Content |
- 2-way, bi-amplified, bass-reflex design
- 380mm (15”) B&C neodymium magnet woofer with 75mm (3”) voice coil
- 50mm (2”) exit B&C HF driver with 64mm (2.5’’) voice coil
- Frequency response from 45Hz to 20kHz
- Class D built-in amplifiers, 1100Wrms to the LF and 250Wrms Class G to the HF
- 60°H x 40°V rotatable HF horn
- 35mm (1.38’’) speaker stand socket
- Switch mode power supply
- DSP with 6 EQ presets
- Birch plywood enclosure, scratch resistant black paint finish
- Control panel with XLR input and link, volume, presets, HP filter, ground-lift
- 12 x M10 fly points and two FBT design aluminum handles
- Ideal for live sound reinforcement applications and permanent installations
- Very lightweight
Code: |
35959 |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
1100/250 W RMS |
Built-in amplifier peak LF/HF: |
2200/500 W |
Frequency response: |
45Hz-20Khz -6dB |
Low Frequency woofer: |
1x15 - 3 coil neodymium inch |
High Frequency driver: |
1x2 - 2.5 coil inch |
Maximum SPL cont/peak: |
129/136 dB |
Dispersion: |
60°x40° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
1.2 KHz |
AC Power requirements: |
800 VA |
Input connector: |
XLR with loop |
Power cord: |
5/16.4 m/ft |
Net Dimension (WxHxD): |
425x805x421 - 16.7x31.7x16.6 mm/inch |
Net Weight: |
36.5x80.46 Kg/lb |
Transport Dimension (WxHxD): |
550x915x560 - 21.6x36x22 mm/inch |
Transport Weight: |
58/127.86 Kg/lb |
|
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
|
SPECIFICATIONS
| MODEL | TITAN 15 ACTIVE | GENERAL INFO |
| System type | Active 15" 2-way Bi-Amplified | Frequency response +/- 3db | 50-20kHz | HF SECTION |
| Hf type | Titanium Compression Driver | Horn dispersion (H x V) | 90° x 60° | Hf exit size mm / inches | 25mm / 1“ | PHYSICAL FEATURES |
| Enclosure Material | Injection Moulded Polypropylene | Enclosure Colour | Grey or White or Black | Size (mm/inches) | 381mm / 15“ | IN / OUT PANEL (speaker Level) |
| Input connector | XLR - 1/ 4" Combo jack | AMPLIFIER POWER |
| Power On Protection | Power switch on / off mute | Thermal Protection | Amplifier shutdown, auto reset | Low Line Voltage Shut Down | 60% Nominal line voltage | Driver Protection | Independent LF and HF limiters | DC Protection | Yes | Short Protection | Yes | Controls | High (±10dB) 10kHz Shelving | Dimensions (HxWxD) |
| mm | 708.3mm x 477.8mm x 401.77mm | inches | 27.9" x 18.8" x 15.8“ | Microphone / Transmitter |
| Maximum Input Level | +22dBu | Impedance | 4 Ω | MIXER MODEL |
| INPUT IMPEDANCE | Balanced: 20k ohms Unbalanced: 10k ohms | Clip Limiter | Turns on approx 350W output | Limiter Indicator | Red LED | Power Indicator | Red LED | AC Power details |
| Power Supply | High Efficiency Switching Mode Power Supply | AC Power Options | AC100~120V / 220~240V, 50 / 60Hz | Power On Indicator | LED | Rigging / Bracket / | 10 M8 threaded inserts including 4 | Mounting Options | M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket | Impedance Balanced | Balanced: 1k ohm - Unbalanced: 500 ohm | Line Output |
| Line Output Connector | Switchable LOOP / MIX Balanced Male XLR | Input A - type | Switchable balanced mic or line level input | Input Sensitivity | Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms) | Maximum Input Level | +22dBu | Input Connector | XLR - 1/ 4" Combo jack | Input Impedance | Balanced: 20k ohms Unbalanced: 10k ohms | Input B - type | Line level input | Input Sensitivity | XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms) | Maximum Input Level | +22dBu | Input Connectors | Combo jack: 1/4" - XLR / Summed dual RCA jacks | Bass Response Optimizer |
| (“BRO“™) circuit | +5dB at 60Hz | Subsonic Filter | 30Hz, Second-order filter | Amplifiers |
| Low-Frequency (Class D) | Rated 350W RMS, 700W Peak | High- Frequency (Class A/B) | Rated 70W RMS, 140W Peak | Electronic Crossover | 24dB/octave Linkwitz-Riley | Crossover Frequency | 1.8kHz | Controls | High (±10dB) 10kHz Shelving | Equalization | Low (±10dB) 100Hz Shelving | DIMENSIONS & WEIGHT |
| Net weight ( kg / lbs ) | 23.7kg / 52.67lbs | Gross weight ( kg / lbs ) | 26.94kg / 59.27lbs | |
|
The das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 115 is a compact self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive extended bass & punchy mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible Spls in excess of 130db!. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class. Now supplied with free heavy duty speaker stands!
