signal/noise ratio (A-weighted): 63 dB
* Impedance: = 2000 ohms
* Power requirement: 9 to 52 V phantom power to DIN 45596 or battery powering from B 29 L, or AKG bodypack transmitter
* Connector: C 520: 3-pin male XLR; C 520 L: 3-pin mini XLR
* Cable: C 520: 3 m (10 ft.); C 520 L: 1.5 m (5 ft.)
* Finish: matte black
* Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
* Net weight: 26 g (0.9 oz.)
* Shipping weight: C 520: 380 g (13.4 oz.); C 520 L: 260 g (9.2 oz.)
| Shure WH20TQG Dynamic Headset Microphone Shure Performance MicrophonesDynamic Headset Microphone
The improved version of the WH10, the Shure Model WH20TQG is a rugged, light-weight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. The WH20 is suitable for any voice communications application where comfort and reliability are required.
The WH20 TQG has a cardioid (unidirectional) pickup pattern. This provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources, such as air-conditioning, musical instruments and loudspeakers. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency rolloff to compensate for the proximity effect inherent in cardioid microphones during close-talk operation.
An integrated elastic CROAKIES ? headband secures the headset comfortably. The headband, wireframe, and gooseneck are adjustable to accommodate any head size or shape. The WH20 TQG is supplied with a foam windscreen and clothing clip.
Features:
- Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
- The WH20TQG has a miniature four-pin female Tini "QG" connector for direct connection to Shure wireless body pack transmitters - This microphone to be used ONLY with an existing Shure body-pack transmitter.
Transducer
|
Dynamic, close-talking |
Polar Pattern |
Cardioid |
Frequency Response |
50 Hz to 15 kHz, Measured @ 0.3" (8.0 mm) |
Power Requirements |
Dynamic (Requires NO Phantom Power) |
Impedance |
150 ohms (200 ohms actual) |
Output Level |
Open Circuit Voltage: -67 dB/Pa (1.48' / 0.45 m)
1 Pa = 94 dB SPL
Close-talked (@ 0.50" / 12.5 mm) @ 1,000 Hz |
Electromagnetic Hum Sensitivity |
38.4 dB equivalent SPL in a 1 mOe field |
Operating Temperature |
0 to 140°F (-18 to 60°C) |
Storage Temperature |
-20 to 165°F (-29 to 74°C) |
Connector |
TA4F connector for Shure bodypack transmitters |
Cable Length |
4.0' (1.2 m) |
Dimensions |
Not specified by manufacturer |
Weight |
2.2 oz (63 g) including connector |
Packaging Info |
Package Weight |
0.7 lb |
Box Dimensions (LxWxH) |
7.6 x 6.4 x 3.1" |
|
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
Included Accessories
- pop filter,
- clip,
- tool kit,
- anti trauma case,
- mini furry,
- micon cable
Type | Condenser | Pick Up Pattern | Omni-directional | Frequency response | 60Hz - 18kHz | Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz | Ιmpedance | 3000Ω | Dimensions | 140.00mmW x 65.00mmH x 200.00mmD | Weight | 6.50gm | Accessories | pop filter, clip, tool kit, anti trauma case, mini furry, micon cable |
| Headset Mikrofon for WS 100 Series, WS 1000 Series, WS 1616 Series and WS ECO Series
- Uni-directional Electret Condenser Headset Microphone
- Impedance
- Frequency range : 20Hz - 20 KHz
- Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type
Wireless Microphone System Accessories
Type
Headsets
Frequency response
20 - 20.000 Hz
Directivity
cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,06 kg |
Reviews
There are no reviews yet.