| Content |
- EIA standard 1/2U rack-mountable metal chassis for personal use.
- All controls are intuitive and easily operating via electronic buttons, preventing accidental operation.
- Full-color VFD (vacuum fluorescent display) displays all pertinent parameters on the same screen. Automatic dim for stand-by and lit during performance.
- Each receiver presets 6 groups, and each group presets 8 interference-free channels. A total of 48 preset channels per band.
- Worldʼs first ACT™ function provides precise and rapid frequency sync to the transmitters.
- Advanced diversity receiving circuit for the best elimination of signal dropout and the "PiloTone & NoiseLock” dual-squelch circuits prevent noise interference.
- Three switchable output levels. Output level is accurately pre-adjusted to equal to the microphone capsule sensitivity and ensures optimal performance
- Receiver provides bias for booster where MIPRO antenna systems can be added for extended receiving range and stability
- Stable performance, easy installation and more non-interference channels ideal for stage and PA applications.
|
Channel
|
Single
| |
Chassis
|
EIA-Standard 19" 1/2U
| |
Frequency Range
|
UHF 480~934MHz
| |
Antenna
|
Rear Panel. Detachable.
| |
Preset Frequency
|
48 selectable channels. 8 compatible channels in Group 1~6.
| |
Receiving Mode
|
Diversity
| |
Oscillation Mode
|
PLL Synthesized, Frequency Stability≦±0.005% (-10~+60℃)
| |
Sensitivity
|
10dBμV, at S/N>80dB
| |
S/N Ratio
|
>105dB(A)
| |
T.H.D.
|
|
|
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
30 MHz selection bandwidth (depending on local frequency plans)
- 8 hours of operation with a single AA size battery
- Compatible with all AKG MicroMics
- Low battery indicator
- Smallest and lightest bodypack transmitter in its class
- Complete with MKG L cable for direct connection to electric guitar or bass
The Perception wireless system comes complete with bandwidths up to 30 MHz and excessively low-current transmitters, which are unique in its class, cementing Perception Wireless as one of the most comprehensive systems in its price range.
The Perception Wireless is designed to accommodate musicians and entry-level audio technicians, although it has the capabilities to handle even the most difficult audio setups with up to 8 channels per band.
The pocket transmitter PT45 - which is the smallest in its class - runs on a single AA battery, and is compatible with all AKG MicroMics. The SR45 Stationary Receiver delivers a diversity system, professional XLR and 1/4 inch jack outputs and the SMPS solution. | Achieve onstage mobility at the touch of a button!
Set yourself free with the Alesis GuitarLink Wireless system. Compact, clear sounding, and easy to use, GuitarLink Wireless provides unrestricted action as you move about the stage with your guitar or bass. The unique receiver is battery powered, and small enough to sit anywhere—even in your pedalboard!
ALL-IN-ONE TRANSMITTER
Powered by two AAA batteries, the GuitarLink Wireless transmitter is compact and unobtrusive, so it wonʼt interfere with your playing. The attached cable plugs directly into your guitar or bass. Using the integrated metal clip, the GuitarLInk Wireless transmitter can attach to either your strap, or right to your belt for added comfort.
COMPACT RECEIVER
Unlike bulkier wireless receivers, the GuitarLink Wireless receiver is compact, and is also powered by two AAA batteries. This rare combination provides added versatility, so you can put the receiver almost anywhere. Set it on top of your amp. Mount it to your pedalboard. Place it in your effects rack. The GuitarLink Wireless receiver is ready for anything. Bypass the batteries with the external power adapter for a more permanent setup.
EFFORTLESS AND EFFICIENT
The GuitarLink Wireless system operates in the reliable 2.4 GHz frequency spectrum to provide a clear signal free from interference. After turning both units on, simply press the Pairing buttons on both units to make the connection | Shure QLXD14 Wireless System, 470-534MHz, Includes QLXD1 Bodypack Transmitter, QLXD4 Receiver
The QLXD14 Bodypack Wireless System is part of the QLX-D wireless systems family.
The QLXD14 wireless system includes a QLXD4 receiver, QLXD1 transmitter, a WA305 instrument cable, PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, a zipper bag, two AA Alkaline batteries, and rackmount hardware. The QLXD14 system offers good wireless functionality for demanding live sound events and installations.
300 feet (100 meter) line-of-sight operating range 120 dB dynamic range Digital predictive switching diversity receiver to capture the clearest sound 64 MHz tuning bandwidth Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Selectable display mode showing group/channel, frequency, or battery runtime Rugged metal construction |
- Ultra-compact, lightweight and rugged magnesium housing.
- 64 MHz wide bandwidth.
- Dual-antenna diversity design eliminates signal dropouts and enhances RF stability.
- lightweight, exceptionally durable magnesium alloy bodypack case.
- LCD screen displays audio & RF metering, battery status bar, group & channel, R/L balance.
- Selectable stereo, mono or mixed output mode.
- PLL-synthesized technology enables large compatible channels operation.
- ACT syncs the transmitter & receiver frequency automatically.
- Menu controls and indicators accessed by three buttons.
- S/N ratio > 95dBA (stereo receiving).
- 95dB stereo separation.
- 20 Hz ~ 15 kHz Frequency Response.
- 0.1% @ 1kHz distortion.
- Earphone output power 120mW @ 16Ω.
- Extended operating hours with 2 AA alkaline batteries.
- Dual unbreakable soft antennas.
|
Frequency Range
|
480~824 MHz (country dependent)
| |
Bandwidth
|
64 MHz
| |
Compatible Channels & Preset Channels
|
12 compatible channels in group 1-10
16 compatible channels in group 11-16
Testing channels in group 17
16 user-defined channels in group 18
216 preset channels
| |
Oscillation Mode
|
PLL-Synthesized
| |
Channel Grid
|
25 kHz
| |
Frequency Stability
|
± 0.005% (-10 ~ +60℃)
| |
Sensitivity
|
10μV input level, S/N > 90dB (Stereo)
| |
Modulation Mode
|
Digital Modulation
| |
Receiving Mode
|
Diversity Receiving
| |
Channel Set-Up
|
ACT Sync
| |
Spurious
|
| |
T.H.D
|
0.1%@1 kHz
| |
Max. S/N ratio
|
95 dBA (Stereo)
| |
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
| |
Stereo Separation
|
> 95 dB
| |
Volume Control
|
126 dB (1dB step)
| |
LCD Display
|
audio & RF metering, battery status bar, group & channel, R/L balance
| |
Output Jack
|
3.5 mm Ø stereo earphone jack
| |
Output Power
|
2 × 120 mW @ (16Ω)
| |
Earphone Impedance
|
≧ 16 Ω
| |
Power
|
2 "AA” Alkaline batteries
| |
Current Consumption
|
Approx. 170 mA
| |
Operating Time
|
Approx. 8 hours with 2 AA alkaline (stand-by)
| |
Dimensions (W × H × D)
|
63 × 82 × 23 mm (2.6 × 3.2 × 0.9 ")
| |
Net Weight
|
Approx. 98 g (3.5 oz) excluding batteries
| |
Transmitter
|
MI-909T
| |
Operating Temperature
|
-10 ~ +60℃
| |
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
Reviews
There are no reviews yet.