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
400 Watts RMS per speaker
130dB Maximum SPL
45-20,000Hz frequency range
2 way
14" woofer speaker
1" m-34 compression driver
bi-amplified
Built-in 2-channel mixer
6.3mm (1/4“) jack inputs (mic & instrument level switchable)
Xlr input (mic & instrument level switchable)
Xlr output (linkable)
Lightweight Polypropylene enclosure - only 22.1kg each!
Black finish
>>>INCLUDES FREE HEAVY DUTY SPEAKER STANDS Includes FREE Wharfedale DM 4.0 microphone! |
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
- Composite cabinet makes this powerful speaker strong and lightweight
- Flexible input options for virtually any application
- Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
- Active PA speaker with 15" LF driver and 1,100W Class-D power amp
- Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
- Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
- Bass and Treble EQ controls let you fine-tune your sound
- Dual-angle pole mount socket makes it easy to position for optimum sound coverage
- Injection-molded polypropylene enclosure is strong and lightweight
- Recessed carry handle makes transport and setup easier
- Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design Specification | Detail | Powered | Yes | Power Configuration | Bi-amped | LF Driver Size | 15“ | LF Driver Power Amp | 1,000W (peak) Class-D | HF Driver Size | 1“ | HF Driver Power Amp | 100W (peak) Class-D | Frequency Range | 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB) | Maximum Peak SPL | 130 dB | Horizontal Coverage Angle | 90 degrees | Vertical Coverage Angle | 60 degrees | Enclosure Material | Polypropylene | Mounting Options | Pole, Floor Wedge, Fly | Inputs | 2 x XLR/TRS combo | Outputs | 1 x XLR | Height | 28.3“ | Width | 18“ | Depth | 14.5“ | Weight | 60.9 lbs. | Manufacturer Part Number | M15UL |
|
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features : Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10 fittings (optional detachable flying fittings and forged eye bolt kits available).
Optional DPCN (CobraNet?) digital audio input module available. Specifications:
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
Directivity Factor (Q) |
: |
15.85 |
Directivity Index (DI) |
: |
12 dB |
Maximum Peak Output1 |
: |
138 dB SPL 1m |
Transducer Section |
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia., 76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
Bandpass Nominal Impedance |
: |
4 ohms |
Mid/High Frequency Section |
: |
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in) Dual Coil Differential? transducer |
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
Waveguide |
: |
JBL PT-K64-MHF |
Bandpass Nominal Impedance |
: |
8 ohms
|
System |
|
|
DP2 Internal Amplification Output (at nominal load) |
: |
2200 Watts Peak, 1100 Watts Continuous |
DP2 Output (Continuous IEC shaped pink noise into rated load impedance) |
: |
750LF/350HF Watts |
DP2 Output Section |
: |
2-Channel, Class I |
Audio Input connector: |
: |
XLR with loop-through |
Network Control Connector |
: |
Ethernet, RJ45 |
Signal Processing |
: |
DSP Based, resident in Input Module |
System Management
|
: |
DSP based limiters for mechanical and thermal protection |
AC Power Operating Range |
: |
Auto Select 90-132VAC/ 216-264VAC, 50/60Hz
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/ 240V (-15%, +10%) |
AC Input Connector |
: |
Neutrik PowerCon |
AC Loop-Thru |
: |
Neutrik PowerCon |
AC Current Requirement |
: |
6A per system at 120V, 3A per system at 240V |
Enclosure |
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex? finish.
|
Suspension System |
: |
6 standard air-cargo 3 in. track and 12 M10 fittings
|
Grille |
: |
14 Gauge Black powder-coated perforated steel with foam backing
|
Dimensions (H x W x D) |
: |
914.4 x 528.3 x 624.8mm (36 x 20.8 x 24.6 in) |
Net Weight |
: |
44 kg (97 lb) | |
Reviews
There are no reviews yet.