Content |
- 2-way, bi-amplified, bass-reflex design
- 2 x 380mm (15”) B&C neodymium magnet woofer with 75mm (3”) voice coil
- 50mm (2”) exit B&C HF driver with 64mm (2.5’’) voice coil
- Frequency response from 42Hz to 20kHz
- Class D built-in amplifiers, 1100Wrms to the LF and 250Wrms Class G to the HF
- Switch mode power supply
- DSP with 6 EQ presets
- 60°H x 40°V rotatable HF horn
- Birch plywood enclosure, scratch resistant black paint finish
- Control panel with XLR input and link, volume, presets, HP filter, ground-lift
- 12 x M10 fly points and two FBT design aluminum handles
- Ideal for live sound reinforcement applications and permanent installations
Code: |
35960 |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
1100/250 W RMS |
Built-in amplifier peak LF/HF: |
2200/500 W |
Frequency response: |
42Hz-20Khz -6dB |
Low Frequency woofer: |
2x15 - 3 coil neodymium inch |
High Frequency driver: |
1x2- 2.5 coil inch |
Maximum SPL cont/peak: |
133/136 dB |
Dispersion: |
60°x40° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
1.2 KHz |
AC Power requirements: |
800 VA |
Input connector: |
XLR with loop |
Power cord: |
5/16.4 m/ft |
Net Dimension (WxHxD): |
493x1245x471 - 19.04x49x18.5 mm/inch |
Net Weight: |
52.5/115.74 Kg/lb |
Transport Dimension (WxHxD): |
618x1335x610 - 24.3x53.3x24 mm/inch |
Transport Weight: |
58/127.86 Kg/lb |
|
Features
400 Watt digital bi-amplification
129 dB max spl
Wide dispersion 90 x 60 constant directivity horn
15" High power woofer, 3" voice coil
2" Titanium dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 45 Hz ÷ 20 kHz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 2" 2.5" voice coil
Woofer: 15" 3" voice coil
Input/Output Section
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1300 Hz
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Physical Specifications
Height: 708/27.8 mm/inch
Width: 437/17.2 mm/inch
Depth: 389/15.3 mm/inch
Net Weight: 26/57.32 kg/lbs
|
Features: DH-1K 1.5-inch Titanium Diaphragm Compression Driver EVS-15K 15-inch Woofer 124 dB max. SPL 500 W Class-D Amplifier Integrated DSP with FIR filter Cabinet Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design Maximum Amplifier Output Capability, IHF-A 500 W Amplifier Power RMS 420 W Max. SPL 1m / calc. 124 dB Frequency Range (-10 dB) 50 Hz to 17 kHz Nominal Coverage Angle 90° x 50° (Horizontal x Vertical) Audio Input (LINE 1 or MIC/LINE 2) XLR and 1/4" TRS combination Audio Input (AUX) Stereo RCA, unbalanced Audio Output (LINK OUTPUT) XLR, balanced Digital Signal Processing 28/56-Bit, 48 kHz Crossover Frequency 1.7 kHz Product Dimensions (W x H x D) 708 x 432 x 382 mm Net Weight 22.5 kg Optional Accessories --- SH-115A, Dust Cover F01U270396 VPM 1500, variable speaker pole F01U141047 BS 35, speaker stand F01U141046 |
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 6.5" (Mid), 1.75" (H)
HF Driver Power Amp 500W Class D (Shared Between Mid and HF)
Frequency Range 35Hz-20kHz (-10dB)
Crossover Frequency 500Hz, 2.1kHz
Maximum Peak SPL 134dB
Horizontal Coverage Angle 75 Degrees Axisymmetric
Vertical Coverage Angle 75 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 43.1“
Width 18.5“
Depth 16.8“
Weight 87 lb.
Manufacturer Part Number KW153
|
GENERAL
The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which effortlessly displays the low frequencies, starting at 40Hz. Here he is fed with less than 245 watts. The 1.35-inch compression driver takes it high for his account and get 55 watts of power. This was in fact the RMS power; peaks that are higher are no problem for the amplifier. You are assured of a solid, non-pinched sound.
