Content |
- UHF
- 16 channels with auto-scan
- Easy operation
- Simplify Inventory
Details
Multi-channel UHF receiver for use with the Mipro MA705, 707 and 708 portable PA systems.
Additional Information Manufacturer | MiPro | Application | Vocalist, Speech, Aerobics | Market Sector | Sports, Place of Worship, Education, A/V Corporate |
|
- Ultra-compact, lightweight and rugged magnesium housing.
- 64 MHz wide bandwidth.
- Dual-antenna diversity design eliminates signal dropouts and enhances RF stability.
- lightweight, exceptionally durable magnesium alloy bodypack case.
- LCD screen displays audio & RF metering, battery status bar, group & channel, R/L balance.
- Selectable stereo, mono or mixed output mode.
- PLL-synthesized technology enables large compatible channels operation.
- ACT syncs the transmitter & receiver frequency automatically.
- Menu controls and indicators accessed by three buttons.
- S/N ratio > 95dBA (stereo receiving).
- 95dB stereo separation.
- 20 Hz ~ 15 kHz Frequency Response.
- 0.1% @ 1kHz distortion.
- Earphone output power 120mW @ 16Ω.
- Extended operating hours with 2 AA alkaline batteries.
- Dual unbreakable soft antennas.
Frequency Range
|
480~824 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Compatible Channels & Preset Channels
|
12 compatible channels in group 1-10
16 compatible channels in group 11-16
Testing channels in group 17
16 user-defined channels in group 18
216 preset channels
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
± 0.005% (-10 ~ +60℃)
|
Sensitivity
|
10μV input level, S/N > 90dB (Stereo)
|
Modulation Mode
|
Digital Modulation
|
Receiving Mode
|
Diversity Receiving
|
Channel Set-Up
|
ACT Sync
|
Spurious
|
|
T.H.D
|
0.1%@1 kHz
|
Max. S/N ratio
|
95 dBA (Stereo)
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
Stereo Separation
|
> 95 dB
|
Volume Control
|
126 dB (1dB step)
|
LCD Display
|
audio & RF metering, battery status bar, group & channel, R/L balance
|
Output Jack
|
3.5 mm Ø stereo earphone jack
|
Output Power
|
2 × 120 mW @ (16Ω)
|
Earphone Impedance
|
≧ 16 Ω
|
Power
|
2 "AA” Alkaline batteries
|
Current Consumption
|
Approx. 170 mA
|
Operating Time
|
Approx. 8 hours with 2 AA alkaline (stand-by)
|
Dimensions (W × H × D)
|
63 × 82 × 23 mm (2.6 × 3.2 × 0.9 ")
|
Net Weight
|
Approx. 98 g (3.5 oz) excluding batteries
|
Transmitter
|
MI-909T
|
Operating Temperature
|
-10 ~ +60℃
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
±0.005% (-10~+60℃)
|
Modulation Mode
|
Digital Modulation
|
Output Power
|
10 ~ 100 mW (country dependent)
|
Spurious Rejection
|
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
T.H.D.
|
|
ADC Dynamic Range
|
112 dBA
|
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
|
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
|
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
|
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
|
Impedance
|
≧ 16 Ω
|
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
|
Antenna Connector
|
TNC (50 Ω impedance)
|
Power Supply
|
DC 12~15V
|
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
|
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
| The WMS 40 Mini Instrumental Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters.
The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR output allows you to connect every compatible AKG miniature microphone. Battery life of the transmitter is the same legendary "30 hours off a single AA battery" as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI receiver, a PT 40 MINI pocket transmitter, a MKG L instrument cable, a universal power supply with US/UK/EU adapter, and one AA size dry battery.
User's Manual |
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Metal 1U Rack System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 120 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1
RF2 | Compatible Channels | 14 | Transmission Range | 300 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required | Transmitter Specs | | TBP12 Transmitter | A/D Conversion | 24-bit Delta Sigma, 128 times oversampling | Input Impedance | 1.3 M-Ohm | Connectors | TA4f | Controls | Power On/Off, Channel Select | LEDs Display | Power, Audio Status | LCD Display | Channel Number, Battery Life | Battery Life | Approx. 8 hours (2x AA alkaline batteries) | Receiver Specs | | RXR12 Receiver | D/A Conversion | 24-bit Delta Sigma, 128 times oversampling | Connections | 1/4-inch output, XLR output; Tuner pass-thru | LEDs Display | Audio Status, Transmitter Battery Life, Mute, RF | LCD Displays | Channel Number, Transmitter Battery Life | Controls | Channel select, Cable Tone Simulator, Setup | Power Requirements | IEC connector for internal switching power supply that works worldwide |
|
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
Reviews
There are no reviews yet.