| Content |
- 2-way, bi-amplified, bass-reflex design
- 380mm (15”) B&C neodymium magnet woofer with 75mm (3”) voice coil
- 50mm (2”) exit B&C HF driver with 64mm (2.5’’) voice coil
- Frequency response from 45Hz to 20kHz
- Class D built-in amplifiers, 1100Wrms to the LF and 250Wrms Class G to the HF
- 60°H x 40°V rotatable HF horn
- 35mm (1.38’’) speaker stand socket
- Switch mode power supply
- DSP with 6 EQ presets
- Birch plywood enclosure, scratch resistant black paint finish
- Control panel with XLR input and link, volume, presets, HP filter, ground-lift
- 12 x M10 fly points and two FBT design aluminum handles
- Ideal for live sound reinforcement applications and permanent installations
- Very lightweight
| Code: |
35959 |
| Configuration: |
2 way |
| Built-in amplifier LF/HF: |
1100/250 W RMS |
| Built-in amplifier peak LF/HF: |
2200/500 W |
| Frequency response: |
45Hz-20Khz -6dB |
| Low Frequency woofer: |
1x15 - 3 coil neodymium inch |
| High Frequency driver: |
1x2 - 2.5 coil inch |
| Maximum SPL cont/peak: |
129/136 dB |
| Dispersion: |
60°x40° HxV |
| Input impedance: |
22 Kohm |
| Crossover Frequency: |
1.2 KHz |
| AC Power requirements: |
800 VA |
| Input connector: |
XLR with loop |
| Power cord: |
5/16.4 m/ft |
| Net Dimension (WxHxD): |
425x805x421 - 16.7x31.7x16.6 mm/inch |
| Net Weight: |
36.5x80.46 Kg/lb |
| Transport Dimension (WxHxD): |
550x915x560 - 21.6x36x22 mm/inch |
| Transport Weight: |
58/127.86 Kg/lb |
| 2-Way Active Bi-amplified Speaker. Simplicity is the core of the project for this loudspeaker enclosure with its unique and innovative design. Flexible, rapid and safe assembling in fixed and mobile installations thanks to the 6 fly points included in the cabinet shape and to the very low weight. Ideal for use as main system for music performances, theatre, P.A, or as a stage monitor, W17As is an exceptionally accurate, highly versatile system, providing a rich and broad range of sound experiences in the most diverse situations.
- High sound pressure levels without distortion.
- Precise and detailed acoustic image.
- 130 dB max SPL.
- 2, class AB, Mosfet amplifiers delivering a total output power of 600 Watts (LF 450 W, HF 150 W).
- 2 indipendent dedicated dynamic processors.
- Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz).
- 15" high efficiency woofer, with lightweight neodymium magnet assembly and 3" voice coil.
- 1,4" compression driver with 2.5" voice coil and titanium diaphragm.
- 60° x 40° constant directivity horn.
- Robust, lightweight and compact cabinet, made from HD polyethylene by rotational molding and equipped with two side handles for easy carry and set-up and with a stand adapter.
- Unique and innovative design which includes 6 sturdy fly points (patented) completely integrated in the cabinet and designed to hang or angle the speaker in the air as required, using any type of hook available on the market.
- The cabinet\'s shape allows for both vertical and horizontal installation (for use as stage monitor).
- Ergonomically designed side handles for easy transportation and set-up.
APPLICATIONS
- Voice reinforcement system.
- Stage monitor.
- Theatrical sound reinforcement.
- Night clubs.
- Ballrooms.
- Conference centers, presentations.
- Houses of worship.
- Small to medium/large-sized main sound reinforcement systems.
- Fill-in and side-fills in larger PA systems. |
The DBR15 achieves best-in-class SPL of up to132dB and delivers the lowest frequency in its lineup. The DBR15 delivers outstanding performance for the main front-of-house sound for the live performance or DJ events that require highly prominent low and more power. |
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
- Composite cabinet makes this powerful speaker strong and lightweight
- Flexible input options for virtually any application
- Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
- Active PA speaker with 15" LF driver and 1,100W Class-D power amp
- Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
- Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
- Bass and Treble EQ controls let you fine-tune your sound
- Dual-angle pole mount socket makes it easy to position for optimum sound coverage
- Injection-molded polypropylene enclosure is strong and lightweight
- Recessed carry handle makes transport and setup easier
- Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design | Specification | Detail | | Powered | Yes | | Power Configuration | Bi-amped | | LF Driver Size | 15“ | | LF Driver Power Amp | 1,000W (peak) Class-D | | HF Driver Size | 1“ | | HF Driver Power Amp | 100W (peak) Class-D | | Frequency Range | 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB) | | Maximum Peak SPL | 130 dB | | Horizontal Coverage Angle | 90 degrees | | Vertical Coverage Angle | 60 degrees | | Enclosure Material | Polypropylene | | Mounting Options | Pole, Floor Wedge, Fly | | Inputs | 2 x XLR/TRS combo | | Outputs | 1 x XLR | | Height | 28.3“ | | Width | 18“ | | Depth | 14.5“ | | Weight | 60.9 lbs. | | Manufacturer Part Number | M15UL |
|
Features:
DH-1K 1.5-inch Titanium Diaphragm Compression Driver
EVS-15K 15-inch Woofer
124 dB max. SPL
500 W Class-D Amplifier
Integrated DSP with FIR filter
Cabinet
Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
124 dB
Frequency Range (-10 dB)
50 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
708 x 432 x 382 mm
Net Weight
22.5 kg
Optional Accessories
---
SH-115A, Dust Cover
F01U270396
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046 |
Specifications
- LF Amplifier Power (RMS): 1000 watts
- HF Amplifier Power (RMS): 250 watts
- Frequency Response (-3dB): 58-18000 Hz
- Frequency Response (-10dB): 50-20000 Hz
- Max. SPL/1m (calc); half space: 133 dB
- Coverage (nominal -6dB) Horizontal: 90°
- Coverage (nominal -6dB) Vertical: 50°
- LF Transducer: DVX3150
- HF Transducer: ND2
- Crossover Frequency: 1500 Hz
- Enclosure Material: Polypropylene
- Flying: Yes
- Input Connections: XLR
- Chassis Size: 15“
- Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
- Weight (net): 50.49 lbs
- Dimensions (H x W x D): 27.24" x 17.56" x 16.18“
|
Reviews
There are no reviews yet.