JB Systems PSA-15 Speaker: Polypropylene
The PSA-15 has a smooth shaped casing made of polypropylene. A light but very strong type of plastic, which is good for long-term protection of the internal components. In addition, he is very practical, with a built-in carrying handle, M8 mounting points, a 35 mm stand adapter and support for monitor use. The latter is excellent as possible, thanks to the angle of the housing.
CONNECTIONS
The back contains the connections with two microphone inputs (XLR, 6.3 mm jack) and a line input (XLR, RCA). The inputs and outputs are balanced. As per the level can be controlled, there is also a master volume and a two-band tone control devices. The PSA 15 is very suitable for mobile use and permanent installation and can be used as PA speaker and be used as a monitor. Monitor Brackets are included. |
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
|
SPECIFICATIONS
| MODEL | TITAN 15 ACTIVE | GENERAL INFO |
| System type | Active 15" 2-way Bi-Amplified | Frequency response +/- 3db | 50-20kHz | HF SECTION |
| Hf type | Titanium Compression Driver | Horn dispersion (H x V) | 90° x 60° | Hf exit size mm / inches | 25mm / 1“ | PHYSICAL FEATURES |
| Enclosure Material | Injection Moulded Polypropylene | Enclosure Colour | Grey or White or Black | Size (mm/inches) | 381mm / 15“ | IN / OUT PANEL (speaker Level) |
| Input connector | XLR - 1/ 4" Combo jack | AMPLIFIER POWER |
| Power On Protection | Power switch on / off mute | Thermal Protection | Amplifier shutdown, auto reset | Low Line Voltage Shut Down | 60% Nominal line voltage | Driver Protection | Independent LF and HF limiters | DC Protection | Yes | Short Protection | Yes | Controls | High (±10dB) 10kHz Shelving | Dimensions (HxWxD) |
| mm | 708.3mm x 477.8mm x 401.77mm | inches | 27.9" x 18.8" x 15.8“ | Microphone / Transmitter |
| Maximum Input Level | +22dBu | Impedance | 4 Ω | MIXER MODEL |
| INPUT IMPEDANCE | Balanced: 20k ohms Unbalanced: 10k ohms | Clip Limiter | Turns on approx 350W output | Limiter Indicator | Red LED | Power Indicator | Red LED | AC Power details |
| Power Supply | High Efficiency Switching Mode Power Supply | AC Power Options | AC100~120V / 220~240V, 50 / 60Hz | Power On Indicator | LED | Rigging / Bracket / | 10 M8 threaded inserts including 4 | Mounting Options | M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket | Impedance Balanced | Balanced: 1k ohm - Unbalanced: 500 ohm | Line Output |
| Line Output Connector | Switchable LOOP / MIX Balanced Male XLR | Input A - type | Switchable balanced mic or line level input | Input Sensitivity | Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms) | Maximum Input Level | +22dBu | Input Connector | XLR - 1/ 4" Combo jack | Input Impedance | Balanced: 20k ohms Unbalanced: 10k ohms | Input B - type | Line level input | Input Sensitivity | XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms) | Maximum Input Level | +22dBu | Input Connectors | Combo jack: 1/4" - XLR / Summed dual RCA jacks | Bass Response Optimizer |
| (“BRO“™) circuit | +5dB at 60Hz | Subsonic Filter | 30Hz, Second-order filter | Amplifiers |
| Low-Frequency (Class D) | Rated 350W RMS, 700W Peak | High- Frequency (Class A/B) | Rated 70W RMS, 140W Peak | Electronic Crossover | 24dB/octave Linkwitz-Riley | Crossover Frequency | 1.8kHz | Controls | High (±10dB) 10kHz Shelving | Equalization | Low (±10dB) 100Hz Shelving | DIMENSIONS & WEIGHT |
| Net weight ( kg / lbs ) | 23.7kg / 52.67lbs | Gross weight ( kg / lbs ) | 26.94kg / 59.27lbs | |
|
Reviews
There are no reviews yet.